Keystone Electronics 7050 T1 LED Standoff - Equivalent & Substitute Parts

Part Overview

The Keystone Electronics 7050 is a T1 LED standoff manufactured from natural nylon with a length of 0.460" (11.68mm). This component is classified as obsolete, making equivalent and substitute parts necessary for ongoing design and production requirements. The 7050 serves as a mechanical mounting solution for T1 3mm LED applications, providing standardized positioning and spacing in electronic assemblies.

Substiute Parts

7050

Keystone ElectronicsIn Stock: 184677050 Datasheet

Current PartRFQ

7372

Keystone ElectronicsIn Stock: 80717372 Datasheet

MFR RecommendedRFQ

7048

Keystone ElectronicsIn Stock: 11717048 Datasheet

Parametric EquivalentRFQ

7049

Keystone ElectronicsIn Stock: 8357049 Datasheet

Parametric EquivalentRFQ

7051

Keystone ElectronicsIn Stock: 11697051 Datasheet

Parametric EquivalentRFQ

7369

Keystone ElectronicsIn Stock: 156947369 Datasheet

Parametric EquivalentRFQ

7370

Keystone ElectronicsIn Stock: 26397370 Datasheet

Parametric EquivalentRFQ

7371

CEC IndustriesIn Stock: 11197371 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the 7050 is determined by the following critical parameters: LED type (T1), material (nylon), color (natural), and length tolerance. The substitute parts are grouped into two categories:

MFR Recommended Substitute: Part 7372 is the manufacturer-recommended replacement, featuring an active product status and a length of 0.480" (12.19mm).

Parametric Equivalents: Parts 7048, 7049, 7051, 7369, and 7370 are parametric equivalents sharing the same LED type, material, and color specifications. These parts vary in length within the T1 LED standoff range: 0.440" (11.17mm), 0.450" (11.42mm), 0.480" (12.18mm), 0.440" (11.18mm), and 0.450" (11.43mm) respectively. Parts 7369 and 7370 maintain active product status.

Non-Equivalent Part: Part 7371 (CEC Industries) is a lamp assembly and does not qualify as a mechanical substitute due to functional category difference.

Parameter Comparison

Engineering Selection Recommendations

For new designs and production continuity, part 7372 is the primary substitute, offering active product status and manufacturer recommendation. This part maintains full ROHS3 compliance and MSL 1 rating consistent with the original 7050.

For applications where the 0.460" (11.68mm) length of the 7050 is critical, parts 7049 and 7370 provide the closest length match at 0.450" (11.42mm and 11.43mm respectively). Part 7370 is preferred due to active product status.

Parts 7048 and 7369 offer 0.440" (11.17mm and 11.18mm) lengths and are suitable where slightly reduced standoff height is acceptable. Part 7369 maintains active product status.

All recommended substitutes maintain identical material composition (nylon), color (natural), LED type (T1), and regulatory compliance (ROHS3, REACH Unaffected, MSL 1).

Frequently Asked Questions (FAQ)

Q: Can part 7372 directly replace the 7050 in all applications? A: Part 7372 is the manufacturer-recommended substitute and shares all critical parameters except length. The 7372 measures 0.480" (12.19mm) compared to the 7050 at 0.460" (11.68mm), a difference of 0.020" (0.51mm). Compatibility depends on mechanical clearance in the specific application.

Q: What is the difference between the parametric equivalents? A: The parametric equivalents (7048, 7049, 7051, 7369, 7370) are all T1 LED standoffs in natural nylon but differ in length. Selection should be based on the required standoff height for your PCB and LED positioning requirements.

Q: Which substitute parts have active product status? A: Parts 7372, 7369, and 7370 maintain active product status. These are recommended for new designs requiring long-term availability.

Q: Are all substitute parts ROHS3 compliant? A: All substitute parts listed in the parameter comparison table are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity level, matching the original 7050 specifications.

Q: Why is part 7371 not a suitable substitute? A: Part 7371 is a lamp assembly (CEC Industries 12V T-1.75 Bi-Pin lamp), not a mechanical LED standoff. It serves a different functional purpose and is not compatible with the 7050 application.