Qualtek 710-00/28 AC Power Connector: Equivalent & Substitute Parts

Part Overview

The Qualtek 710-00/28 is an IEC 320-C14 power entry connector receptacle with male blades, designed for panel mount applications with quick connect termination. This component is classified as obsolete, necessitating identification of active equivalent alternatives that maintain functional compatibility for replacement in existing designs or new applications requiring this connector category.

Substiute Parts

710-00/28

QualtekIn Stock: 954710-00/28 Datasheet

Current PartRFQ

710W-00/02

QualtekIn Stock: 1425710W-00/02 Datasheet

MFR RecommendedRFQ

6182.0002

SCHURTER Inc.In Stock: 11036182.0002 Datasheet

MFR RecommendedRFQ

6182.0006

SCHURTER Inc.In Stock: 13556182.0006 Datasheet

MFR RecommendedRFQ

6182.0007

SCHURTER Inc.In Stock: 14036182.0007 Datasheet

MFR RecommendedRFQ

6182.0008

SCHURTER Inc.In Stock: 9886182.0008 Datasheet

MFR RecommendedRFQ

EAC305

Switchcraft Inc.In Stock: 1119EAC305 Datasheet

MFR RecommendedRFQ

EAC325

Switchcraft Inc.In Stock: 1159EAC325 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Qualtek 710-00/28 is constrained by the following critical parameters derived from the provided data:

Primary Substitution Criteria:

• Connector Style: IEC 320-C14 (male blades receptacle)
• Mounting Type: Panel Mount, Flange
• Number of Positions: 3
• Filter Type: Unfiltered - Commercial
• Panel Cutout Dimensions: Rectangular - 32.26mm x 24.77mm
• Termination compatibility: Quick Connect or equivalent mechanical interface

Substitution Logic: The provided substitute list contains parts with IEC 320-2-2/F connector style (female sockets), which represents a different connector gender and pin configuration than the original IEC 320-C14 (male blades). Substitution is valid only when the receiving application can accommodate the different connector interface. The Qualtek 710W-00/02 maintains the same manufacturer lineage and panel mount configuration. SCHURTER Inc. parts (6182.0002, 6182.0006, 6182.0007, 6182.0008) and Switchcraft Inc. parts (EAC305, EAC325) provide alternative sources with active product status and enhanced certifications (UL94 V-0 flammability rating, IP20 ingress protection for SCHURTER models).

Parameter Comparison

Engineering Selection Recommendations

Qualtek 710W-00/02 is the primary substitute within the Qualtek product line. It maintains active product status, expands certification coverage to include TUV, and preserves the same manufacturer ecosystem. Panel cutout dimensions (32.50mm x 25.00mm) are compatible with the original specification. Termination differs (0.189" quick connect vs. 0.110"), requiring verification of PCB or wiring interface compatibility.

SCHURTER Inc. Series 5091 (parts 6182.0002, 6182.0006, 6182.0007, 6182.0008) provide enhanced reliability through UL94 V-0 flammability rating and IP20 ingress protection. These parts are suitable for applications requiring higher environmental protection. Panel cutout dimensions (23.20mm x 15.80mm) differ significantly from the original, necessitating panel redesign. Termination options include solder eyelet (6182.0002) and quick connect 0.250" (6182.0006, 6182.0007, 6182.0008). All four SCHURTER variants are functionally equivalent; selection depends on termination method required by the application.

Switchcraft Inc. EAC305 offers solder eyelet termination with panel cutout dimensions (32.39mm x 24.76mm) closely matching the original specification. Certifications include SEMKO and SEV. This option minimizes panel modification requirements.

Switchcraft Inc. EAC325 provides solder tab termination with variable panel cutout sizing, offering design flexibility. Approval agencies are not specified for this part.

Selection should prioritize parts with active product status and certifications matching the original application requirements. Panel cutout dimension compatibility and termination method compatibility are critical factors in component selection.

Frequently Asked Questions (FAQ)

Q: Can the Qualtek 710-00/28 be directly replaced with any of the listed substitutes?

A: Direct replacement depends on connector gender compatibility. The original part features male blades (IEC 320-C14), while all listed substitutes feature female sockets (IEC 320-2-2/F). Substitution is valid only if the mating connector in the application is compatible with the female socket configuration. Panel cutout dimensions and termination methods must also be verified for mechanical and electrical compatibility.

Q: What is the primary difference between the Qualtek 710W-00/02 and SCHURTER 6182 series?

A: The Qualtek 710W-00/02 maintains compatibility with the original panel cutout dimensions (32.50mm x 25.00mm vs. 32.26mm x 24.77mm). SCHURTER parts require a smaller panel cutout (23.20mm x 15.80mm), necessitating panel redesign. SCHURTER parts provide enhanced environmental protection through UL94 V-0 flammability rating and IP20 ingress protection, which the Qualtek substitute does not specify.

Q: How do termination differences affect component selection?

A: The original part uses quick connect 0.110" (2.8mm) termination. Substitutes offer three termination methods: quick connect 0.189" (Qualtek 710W-00/02), quick connect 0.250" (SCHURTER 6182.0006, 6182.0007, 6182.0008), solder eyelet (SCHURTER 6182.0002, Switchcraft EAC305), and solder tabs (Switchcraft EAC325). Selection must match the PCB or wiring interface specifications of the target application. Quick connect sizes are not interchangeable.

Q: Are all SCHURTER 6182 variants functionally equivalent?

A: SCHURTER parts 6182.0002, 6182.0006, 6182.0007, and 6182.0008 are functionally equivalent in electrical and mechanical specifications. The primary difference is termination method: 6182.0002 uses solder eyelet, while 6182.0006, 6182.0007, and 6182.0008 use quick connect 0.250". Selection depends solely on the termination method required by the application.

Q: What certifications should be prioritized for safety-critical applications?

A: The original part carries CSA and UL certifications. Qualtek 710W-00/02 expands this to include TUV. SCHURTER parts include cCSAus, UL, and VDE certifications. Switchcraft EAC305 includes SEMKO and SEV certifications. Application requirements and regional regulatory standards should determine which certification set is appropriate. All listed parts maintain ROHS3 compliance.

Q: Can panel cutout dimensions be modified to accommodate SCHURTER parts?

A: Yes, panel cutout modification is possible if the application design allows. SCHURTER parts require rectangular cutouts of 23.20mm x 15.80mm, significantly smaller than the original 32.26mm x 24.77mm. This represents a design change requiring mechanical validation and potential rework of existing panels or tooling.