Equivalent & Substitute Parts for 6LS152KCJCA

Part Overview

The 6LS152KCJCA is a 1500 pF ceramic capacitor rated at 2000V (2kV) with Y5P temperature coefficient, manufactured by KYOCERA AVX in a radial, disc configuration. This component is classified as obsolete, making identification of functionally equivalent alternatives necessary for ongoing system support and procurement planning. The part is designed for general-purpose applications requiring high-voltage ceramic capacitance in through-hole mounting configurations.

Substiute Parts

6LS152KCJCA

KYOCERA AVXIn Stock: 6706LS152KCJCA Datasheet

Current PartRFQ

S152K39Y5PP65K5R

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 872S152K39Y5PP65K5R Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 6LS152KCJCA is determined by the following critical parameters:

• Capacitance Value: 1500 pF (exact match required)
• Voltage Rating: 2000V minimum (2kV)
• Temperature Coefficient: Y5P (B) classification
• Tolerance: ±10%
• Mounting Configuration: Through-hole radial, disc package

The substitute part S152K39Y5PP65K5R meets all core electrical specifications. Both parts share identical capacitance, tolerance, voltage rating, and temperature coefficient. The primary differences are in physical dimensions and lead configuration, which are secondary considerations when the electrical performance parameters align.

Parameter Comparison

Engineering Selection Recommendations

The S152K39Y5PP65K5R is the designated manufacturer-recommended substitute for the 6LS152KCJCA. Both parts satisfy identical electrical requirements across capacitance, voltage rating, tolerance, and temperature coefficient specifications. The substitute part carries active product status and ROHS3 compliance certification, providing advantages for long-term procurement and regulatory alignment.

Physical dimension differences exist between the two parts. The substitute features a smaller diameter (10.00mm vs. 13.00mm) but greater seated height (14.00mm vs. 6.00mm) and reduced lead spacing (5.00mm vs. 10.00mm). Lead configuration differs, with the substitute using formed, kinked leads rather than straight leads. These dimensional variations require PCB layout verification to confirm mechanical compatibility within the target application.

The operating temperature range of the substitute extends to -30°C minimum, compared to -40°C for the original part. Applications requiring operation below -30°C must account for this specification difference.

Frequently Asked Questions (FAQ)

Q: Can S152K39Y5PP65K5R be used as a direct replacement for 6LS152KCJCA?

A: Electrical substitution is valid based on matching capacitance (1500 pF), voltage rating (2000V), tolerance (±10%), and temperature coefficient (Y5P). Physical dimensions and lead configuration differ and require PCB layout assessment for mechanical fit.

Q: What are the key differences between these parts?

A: The primary differences are physical dimensions and lead style. The substitute has a smaller diameter but greater height, reduced lead spacing (5.00mm vs. 10.00mm), and kinked formed leads instead of straight leads. Operating temperature minimum is -30°C versus -40°C for the original.

Q: Why is the original part obsolete?

A: The 6LS152KCJCA is classified as obsolete by the manufacturer. The S152K39Y5PP65K5R maintains active product status and provides equivalent electrical performance for ongoing applications.

Q: Are there compliance differences between the parts?

A: The substitute carries ROHS3 compliance certification. Both parts are REACH Unaffected and classified under ECCN EAR99 and HTSUS 8532.23.0060.

Q: What should be verified before implementing the substitute?

A: PCB layout compatibility must be confirmed due to dimensional and lead spacing differences. The reduced lead spacing (5.00mm) and increased seated height (14.00mm) may require circuit board modifications. Applications operating below -30°C should account for the substitute's minimum operating temperature specification.