SCHURTER 7010.7130.39 Equivalent & Substitute Parts

Part Overview

The SCHURTER 7010.7130.39 is a board mount axial fuse rated for 5 A at 125 V AC/DC with fast blow response characteristics. This component is classified as obsolete, necessitating identification of active equivalent parts for ongoing procurement and design continuity. The part operates within the temperature range of -55°C to 85°C and meets CSA, GAM T1, and UR approval standards.

Substiute Parts

7010.7130.39

SCHURTER Inc.In Stock: 9197010.7130.39 Datasheet

Current PartRFQ

7010.7130.47

SCHURTER Inc.In Stock: 9887010.7130.47 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the SCHURTER 7010.7130.39 is determined by strict equivalence across the following electrical and mechanical parameters:

• Current Rating: 5 A
• Voltage Rating: 125 V AC and 125 V DC
• Response Time: Fast Blow
• Mounting Type: Through Hole
• Package Type: Cartridge, Non-Standard (Axial)
• Breaking Capacity: 50 A AC, 300 A DC
• Melting I²t: 6.2
• Physical Dimensions: 0.093" Dia x 0.315" L (2.36mm x 8.00mm)
• Approval Agencies: CSA, GAM T1, UR

Parts meeting all these criteria are classified as direct equivalents and may be substituted without circuit redesign or board layout modification.

Parameter Comparison

Engineering Selection Recommendations

The SCHURTER 7010.7130.47 is a direct electrical and mechanical equivalent to the 7010.7130.39. Both parts are manufactured by SCHURTER Inc. and share identical electrical ratings, response characteristics, physical dimensions, and regulatory approvals.

The primary distinction is product status: the 7010.7130.39 is obsolete, while the 7010.7130.47 maintains active status. The 7010.7130.47 additionally carries RoHS3 compliance and REACH unaffected status, providing enhanced regulatory alignment for new designs and procurement cycles.

For applications currently using the 7010.7130.39, direct substitution with the 7010.7130.47 is supported without circuit modification, board layout revision, or performance degradation.

Frequently Asked Questions (FAQ)

Q: Can the SCHURTER 7010.7130.47 be used as a direct replacement for the 7010.7130.39?

A: Yes. Both parts are identical in electrical ratings (5 A, 125 V AC/DC), response time (Fast Blow), breaking capacity (50 A AC, 300 A DC), physical dimensions (0.093" Dia x 0.315" L), mounting type (Through Hole), and regulatory approvals (CSA, GAM T1, UR). No circuit or board design changes are required.

Q: What is the primary reason to transition from the 7010.7130.39 to the 7010.7130.47?

A: The 7010.7130.39 is classified as obsolete. The 7010.7130.47 is an active product with identical specifications, ensuring continued availability and supply chain reliability. The 7010.7130.47 also carries RoHS3 compliance and REACH unaffected status.

Q: Are the physical dimensions identical between these two parts?

A: Yes. Both parts measure 0.093" diameter by 0.315" length (2.36mm x 8.00mm) and use the same cartridge, non-standard (axial) package type. Board layout and through-hole positioning remain unchanged.

Q: Do both parts meet the same regulatory and approval standards?

A: Yes. Both the 7010.7130.39 and 7010.7130.47 carry identical approvals from CSA, GAM T1, and UR. The 7010.7130.47 additionally carries RoHS3 compliance and REACH unaffected status.

Q: What is the melting I²t value for both parts?

A: Both parts have a melting I²t of 6.2, indicating identical thermal response and protection characteristics.

Q: Are there any differences in operating temperature range?

A: No. Both parts operate across the identical temperature range of -55°C to 85°C.