LAPP 700862 Heavy Duty Connector Base - Equivalent & Substitute Parts

Part Overview

The LAPP 700862 is a box mount connector base designed for side entry applications with dual PG21 HB16 configuration. This component provides IP65 ingress protection (dust tight, water resistant) and operates across an extended temperature range of -40°C to 125°C. The part is classified as Last Time Buy, indicating discontinued production status. Identification of equivalent substitute parts is necessary to ensure continued availability and system compatibility for new installations and maintenance applications.

Substiute Parts

700862

LAPPIn Stock: 1039700862 Datasheet

Current PartRFQ

70086200

LAPPIn Stock: 82570086200 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for heavy duty connector bases is determined by strict alignment of the following parameters:

Critical Matching Parameters:

• Connector Type (Base - Box Mount)
• Series compatibility (EPIC® family)
• Size designation (HB16)
• Thread size (PG21)
• Ingress Protection rating (IP65 minimum)
• Housing material (Aluminum Alloy)
• Physical dimensions (117.00mm × 58.00mm × 84.00mm)

The substitute part LAPP 70086200 maintains all critical mechanical and electrical parameters required for direct substitution. Both parts share identical connector type, size, thread specification, ingress protection rating, housing material, and physical dimensions. The primary distinction is the change in entry style configuration and product status transition from Last Time Buy to Active production status.

Parameter Comparison

Engineering Selection Recommendations

For Direct Substitution:

LAPP 70086200 serves as the manufacturer-recommended substitute for LAPP 700862. The substitute part maintains all critical mechanical specifications and ingress protection requirements. Selection of the substitute is appropriate for applications where the original Last Time Buy part is no longer available through standard procurement channels.

Temperature Consideration:

The substitute part operates to a maximum of 100°C, compared to the original part's 125°C upper limit. Applications requiring sustained operation above 100°C must retain the original LAPP 700862 specification or identify alternative solutions. For applications with maximum operating temperatures at or below 100°C, the substitute presents no functional limitation.

Entry Configuration:

The original part features dual side entry configuration, while the substitute provides single side entry. Mechanical mounting and cable routing requirements must be evaluated to confirm compatibility with the single entry design.

Availability and Production Status:

The substitute part is in active production status, ensuring long-term availability and supply chain continuity. The original part's Last Time Buy status indicates production discontinuation, making the substitute the recommended path for new designs and ongoing procurement.

Frequently Asked Questions (FAQ)

Q: Can LAPP 70086200 be used as a direct replacement for LAPP 700862 in all applications?

A: LAPP 70086200 is suitable for applications where operating temperatures do not exceed 100°C and where single side entry configuration meets mechanical requirements. Applications requiring dual entry or temperatures above 100°C require alternative solutions.

Q: What is the significance of the Last Time Buy status on LAPP 700862?

A: Last Time Buy status indicates that LAPP has discontinued production of this part. Existing inventory may be available through authorized distributors, but long-term availability is not guaranteed. The substitute part LAPP 70086200 is recommended for new procurement to ensure supply continuity.

Q: Are the physical dimensions identical between the two parts?

A: Yes. Both LAPP 700862 and LAPP 70086200 share identical dimensions of 117.00mm length × 58.00mm width × 84.00mm height, ensuring mechanical compatibility with existing mounting infrastructure.

Q: What is the difference between dual side entry and single side entry configuration?

A: Dual side entry (LAPP 700862) provides two cable entry points on the side of the connector base, while single side entry (LAPP 70086200) provides one cable entry point. The specific application requirements determine which configuration is appropriate.

Q: Are both parts rated for IP65 ingress protection?

A: Yes. Both LAPP 700862 and LAPP 70086200 are rated IP65, providing dust tight and water resistant protection suitable for industrial environments.

Q: What is the operating temperature range difference between these parts?

A: LAPP 700862 operates from -40°C to 125°C, while LAPP 70086200 operates from -40°C to 100°C. The lower temperature limit is identical for both parts. Applications requiring operation above 100°C must use the original specification.