Keystone Electronics 7040 LED Holder T1 3MM - Equivalent & Substitute Parts

Part Overview

The Keystone Electronics 7040 is a T1 LED standoff holder manufactured from natural nylon with a 0.300" (7.62mm) length. This component is designed to mount and position T1 LEDs in electronic assemblies. The part is currently listed as obsolete, making identification of suitable substitute components essential for ongoing production and maintenance applications. Active equivalent parts maintain identical mechanical and electrical specifications while offering improved availability.

Substiute Parts

7040

Keystone ElectronicsIn Stock: 8467040 Datasheet

Current PartRFQ

7361

Keystone ElectronicsIn Stock: 362527361 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Keystone Electronics 7040 is determined by strict equivalence across the following parameters:

• LED Type: T1 (exact match required)
• Length: 0.300" (7.62mm) (exact match required)
• Material: Nylon (exact match required)
• Color: Natural (exact match required)
• Compliance: ROHS3 Compliant, REACH Unaffected (minimum requirements)
• MSL Rating: 1 (Unlimited) (minimum requirement)

The substitute part 7361 meets all these criteria and is classified as an active product with current manufacturing status and improved inventory availability.

Parameter Comparison

Engineering Selection Recommendations

The Keystone Electronics 7361 is the direct equivalent for the obsolete 7040 part number. Both components share identical mechanical dimensions, material composition, and electrical compliance certifications. The 7361 is manufactured by the same supplier and maintains active production status with significantly higher inventory availability (36,218 pcs vs. 751 pcs). Both parts satisfy ROHS3 compliance and REACH unaffected requirements. Selection of the 7361 eliminates obsolescence risk while maintaining full functional and mechanical compatibility in T1 LED mounting applications.

Frequently Asked Questions (FAQ)

Q: Can the 7361 be used as a direct replacement for the 7040? A: Yes. Both parts are identical in LED type (T1), length (0.300"/7.62mm), material (nylon), color (natural), and all compliance certifications. The 7361 is the manufacturer-recommended equivalent.

Q: What is the primary reason to switch from 7040 to 7361? A: The 7040 is obsolete with limited inventory (751 pcs). The 7361 is an active product with substantially higher availability (36,218 pcs), ensuring supply continuity for production and maintenance.

Q: Are there any mechanical or electrical differences between these parts? A: No. Both parts are functionally and mechanically identical. They share the same dimensions, material properties, and performance characteristics for T1 LED mounting applications.

Q: Does packaging differ between the two parts? A: The 7040 packaging is unspecified, while the 7361 is supplied in bulk packaging. Bulk packaging is standard for high-volume applications and does not affect component performance or compatibility.

Q: Are both parts compliant with current regulations? A: Yes. Both the 7040 and 7361 are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Q: What is the MSL rating for these parts? A: Both parts carry an MSL rating of 1 (Unlimited), indicating no moisture sensitivity limitations during storage or handling.