SCHURTER 7010.7130.89 Equivalent & Substitute Parts

Part Overview

The SCHURTER 7010.7130.89 is a 5 A board mount axial fuse designed for through-hole applications with a fast-blow response characteristic. This component operates across a temperature range of -55°C to 85°C and features a non-standard cartridge form factor with dimensions of 0.093" diameter by 0.315" length (2.36mm x 8.00mm).

The 7010.7130.89 carries an obsolete product status. Identification of functionally equivalent alternatives is necessary to support ongoing system maintenance, repair, and new design implementations where this fuse type is specified.

Substiute Parts

7010.7130.89

SCHURTER Inc.In Stock: 7327010.7130.89 Datasheet

Current PartRFQ

7010.7130.47

SCHURTER Inc.In Stock: 9887010.7130.47 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete SCHURTER 7010.7130.89 is based on strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Current Rating: 5 A
• Fuse Type: Board Mount (Cartridge Style Excluded)
• Mounting Type: Through Hole
• Package / Case: Cartridge, Non-Standard (Axial)
• Response Time: Fast Blow
• Size / Dimension: 0.093" Dia x 0.315" L (2.36mm x 8.00mm)
• Operating Temperature Range: -55°C ~ 85°C
• Manufacturer: SCHURTER Inc.
• Series: 172322

The substitute part SCHURTER 7010.7130.47 satisfies all mandatory matching parameters and remains within the same product series. The primary distinction is the addition of specified voltage ratings (125 V AC / 125 V DC) and active product status, which provides enhanced availability and ongoing manufacturer support.

Parameter Comparison

Engineering Selection Recommendations

The SCHURTER 7010.7130.47 is the direct substitute for the obsolete 7010.7130.89. Both components share identical mechanical and electrical core specifications within the 172322 series.

The 7010.7130.47 provides the following advantages:

Product Status: Active product status ensures continued availability, technical support, and supply chain reliability from SCHURTER Inc.

Compliance & Certifications: The substitute part carries CSA, GAM T1, and UR approvals, along with ROHS3 compliance and REACH unaffected status. These certifications support regulatory requirements in industrial and consumer applications.

Specified Voltage Ratings: The 7010.7130.47 explicitly defines 125 V AC and 125 V DC voltage ratings with documented breaking capacity (50A AC, 300A DC) and melting I²t characteristics (6.2). These parameters enable precise circuit protection design verification.

Inventory Availability: 942 pieces of the 7010.7130.47 are in stock, compared to 722 pieces of the obsolete 7010.7130.89.

Selection of the 7010.7130.47 is appropriate for all applications previously specified with the 7010.7130.89, provided the circuit voltage does not exceed 125 V AC or 125 V DC.

Frequently Asked Questions (FAQ)

Q: Can the SCHURTER 7010.7130.47 directly replace the 7010.7130.89 in existing designs?

A: Yes. Both parts share identical current rating (5 A), response time (fast blow), mounting type (through hole), package form (cartridge, non-standard axial), and physical dimensions (0.093" Dia x 0.315" L). Both operate across -55°C to 85°C. The 7010.7130.47 is the active equivalent within the same 172322 series.

Q: What is the significance of the voltage ratings on the 7010.7130.47?

A: The 7010.7130.47 specifies 125 V AC and 125 V DC ratings with documented breaking capacity and melting I²t values. These parameters define the maximum voltage at which the fuse will operate safely and interrupt fault currents as designed. Applications operating at or below 125 V AC/DC are fully supported by this substitute.

Q: Are there any physical compatibility concerns when substituting the 7010.7130.47 for the 7010.7130.89?

A: No. Both parts are identical in physical dimensions (0.093" diameter by 0.315" length) and use the same through-hole axial cartridge form factor. PCB footprints and mechanical mounting are directly compatible.

Q: What compliance certifications does the substitute part carry?

A: The SCHURTER 7010.7130.47 holds CSA, GAM T1, and UR approvals. It is ROHS3 compliant and REACH unaffected. These certifications support use in regulated industrial, commercial, and consumer applications.

Q: Why is the 7010.7130.89 listed as obsolete?

A: The 7010.7130.89 has been discontinued by SCHURTER Inc. The 7010.7130.47 represents the active product continuation within the same series, offering identical functional performance with enhanced compliance documentation and ongoing manufacturer support.

Q: Can the 7010.7130.47 be used in circuits exceeding 125 V?

A: No. The 7010.7130.47 is rated for maximum 125 V AC and 125 V DC operation. Use in circuits exceeding these voltage ratings is outside the component's specified operating parameters.