SCHURTER 7010.6370.39 Equivalent & Substitute Parts

Part Overview

The SCHURTER 7010.6370.39 is a board mount axial cartridge fuse rated for 1.5 A at 125 V AC/DC with fast blow response characteristics. This component is classified as obsolete, indicating that the original manufacturer part number is no longer in active production. Identifying equivalent substitute parts ensures design continuity and maintains supply chain reliability for applications requiring this specific fuse specification.

Substiute Parts

7010.6370.39

SCHURTER Inc.In Stock: 9267010.6370.39 Datasheet

Current PartRFQ

7010.6370.47

SCHURTER Inc.In Stock: 10947010.6370.47 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SCHURTER 7010.6370.39 are identified based on electrical and mechanical parameter equivalence. The following criteria determine substitution eligibility:

Electrical Parameters:

• Current Rating: 1.5 A
• Voltage Rating (AC): 125 V
• Voltage Rating (DC): 125 V
• Response Time: Fast Blow
• Breaking Capacity: 300 A @ Rated Voltage
• Melting I²t: 0.52

Mechanical Parameters:

• Mounting Type: Through Hole
• Package Type: Cartridge, Non-Standard (Axial)
• Physical Dimensions: 0.093" Dia × 0.315" L (2.36 mm × 8.00 mm)

Certification Parameters:

• Approval Agency: GAM T1
• Operating Temperature Range: -55°C to 85°C

Parts matching all electrical, mechanical, and certification parameters are classified as direct equivalents and suitable substitutes.

Parameter Comparison

Engineering Selection Recommendations

The SCHURTER 7010.6370.47 is a direct electrical and mechanical equivalent to the obsolete SCHURTER 7010.6370.39. Both parts share identical specifications across all critical parameters: current rating, voltage ratings, response time, breaking capacity, melting I²t, approval agency certification, operating temperature range, and physical dimensions.

The primary distinction between these parts is product status and regulatory compliance. The 7010.6370.39 is classified as obsolete and no longer manufactured. The 7010.6370.47 is an active product with current manufacturing support and carries ROHS3 compliance and REACH unaffected status, indicating alignment with current environmental and regulatory requirements.

For new designs or component replacement in existing applications, the SCHURTER 7010.6370.47 is the appropriate selection, as it provides equivalent electrical and mechanical performance with active product support and current regulatory compliance.

Frequently Asked Questions (FAQ)

Q: Can the SCHURTER 7010.6370.47 be used as a direct replacement for the 7010.6370.39?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters, including current rating, voltage ratings, response time, breaking capacity, and physical dimensions. The 7010.6370.47 is the active equivalent.

Q: What is the difference between these two part numbers?

A: The primary differences are product status and regulatory compliance. The 7010.6370.39 is obsolete, while the 7010.6370.47 is an active product with ROHS3 compliance and REACH unaffected status. All electrical and mechanical specifications are identical.

Q: Are the physical dimensions identical?

A: Yes. Both parts have identical dimensions of 0.093" diameter × 0.315" length (2.36 mm × 8.00 mm), ensuring identical board mount compatibility and through-hole installation requirements.

Q: Do both parts have the same approval certifications?

A: Yes. Both parts carry GAM T1 approval agency certification and operate within the same temperature range of -55°C to 85°C.

Q: What is the breaking capacity of these fuses?

A: Both parts have a breaking capacity of 300 A at rated voltage, indicating their ability to safely interrupt fault currents up to this level.

Q: Are there any compatibility concerns when substituting the 7010.6370.47 for the 7010.6370.39?

A: No compatibility concerns exist. The substitute part matches all electrical, mechanical, and certification parameters of the original part. The through-hole mounting type and axial cartridge package ensure identical PCB integration.