SCHURTER 7010.6360.39 Equivalent & Substitute Parts

Part Overview

The SCHURTER 7010.6360.39 is a board mount axial fuse rated for 1 A at 125 V AC/DC with fast blow response characteristics. This component is classified as obsolete, necessitating identification of active equivalent parts for new designs and ongoing production requirements. The part operates within a temperature range of -55°C to 85°C and features a breaking capacity of 300 A at rated voltage.

Substiute Parts

7010.6360.39

SCHURTER Inc.In Stock: 9007010.6360.39 Datasheet

Current PartRFQ

7010.6360.47

SCHURTER Inc.In Stock: 9097010.6360.47 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the SCHURTER 7010.6360.39 is determined by electrical and mechanical parameter equivalence. The following parameters must remain identical for direct substitution:

• Current Rating: 1 A
• Voltage Rating (AC): 125 V
• Voltage Rating (DC): 125 V
• Response Time: Fast Blow
• Mounting Type: Through Hole
• Package Type: Cartridge, Non-Standard (Axial)
• Breaking Capacity @ Rated Voltage: 300 A
• Melting I²t: 0.39
• Operating Temperature Range: -55°C ~ 85°C
• Physical Dimensions: 0.093" Dia x 0.315" L (2.36mm x 8.00mm)
• Approval Agency: GAM T1

Parts meeting all these criteria are classified as direct electrical and mechanical equivalents.

Parameter Comparison

Engineering Selection Recommendations

The SCHURTER 7010.6360.47 is a direct equivalent substitute for the obsolete SCHURTER 7010.6360.39. Both parts are members of the same 172321 series and share identical electrical and mechanical specifications. The primary distinction is product status: the 7010.6360.39 is obsolete, while the 7010.6360.47 is active and currently in production.

The 7010.6360.47 provides additional compliance certifications including RoHS3 compliance and REACH unaffected status, which may be required for new designs or applications subject to environmental regulations. Both parts carry GAM T1 approval agency certification and are suitable for applications requiring 1 A protection at 125 V AC/DC with fast blow response.

Selection of the 7010.6360.47 is appropriate for new designs, production continuity, and applications where regulatory compliance documentation is required.

Frequently Asked Questions (FAQ)

Q: Can the SCHURTER 7010.6360.47 be used as a direct replacement for the 7010.6360.39?

A: Yes. Both parts are electrically and mechanically identical, with matching current ratings, voltage ratings, response times, physical dimensions, and approval certifications. The 7010.6360.47 is the active production equivalent.

Q: What is the difference between these two part numbers?

A: The primary difference is product status. The 7010.6360.39 is obsolete, while the 7010.6360.47 is active. The 7010.6360.47 additionally carries RoHS3 compliance and REACH unaffected certifications.

Q: Are the physical dimensions identical?

A: Yes. Both parts measure 0.093" diameter by 0.315" length (2.36mm x 8.00mm) and use the same cartridge, non-standard axial package type.

Q: Do both parts have the same breaking capacity?

A: Yes. Both parts have a breaking capacity of 300 A at rated voltage and identical melting I²t values of 0.39.

Q: What is the operating temperature range for these fuses?

A: Both parts operate within the range of -55°C to 85°C.

Q: Are there any inventory considerations?

A: The 7010.6360.39 has 797 pieces in stock, while the 7010.6360.47 has 824 pieces available. However, given the obsolete status of the 7010.6360.39, the 7010.6360.47 is recommended for new procurement.

Q: What approval agencies certify these parts?

A: Both parts carry GAM T1 approval agency certification.