Panasonic 6TPH100MAEA Equivalent & Substitute Parts

Part Overview

The Panasonic 6TPH100MAEA is a 100 µF molded tantalum polymer capacitor rated at 6.3 V in 1206 (3216 Metric) surface mount package. This component is classified as obsolete, making identification of suitable substitute parts essential for ongoing production and maintenance applications. The POSCAP™ TPH series delivers general-purpose energy storage with 100mOhm ESR at 100kHz and operates across -55°C to 85°C with 1000 hours lifetime at 85°C.

Substiute Parts

6TPH100MAEA

Panasonic Electronic ComponentsIn Stock: 122406TPH100MAEA Datasheet

Current PartRFQ

T520A107M006ATE070

KEMETIn Stock: 25463T520A107M006ATE070 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Panasonic 6TPH100MAEA is determined by strict equivalence across the following parameters:

• Capacitance Value: 100 µF (exact match required)
• Voltage Rating: 6.3 V (exact match required)
• Package / Case: 1206 (3216 Metric) (exact match required)
• Type: Molded Tantalum Polymer (exact match required)
• Mounting Type: Surface Mount (exact match required)
• Tolerance: ±20% (exact match required)
• RoHS Compliance: ROHS3 Compliant (required for regulatory alignment)
• MSL Rating: 3 (168 Hours) (required for moisture handling equivalence)

The KEMET T520A107M006ATE070 meets all substitution criteria across these core parameters, establishing direct functional equivalence for the obsolete Panasonic part.

Parameter Comparison

Engineering Selection Recommendations

The KEMET T520A107M006ATE070 is a direct substitute for the obsolete Panasonic 6TPH100MAEA. Both components share identical capacitance, voltage rating, package, type, mounting configuration, tolerance, and moisture sensitivity specifications. Both maintain ROHS3 compliance and equivalent regulatory standing.

The KEMET part offers improved performance characteristics: lower ESR (70mOhm versus 100mOhm at 100kHz), extended operating temperature range (-55°C to 105°C versus -55°C to 85°C), and doubled lifetime rating (2000 hours at 105°C versus 1000 hours at 85°C). The KEMET component carries active product status, ensuring ongoing availability and supply chain continuity.

Physical height differs between the two parts: the Panasonic measures 1.00mm seated height while the KEMET measures 1.80mm. This dimensional variance requires verification against PCB layout constraints and clearance requirements in the target application.

Frequently Asked Questions (FAQ)

Q: Can the KEMET T520A107M006ATE070 directly replace the Panasonic 6TPH100MAEA in existing designs?

A: Yes, the KEMET part meets all core electrical and mechanical substitution criteria: identical 100 µF capacitance, 6.3 V voltage rating, 1206 package, ±20% tolerance, and surface mount configuration. Verify PCB clearance for the increased seated height (1.80mm versus 1.00mm).

Q: What are the key differences between these two parts?

A: The primary differences are product status (Panasonic obsolete, KEMET active), ESR performance (70mOhm versus 100mOhm), operating temperature range (-55°C to 105°C versus -55°C to 85°C), lifetime rating (2000 hours versus 1000 hours), and physical height (1.80mm versus 1.00mm).

Q: Does the lower ESR of the KEMET part affect circuit compatibility?

A: Lower ESR is a performance improvement that does not compromise compatibility. The KEMET part will perform equivalently or better in applications where the Panasonic part was specified.

Q: Are both parts RoHS compliant?

A: Yes, both the Panasonic 6TPH100MAEA and KEMET T520A107M006ATE070 are ROHS3 compliant.

Q: What is the moisture sensitivity level for these capacitors?

A: Both parts carry MSL 3 rating with 168-hour floor life, indicating identical moisture handling requirements and storage conditions.

Q: Is the height difference critical for PCB layout?

A: The 0.80mm height difference (1.00mm to 1.80mm) must be evaluated against available PCB clearance, component stacking, and enclosure constraints in your specific application.