SCHURTER 7010.6480.39 Board Mount Fuse Equivalent & Substitute Parts

Part Overview

The SCHURTER 7010.6480.39 is a 12 A, 32 V AC/DC board mount fuse with fast blow response characteristics, designed for through-hole cartridge mounting in non-standard axial configuration. This component is classified as obsolete, necessitating identification of active equivalent alternatives that maintain identical electrical and mechanical specifications for continued system support and procurement.

Substiute Parts

7010.6480.39

SCHURTER Inc.In Stock: 10207010.6480.39 Datasheet

Current PartRFQ

7010.6480.47

SCHURTER Inc.In Stock: 8217010.6480.47 Datasheet

SimilarRFQ

7010.7160.13

SCHURTER Inc.In Stock: 16177010.7160.13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete SCHURTER 7010.6480.39 is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Current Rating: 12 A (exact match required)
• Voltage Rating AC: 32 V (exact match required)
• Voltage Rating DC: 32 V (exact match required)
• Response Time: Fast Blow (exact match required)
• Breaking Capacity @ Rated Voltage: 300 A (exact match required)
• Melting I²t: 57 (exact match required)

Mechanical Parameters:

• Mounting Type: Through Hole (exact match required)
• Fuse Type: Board Mount (Cartridge Style Excluded)
• Package / Case: Cartridge, Non-Standard (Axial) (exact match required)
• Size / Dimension: 0.093" Dia x 0.315" L (2.36mm x 8.00mm) (exact match required)

Environmental Parameters:

• Operating Temperature Range: -55°C ~ 85°C (exact match required)

All identified substitute parts meet these criteria and are classified as active products with current manufacturing status.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: SCHURTER 7010.6480.47

The SCHURTER 7010.6480.47 is the direct substitute for the obsolete 7010.6480.39. Both parts share identical electrical and mechanical specifications, including current rating, voltage ratings, response time, breaking capacity, melting I²t, mounting configuration, and physical dimensions. The 7010.6480.47 is classified as an active product with current manufacturing status. This part carries ROHS3 compliance and REACH Unaffected status, meeting modern regulatory requirements. The approval agency designation (GAM T1) is identical to the main part.

Secondary Equivalent: SCHURTER 7010.7160.13

The SCHURTER 7010.7160.13 provides parametric equivalence across all critical electrical and mechanical parameters. This part is active and carries ROHS3 compliance and REACH Unaffected status. The approval agency designation differs (CSA, UR versus GAM T1), reflecting alternative certification pathways. The 7010.7160.13 is supplied in bulk packaging and belongs to series 172322, compared to series 172321 for the main part. This part is suitable for applications where the alternative certification pathway is acceptable.

Selection between the two active substitutes should be based on approval agency requirements specific to the end application and system certification standards.

Frequently Asked Questions (FAQ)

Q: Can SCHURTER 7010.6480.47 be used as a direct replacement for the obsolete 7010.6480.39?

A: Yes. The 7010.6480.47 maintains identical electrical specifications (12 A, 32 V AC/DC, fast blow response), mechanical configuration (through-hole, cartridge non-standard axial, 0.093" Dia x 0.315" L), and performance characteristics (300 A breaking capacity, 57 melting I²t). Both parts operate across the same temperature range (-55°C ~ 85°C).

Q: What is the difference between 7010.6480.47 and 7010.7160.13?

A: Both parts are parametrically equivalent in electrical and mechanical specifications. The primary differences are: (1) approval agency designation (GAM T1 for 7010.6480.47 versus CSA, UR for 7010.7160.13), (2) series classification (172321 versus 172322), and (3) packaging format (standard versus bulk). Selection depends on certification requirements for the target application.

Q: Are there any physical dimension differences between the substitute parts?

A: No. All three parts share identical physical dimensions: 0.093" Dia x 0.315" L (2.36mm x 8.00mm). Board mount through-hole compatibility is maintained across all substitutes.

Q: Do the substitute parts meet current regulatory compliance standards?

A: Yes. Both SCHURTER 7010.6480.47 and 7010.7160.13 are ROHS3 compliant and REACH Unaffected, meeting current regulatory requirements. The obsolete 7010.6480.39 does not specify these compliance statuses.

Q: What is the melting I²t specification and why is it important for substitution?

A: Melting I²t is a thermal characteristic that defines the fuse's energy absorption capacity before melting. All three parts share an identical melting I²t value of 57, ensuring equivalent thermal response and protection characteristics in the circuit.

Q: Can these fuses be used in both AC and DC applications?

A: Yes. All parts are rated for 32 V AC and 32 V DC operation, permitting use in both alternating and direct current circuits within the specified voltage limits.

Q: What does "fast blow" response time mean?

A: Fast blow indicates the fuse responds quickly to overcurrent conditions, providing rapid circuit protection. All substitute parts maintain this fast blow characteristic, ensuring equivalent protection response timing.