LAPP 701446NP Hood Connector Top Entry NPT-1 HB24 IP65 Equivalent & Substitute Parts

Part Overview

The LAPP 701446NP is an active heavy duty connector hood designed for top entry applications with NPT-1 thread size in the EPIC® HB series. This connector provides IP65 ingress protection (dust tight, water resistant) and operates across a temperature range of -40°C to 125°C. The aluminum alloy housing with powder coat finish is rated for industrial environments requiring sealed electrical connections. Substitute parts are identified when equivalent mechanical dimensions, thread specifications, ingress protection ratings, and operating temperature ranges align with the original component specifications, enabling direct replacement in assembly applications.

Substiute Parts

701446NP

LAPPIn Stock: 956701446NP Datasheet

Current PartRFQ

09305240441

HARTINGIn Stock: 102309305240441 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LAPP 701446NP is determined by strict alignment of the following critical parameters:

Mechanical Compatibility:

• Connector type must be hood configuration
• Style must be top entry
• Physical dimensions must match: 4.724" L x 1.693" W x 2.992" H (120.00mm x 43.00mm x 76.00mm)
• Lock mechanism must be locking clip on base bottom

Electrical & Environmental Specifications:

• Thread size must be NPT-1
• Operating temperature range must support -40°C ~ 125°C
• Ingress protection rating must be IP65 or higher (IP65, IP66, IP67 acceptable)
• Housing material must be aluminum-based (aluminum alloy or die cast aluminum)
• Housing finish must be powder coated

Regulatory Compliance:

• ECCN classification: EAR99
• HTSUS code: 8538.90.8180

The HARTING 09305240441 meets all substitution criteria through equivalent mechanical form factor, identical thread specification, matching operating temperature range, and superior ingress protection rating (IP65/IP66/IP67).

Parameter Comparison

Engineering Selection Recommendations

Primary Selection: LAPP 701446NP

Use the original LAPP 701446NP when:

• EPIC® HB series compatibility is required by system design specifications
• Supply chain preference favors LAPP components
• Existing inventory or procurement agreements specify LAPP products
• Current stock availability (909 pcs) meets project timeline requirements

Substitute Selection: HARTING 09305240441

The HARTING 09305240441 is a direct mechanical and electrical substitute when:

• Connector hood top entry NPT-1 functionality is the primary requirement
• System design permits cross-manufacturer component substitution
• Enhanced ingress protection (IP65/IP66/IP67 capability) is acceptable or beneficial
• Operating temperature range (-40°C ~ 125°C) meets application requirements
• Identical physical dimensions (120.00mm x 43.00mm x 76.00mm) ensure mechanical fit
• Both components share EAR99 export classification and 8538.90.8180 HTSUS code
• Current stock availability (1006 pcs) supports procurement needs

Both components are active products with equivalent regulatory compliance. The HARTING substitute provides superior ingress protection rating without compromising mechanical or thermal specifications.

Frequently Asked Questions (FAQ)

Q: Can the HARTING 09305240441 replace the LAPP 701446NP in existing assemblies?

A: Yes. Both connectors share identical mechanical dimensions (120.00mm x 43.00mm x 76.00mm), NPT-1 thread size, locking clip configuration, operating temperature range (-40°C ~ 125°C), and powder-coated aluminum housing. The HARTING component provides equivalent or superior performance across all specified parameters.

Q: What is the difference between IP65 and IP65/IP66/IP67 ratings?

A: The LAPP 701446NP is rated IP65 (dust tight, water resistant). The HARTING 09305240441 is rated IP65/IP66/IP67, indicating capability across three protection levels: IP65 (dust tight, water resistant), IP66 (dust tight, water jet resistant), and IP67 (dust tight, temporary immersion resistant). The HARTING component meets or exceeds the original specification.

Q: Are there any compatibility concerns with cross-manufacturer substitution?

A: No compatibility concerns exist for the specified parameters. Both connectors are hood-style top entry connectors with NPT-1 threads, identical dimensions, matching operating temperatures, and equivalent housing materials. Mechanical fit and electrical performance are preserved.

Q: What is the operating temperature range for both connectors?

A: Both the LAPP 701446NP and HARTING 09305240441 operate across -40°C to 125°C, supporting industrial applications across extreme temperature environments.

Q: Are both connectors RoHS compliant?

A: The LAPP 701446NP product status is listed as active. The HARTING 09305240441 is ROHS3 compliant and REACH unaffected. Verify RoHS compliance requirements with your specific application standards.

Q: What is the packaging format for both parts?

A: Both components are supplied in bulk packaging. Current inventory: LAPP 701446NP (909 pcs), HARTING 09305240441 (1006 pcs).

Q: Can these connectors be used interchangeably in the same system?

A: Yes, within the same assembly or system revision. Both connectors meet identical mechanical, thermal, and environmental specifications. Verify that your system design documentation permits cross-manufacturer component substitution before implementation.