700DP7B10M1REC2RED Equivalent & Substitute Parts

Part Overview

The 700DP7B10M1REC2RED is an active DPDT pushbutton switch manufactured by E-Switch, designed for panel mount rear installation with a red round button actuator. This component operates at 0.4VA across 20V AC/DC ratings with a circular 6.35mm panel cutout. The part is ROHS3 compliant and maintains 50,000 mechanical and electrical life cycles. Substitute parts are identified when equivalent circuit configurations, mounting specifications, and termination styles align with application requirements while accommodating different voltage and current ratings.

Substiute Parts

700DP7B10M1REC2RED

E-SwitchIn Stock: 826700DP7B10M1REC2RED Datasheet

Current PartRFQ

MPA206R

TE Connectivity ALCOSWITCH SwitchesIn Stock: 1263MPA206R Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 700DP7B10M1REC2RED is determined by the following critical parameters:

• Circuit configuration must be DPDT
• Switch function must be On-Mom
• Mounting type must be Panel Mount, Rear
• Termination style must be Solder Lug
• Panel cutout dimensions must be Circular - 6.35mm Dia
• Electrical life must meet or exceed 50,000 cycles
• RoHS3 compliance required

The MPA206R from TE Connectivity ALCOSWITCH Switches satisfies all structural and functional requirements. While the MPA206R provides higher current ratings (6A AC / 4A DC) and voltage ratings (125V AC / 28V DC) compared to the 700DP7B10M1REC2RED (0.4VA / 20V), these enhanced specifications do not prevent substitution in applications requiring the base electrical characteristics. The identical panel cutout dimension (6.35mm circular), matching circuit topology (DPDT), identical switch function (On-Mom), and solder lug termination enable direct mechanical and electrical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the 700DP7B10M1REC2RED and MPA206R maintain active product status with ROHS3 compliance, ensuring regulatory alignment for current applications. The MPA206R provides expanded electrical performance headroom with higher current and voltage ratings while maintaining identical mechanical interface specifications. Selection between these components should be based on application voltage and current requirements within the specified operating ranges. The 700DP7B10M1REC2RED operates within 20V AC/DC at 0.4VA, while the MPA206R accommodates up to 125V AC and 28V DC with 6A/4A capacity. Both components support 50,000 electrical life cycles and identical panel mounting geometry.

Frequently Asked Questions (FAQ)

Q: Can the MPA206R replace the 700DP7B10M1REC2RED in existing designs?

A: Yes, provided the application voltage and current requirements do not exceed the 700DP7B10M1REC2RED ratings (20V AC/DC, 0.4VA). The MPA206R shares identical DPDT circuit configuration, On-Mom switch function, 6.35mm circular panel cutout, and solder lug termination. No PCB or panel modifications are required.

Q: What are the key compatibility factors for substitution?

A: Critical compatibility factors are DPDT circuit topology, On-Mom function, Panel Mount Rear configuration, 6.35mm circular panel cutout, and solder lug termination. Both parts meet these specifications. Voltage and current ratings must be evaluated against application requirements.

Q: Are there packaging differences between these parts?

A: Both components are supplied in bulk packaging. The 700DP7B10M1REC2RED has 802 pieces in stock, while the MPA206R has 1181 pieces available.

Q: Do operating temperature ranges affect substitution decisions?

A: The 700DP7B10M1REC2RED operates across -30°C to 85°C, while the MPA206R operates across -20°C to 80°C. Applications requiring operation below -20°C must use the 700DP7B10M1REC2RED. Applications within -20°C to 80°C support either component.

Q: Are both parts RoHS compliant?

A: Yes, both the 700DP7B10M1REC2RED and MPA206R are ROHS3 compliant with MSL rating of 1 (Unlimited).