Keystone Electronics 7054 LED Holder T1 3MM - Equivalent & Substitute Parts

Part Overview

The Keystone Electronics 7054 is a T1 LED standoff holder manufactured from natural nylon with a 0.600" (15.23mm) length. This component is designed to mount and position T1 LEDs in electronic assemblies. The part is currently listed as obsolete, making identification of suitable substitute components essential for ongoing production and maintenance applications. Substitute parts must maintain compatibility with T1 LED form factors while meeting the same mechanical and environmental specifications.

Substiute Parts

7054

Keystone ElectronicsIn Stock: 8287054 Datasheet

Current PartRFQ

7375

Keystone ElectronicsIn Stock: 32947375 Datasheet

MFR RecommendedRFQ

LEDS1E-10-01

Essentra ComponentsIn Stock: 1578LEDS1E-10-01 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the Keystone Electronics 7054 are qualified based on the following critical parameters:

• LED Type Compatibility: All substitutes must support T1 LED form factor mounting
• Material Composition: Natural nylon construction required for mechanical and thermal properties
• Environmental Compliance: RoHS3 compliance and REACH unaffected status maintained across all alternatives
• Moisture Sensitivity: MSL rating of 1 or equivalent non-applicable rating acceptable
• Length Tolerance: Mechanical length within acceptable tolerance range for T1 LED standoff applications

Two substitute parts meet these criteria: the Keystone Electronics 7375 (manufacturer recommended) and the Essentra Components LEDS1E-10-01 (parametric equivalent).

Parameter Comparison

Engineering Selection Recommendations

Keystone Electronics 7375 is the primary substitute option. This part is manufactured by the same supplier as the original 7054, maintains identical material composition and environmental compliance certifications, and demonstrates near-exact dimensional equivalence (15.24mm vs. 15.23mm). The 7375 is currently in active production status with substantial inventory availability.

Essentra Components LEDS1E-10-01 serves as a parametric equivalent alternative. This part maintains T1 LED compatibility, natural nylon construction, and full environmental compliance. The length specification of 0.625" (15.88mm) represents a 0.02" (0.65mm) increase over the original part. This dimension variance must be evaluated against specific mechanical constraints in the target application. The LEDS1E-10-01 is actively produced and available in bulk packaging.

Both substitute parts maintain REACH unaffected status and RoHS compliance, ensuring regulatory alignment with the original component.

Frequently Asked Questions (FAQ)

Q: Can the Keystone Electronics 7375 be used as a direct replacement for the 7054?

A: Yes. The 7375 is the manufacturer-recommended substitute with virtually identical specifications. The dimensional difference of 0.01mm falls within standard mechanical tolerances for T1 LED standoff applications.

Q: What is the primary difference between the 7375 and LEDS1E-10-01 substitutes?

A: Both parts maintain T1 LED compatibility and nylon construction. The LEDS1E-10-01 has a length of 0.625" compared to the 0.600" specification of the 7054 and 7375. This 0.025" (0.65mm) difference may affect mechanical fit depending on application-specific clearance requirements.

Q: Are environmental compliance certifications maintained across all substitute options?

A: Yes. All three parts—the original 7054, the 7375, and the LEDS1E-10-01—maintain REACH unaffected status and RoHS compliance. Moisture sensitivity ratings are equivalent or non-applicable across all options.

Q: What packaging formats are available for substitute parts?

A: Both the Keystone Electronics 7375 and Essentra Components LEDS1E-10-01 are supplied in bulk packaging, suitable for production assembly operations.

Q: Should length tolerance be a consideration when selecting a substitute?

A: Length tolerance must be evaluated based on specific mechanical constraints within the target assembly. The 7375 provides the closest dimensional match to the original 7054. The LEDS1E-10-01 introduces a 0.025" length increase that may require mechanical validation in space-constrained applications.