Equivalent & Substitute Parts for Qualtek 710-00/09

Part Overview

The Qualtek 710-00/09 is a power entry connector receptacle designed for IEC 320-C14 applications with panel mount, flange configuration and right-angle through-hole termination. This component features male blades, solder termination, and is rated for commercial unfiltered applications. The product is currently obsolete, making identification of equivalent substitute parts essential for system redesign, maintenance, and component sourcing in legacy equipment applications.

Substiute Parts

710-00/09

QualtekIn Stock: 1077710-00/09 Datasheet

Current PartRFQ

710W-00/01

QualtekIn Stock: 978710W-00/01 Datasheet

MFR RecommendedRFQ

6182.0033

SCHURTER Inc.In Stock: 107456182.0033 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the Qualtek 710-00/09 are identified based on the following critical parameters that determine functional compatibility:

Primary Substitution Criteria:

• Connector style and type compatibility (IEC 320 series receptacle configuration)
• Number of positions (3-position requirement)
• Mounting configuration (panel mount with flange)
• Termination method (solder-based connection)
• Panel cutout dimensions and thickness tolerance
• Regulatory compliance certifications (CSA, UL, or equivalent)
• RoHS3 compliance status

The substitute parts listed maintain these core electrical and mechanical parameters while offering active product status and improved availability compared to the obsolete 710-00/09.

Parameter Comparison

Engineering Selection Recommendations

Qualtek 710W-00/01 Substitution: The Qualtek 710W-00/01 maintains manufacturer continuity and shares CSA and UL certifications with the original 710-00/09. This part is actively produced and carries expanded regulatory approvals including CCC and TUV. The connector style differs from the original (IEC 320-2-2/F versus IEC 320-C14), and panel cutout dimensions are smaller. This substitute is suitable when manufacturer consistency is prioritized and panel geometry can be accommodated.

SCHURTER 6182.0033 Substitution: The SCHURTER 6182.0033 provides the closest mechanical alignment to the original 710-00/09, with matching panel thickness (0.126" / 3.20mm), through-hole right-angle configuration, and UL94 V-0 flammability rating. Panel cutout dimensions are nearly identical (34.40mm x 25.90mm versus 34.70mm x 26.40mm). This part includes IP20 ingress protection and expanded certifications (CCC, cCSAus, ENEC). The SCHURTER option is recommended when mechanical compatibility and panel integration are critical design factors.

Both substitute parts are RoHS3 compliant, actively produced, and rated for 10A at 250VAC, providing reliable alternatives to the obsolete 710-00/09.

Frequently Asked Questions (FAQ)

Q: Why is the 710-00/09 no longer available? A: The Qualtek 710-00/09 has reached end-of-life status and is classified as obsolete. Active production has ceased, requiring engineers to identify equivalent substitute components for new designs or legacy equipment maintenance.

Q: What are the key differences between the substitute parts? A: The Qualtek 710W-00/01 maintains the same manufacturer but uses a different IEC connector style (320-2-2/F) with smaller panel cutout dimensions. The SCHURTER 6182.0033 provides superior mechanical compatibility with nearly identical panel dimensions and includes IP20 ingress protection. Both are actively produced and RoHS3 compliant.

Q: Can I use either substitute interchangeably with the original 710-00/09? A: Direct interchangeability depends on your specific application requirements. The SCHURTER 6182.0033 offers better mechanical fit due to matching panel thickness and similar cutout dimensions. The Qualtek 710W-00/01 requires panel geometry verification. Both differ in connector style from the original, so electrical interface compatibility must be confirmed for your application.

Q: What certifications do the substitute parts carry? A: The Qualtek 710W-00/01 holds CCC, CSA, TUV, and UL approvals. The SCHURTER 6182.0033 carries CCC, cCSAus, and ENEC certifications. Both meet or exceed the original CSA and UL requirements of the 710-00/09.

Q: Are the substitute parts RoHS compliant? A: Yes, both the Qualtek 710W-00/01 and SCHURTER 6182.0033 are ROHS3 compliant, matching the compliance status of the original 710-00/09.

Q: What is the panel cutout tolerance consideration? A: The original 710-00/09 requires a rectangular cutout of 34.70mm x 26.40mm. The SCHURTER 6182.0033 requires 34.40mm x 25.90mm (0.30mm and 0.50mm smaller respectively), while the Qualtek 710W-00/01 requires 32.50mm x 25.00mm. Verify your panel design can accommodate the substitute part dimensions before selection.