Amphenol ICC 70430-134 Backplane Connector Header

Part Overview

The Amphenol ICC 70430-134 is a 10-position blade power connector header designed for through-hole PCB mounting. This component features male blades with press-fit termination and is part of the Metral® series. The part is currently classified as obsolete, making identification of suitable alternatives necessary for ongoing system support and new design implementations.

Substiute Parts

70430-134

Amphenol ICC (FCI)In Stock: 117170430-134 Datasheet

Current PartRFQ

70430-134LF

Amphenol ICC (FCI)In Stock: 70770430-134LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 70430-134 is based on the following critical parameters that must remain consistent:

• Connector type: Header, Male Blades
• Connector style: Blade Power
• Number of positions: 10
• Pitch: 0.236" (6.00mm)
• Number of rows: 5
• Mounting type: Through Hole
• Termination method: Press-Fit
• Contact finish: Gold at 30.0µin (0.76µm)
• Material flammability rating: UL94 V-0
• Series: Metral®

The substitute part 70430-134LF maintains these core electrical and mechanical parameters, ensuring functional compatibility in applications requiring the 70430-134.

Parameter Comparison

Engineering Selection Recommendations

The 70430-134LF serves as the direct substitute for the obsolete 70430-134. Both components share identical electrical and mechanical specifications, including connector type, pitch, mounting configuration, and contact characteristics.

The 70430-134LF is currently in active production status, whereas the 70430-134 is obsolete. For new designs and ongoing system support, the 70430-134LF is the appropriate selection.

The 70430-134LF achieves RoHS compliance, whereas the original 70430-134 does not. Applications subject to RoHS regulatory requirements must use the 70430-134LF.

Both components maintain UL94 V-0 flammability certification and unlimited moisture sensitivity rating, ensuring compatibility in equivalent environmental conditions.

Frequently Asked Questions (FAQ)

Q: Can the 70430-134LF directly replace the 70430-134 in existing designs?

A: Yes. The 70430-134LF maintains identical connector type, blade configuration, pitch, row count, mounting method, and contact specifications. Direct substitution is supported at the component level.

Q: What is the primary difference between these two parts?

A: The 70430-134LF is the active production variant with RoHS compliance. The 70430-134 is obsolete and RoHS non-compliant. Both maintain equivalent electrical and mechanical performance.

Q: Are there packaging differences between the 70430-134 and 70430-134LF?

A: The 70430-134LF is supplied in tube packaging. Packaging specifications for the 70430-134 were not provided in the component data.

Q: Do both parts meet the same flammability and moisture sensitivity standards?

A: Yes. Both components are rated UL94 V-0 for material flammability and MSL 1 (Unlimited) for moisture sensitivity.

Q: Which part should be specified for new PCB designs?

A: The 70430-134LF should be specified for new designs. It is in active production and meets current RoHS compliance requirements.