6ESRFC3 Power Entry Connector Receptacle Equivalent & Substitute Parts

Part Overview

The 6ESRFC3 is an AC power entry connector receptacle manufactured by TE Connectivity Corcom Filters. This component functions as a female socket IEC 320-C14 panel-mount power inlet designed for commercial applications requiring unfiltered power entry. The connector accommodates 15A at 250VAC and features snap-in panel mounting with quick-connect termination. The product maintains Active status with 934 units currently in stock. Substitute parts are identified when inventory constraints, lead time requirements, or application-specific certifications necessitate alternative sourcing options while maintaining electrical and mechanical compatibility.

Substiute Parts

6ESRFC3

TE Connectivity Corcom FiltersIn Stock: 9596ESRFC3 Datasheet

Current PartRFQ

716W-15/15

Qualtek Electronics Corp.In Stock: 2610716W-15/15 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 6ESRFC3 is determined by the following critical parameters:

Electrical Compatibility Requirements:

• Voltage rating must equal or exceed 250VAC
• Current rating must equal or exceed the application requirement
• Connector style must be mechanically and electrically compatible with IEC 320 series specifications
• Number of positions must equal 3

Mechanical Compatibility Requirements:

• Mounting type must be Panel Mount, Snap-In
• Termination must be Quick Connect - 0.250" (6.3mm)
• Panel cutout dimensions must accommodate the connector footprint
• Panel thickness tolerance must support secure installation

Regulatory and Compliance Requirements:

• RoHS3 compliance required
• Approval agencies must include recognized standards bodies (CSA, UL, VDE, or equivalent)

The substitute part 716W-15/15 from Qualtek Electronics Corp. meets these criteria with the following considerations: it maintains 250VAC voltage rating, operates at 10A (lower than the 15A primary specification), features identical mounting and termination specifications, and holds equivalent regulatory approvals including CSA and UL certification.

Parameter Comparison

Engineering Selection Recommendations

Primary Part Selection (6ESRFC3): The 6ESRFC3 is the specified component for applications requiring 15A capacity at 250VAC with IEC 320-C14 connector configuration. This part maintains Active product status with established inventory availability. Regulatory approvals include CSA, UL, and VDE certification, supporting deployment in North American and European markets. ROHS3 compliance satisfies environmental regulatory requirements.

Substitute Part Selection (716W-15/15): The 716W-15/15 serves as an alternative when primary part availability is constrained. This substitute maintains electrical compatibility at 250VAC and mechanical compatibility through identical mounting and termination specifications. The current rating of 10A represents a derated specification relative to the primary part's 15A rating; applications must operate within this lower current envelope. Regulatory approvals include CSA and UL certification, with additional CCC and TUV approvals. ROHS3 compliance is maintained. Panel cutout dimensions differ slightly (32.60mm x 25.30mm versus 32.26mm x 24.76mm); panel tolerance analysis is required to confirm mechanical fit. Panel thickness specification differs (0.059" versus 0.102"), indicating potential variation in snap-in retention characteristics.

Selection Criteria:

• Use 6ESRFC3 for applications requiring full 15A capacity
• Use 716W-15/15 only when application current demand does not exceed 10A and panel thickness accommodates the substitute specification
• Verify panel cutout tolerance compatibility before substitution
• Confirm regulatory approval requirements align with available certifications

Frequently Asked Questions (FAQ)

Q: Can the 716W-15/15 directly replace the 6ESRFC3 in all applications?

A: No. The 716W-15/15 operates at a maximum current rating of 10A, compared to the 6ESRFC3's 15A rating. Substitution is valid only for applications where the actual current demand does not exceed 10A. Additionally, panel thickness specifications differ (0.059" versus 0.102"), requiring verification that the panel installation environment accommodates the substitute connector's snap-in mechanism.

Q: Are the connector styles electrically compatible?

A: The 6ESRFC3 uses IEC 320-C14 connector style, while the 716W-15/15 uses IEC 320-2-2/F connector style. Both are IEC 320 series receptacles with 3 positions, 250VAC rating, and female socket configuration. Mechanical and electrical compatibility exists within the IEC 320 standard framework for these specific configurations.

Q: What regulatory approvals apply to each part?

A: The 6ESRFC3 holds CSA, UL, and VDE approvals. The 716W-15/15 holds CCC, CSA, TUV, and UL approvals. Both parts share CSA and UL certification. Applications requiring VDE compliance must use the 6ESRFC3. Applications requiring CCC or TUV certification can use the 716W-15/15.

Q: Do both parts meet RoHS requirements?

A: Yes. Both the 6ESRFC3 and 716W-15/15 are ROHS3 compliant, satisfying environmental regulatory requirements for restricted substance limitations.

Q: What is the significance of the panel cutout dimension difference?

A: The 6ESRFC3 specifies 32.26mm x 24.76mm panel cutout, while the 716W-15/15 specifies 32.60mm x 25.30mm. The substitute part has slightly larger dimensions. Panel tolerance analysis is required to confirm that existing panel cutouts accommodate the substitute connector. Panels designed specifically for the 6ESRFC3 may require modification or re-evaluation for the 716W-15/15.

Q: What does the panel thickness specification indicate?

A: Panel thickness specification indicates the maximum panel thickness that the snap-in mounting mechanism accommodates. The 6ESRFC3 supports panels up to 0.102" (2.60mm) thick, while the 716W-15/15 supports panels up to 0.059" (1.50mm) thick. The substitute part has a lower thickness tolerance, indicating it is designed for thinner panel installations. Panels thicker than 0.059" may not secure the 716W-15/15 properly.

Q: Can I use the 716W-15/15 in a 15A application?

A: No. The 716W-15/15 is rated for a maximum of 10A. Operating this connector at 15A exceeds its current rating and violates electrical safety specifications. Use only the 6ESRFC3 for applications requiring 15A capacity.

Q: Are both parts available in the same packaging?

A: Yes. Both the 6ESRFC3 and 716W-15/15 are supplied in Bulk packaging. The 6ESRFC3 has 934 units in stock, while the 716W-15/15 has 2560 units in stock.