Qualtek 701-10/28 AC Power Connector - Equivalent & Substitute Parts

Part Overview

The Qualtek 701-10/28 is an IEC 320-C14 power entry connector receptacle designed for panel-mount applications in commercial AC power distribution systems. This male blade receptacle accommodates 10A at 250VAC and features quick connect termination for 0.110" (2.8mm) terminals. The connector is actively manufactured and maintains full compliance with international safety standards including UL, CSA, and VDE certifications. Substitute parts are identified to address application requirements such as alternative termination methods, enhanced ingress protection, or inventory availability while maintaining electrical and mechanical compatibility.

Substiute Parts

701-10/28

QualtekIn Stock: 736701-10/28 Datasheet

Current PartRFQ

6100.4110

SCHURTER Inc.In Stock: 133736100.4110 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Qualtek 701-10/28 is determined by strict alignment of the following critical parameters:

• Electrical Compatibility: Current rating (10A), voltage rating (250VAC), and number of positions (3) must be identical
• Mechanical Compatibility: Connector style (IEC 320-C14), connector type (receptacle, male blades), and mounting type (panel mount, snap-in) must match
• Physical Fit: Panel cutout dimensions and panel thickness tolerance must accommodate the substitute part
• Safety Compliance: Material flammability rating (UL94 V-0) and filter type (unfiltered - commercial) must be maintained
• Termination Method: Variations in termination (quick connect vs. solder eyelet) are permitted when mechanical and electrical parameters align

The identified substitute part (SCHURTER 6100.4110) meets all critical electrical and mechanical parameters while offering an alternative termination method and enhanced ingress protection rating.

Parameter Comparison

Engineering Selection Recommendations

Both the Qualtek 701-10/28 and SCHURTER 6100.4110 are active products with full compliance to international safety standards. Selection between these parts should be based on termination method requirements and environmental protection needs:

• Qualtek 701-10/28: Select when quick connect termination to 0.110" (2.8mm) terminals is required and direct wire connection capability is prioritized
• SCHURTER 6100.4110: Select when solder eyelet termination is preferred or when IP30 ingress protection is specified for the application

Both parts maintain identical electrical ratings (10A, 250VAC), mechanical mounting characteristics (panel mount, snap-in), and safety certifications (UL94 V-0, CSA/UL/VDE or CCC/cULus/ENEC). Panel cutout dimensions are compatible within standard manufacturing tolerances. Both parts are RoHS3 compliant and REACH unaffected.

Frequently Asked Questions (FAQ)

Q: Can the SCHURTER 6100.4110 be used as a direct replacement for the Qualtek 701-10/28?

A: The SCHURTER 6100.4110 is electrically and mechanically compatible with the Qualtek 701-10/28 for IEC 320-C14 panel-mount applications. The primary difference is termination method: the Qualtek uses quick connect terminals while the SCHURTER uses solder eyelet termination. Panel cutout dimensions are compatible within standard tolerances (27.40mm x 19.80mm vs. 27.50mm x 20.00mm).

Q: What are the key parameters that determine substitution eligibility?

A: Substitution is determined by matching connector style (IEC 320-C14), connector type (receptacle, male blades), current rating (10A), voltage rating (250VAC), number of positions (3), mounting type (panel mount, snap-in), panel thickness (0.039"), and material flammability rating (UL94 V-0). Termination method and ingress protection may vary.

Q: Does the SCHURTER 6100.4110 offer any advantages over the Qualtek 701-10/28?

A: The SCHURTER 6100.4110 provides IP30 ingress protection, which is not specified for the Qualtek 701-10/28. This makes the SCHURTER suitable for applications requiring enhanced environmental protection. Both parts maintain identical electrical and safety compliance ratings.

Q: Are there packaging differences between these parts?

A: The Qualtek 701-10/28 is available in standard packaging, while the SCHURTER 6100.4110 is supplied in bulk packaging. Both are active products with substantial inventory availability.

Q: What certifications apply to both parts?

A: Both parts comply with UL94 V-0 material flammability standards and are RoHS3 compliant. The Qualtek carries CSA, UL, and VDE approvals, while the SCHURTER carries CCC, cULus, and ENEC approvals. Both are REACH unaffected and classified as EAR99 for export purposes.