SCHURTER 7100.1061.13 Board Mount Fuse - Equivalent & Substitute Parts

Part Overview

The SCHURTER 7100.1061.13 is a 400 mA, 250 V AC/DC board mount fuse with fast blow response characteristics. This component is designed for through-hole radial mounting in standard PCB applications requiring overcurrent protection at moderate current levels. The part maintains Active product status with 1109 units in current inventory. Substitute parts become necessary when addressing supply chain constraints, regional availability requirements, or inventory optimization across manufacturing facilities.

Substiute Parts

7100.1061.13

SCHURTER Inc.In Stock: 11527100.1061.13 Datasheet

Current PartRFQ

7100.1161.13

SCHURTER Inc.In Stock: 9777100.1161.13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SCHURTER 7100.1061.13 is determined by strict equivalence across the following critical parameters:

Current Rating: 400 mA (exact match required) Voltage Rating: 250 V AC and 250 V DC (both must match) Response Time: Fast Blow (characteristic must be identical) Mounting Type: Through Hole (mechanical compatibility requirement) Fuse Type: Board Mount, Cartridge Style Excluded (form factor constraint) Package / Case: Radial, Box (physical footprint requirement) Breaking Capacity: 35 A @ Rated Voltage (performance specification) Melting I²t: 0.088 (thermal characteristic) Operating Temperature Range: -40°C to 85°C (environmental specification) Physical Dimensions: 0.453" L x 0.197" W x 0.315" H (PCB layout compatibility)

The substitute part 7100.1161.13 meets all specified parameters identically, establishing direct parametric equivalence within the FRT 250F series.

Parameter Comparison

Engineering Selection Recommendations

Both the SCHURTER 7100.1061.13 and 7100.1161.13 are Active products with identical electrical, mechanical, and thermal specifications. Both components carry cURus approval certification and maintain ROHS3 compliance, satisfying regulatory requirements for industrial and consumer applications.

Selection between these parts should be based on inventory availability and supply chain logistics. The 7100.1061.13 maintains higher current inventory (1109 units) compared to the 7100.1161.13 (895 units). Both parts are suitable for direct substitution in applications requiring 400 mA overcurrent protection at 250 V AC/DC with fast blow response characteristics.

Frequently Asked Questions (FAQ)

Q: Can 7100.1161.13 be used as a direct replacement for 7100.1061.13?

A: Yes. Both parts are parametrically equivalent across all critical specifications including current rating, voltage rating, response time, mounting type, package dimensions, and thermal characteristics. No circuit redesign or PCB layout modification is required.

Q: Are there any differences in approval certifications between these parts?

A: No. Both parts carry identical cURus approval and maintain ROHS3 compliance status. Regulatory requirements are satisfied equally by either component.

Q: What determines whether a fuse can substitute for another in this category?

A: Substitution requires exact matching of current rating (400 mA), voltage ratings (250 V AC and 250 V DC), response time (Fast Blow), mounting type (Through Hole), fuse type (Board Mount, Cartridge Style Excluded), package form factor (Radial, Box), breaking capacity (35 A), melting I²t value (0.088), operating temperature range (-40°C to 85°C), and physical dimensions (0.453" L x 0.197" W x 0.315" H).

Q: Are the physical dimensions identical for both parts?

A: Yes. Both parts measure 0.453" L x 0.197" W x 0.315" H (11.50mm x 5.00mm x 8.00mm), ensuring identical PCB footprint compatibility and through-hole mounting alignment.

Q: Which part should be selected based on availability?

A: Selection should prioritize current inventory levels and supply chain lead times. The 7100.1061.13 currently maintains higher inventory (1109 units) compared to 7100.1161.13 (895 units). Both are in active stock status.