6EL4CM Power Entry Connector Module - Equivalent & Substitute Parts

Part Overview

The 6EL4CM is a power entry connector receptacle module manufactured by TE Connectivity Corcom Filters, designed for IEC 320-C14 panel mount applications. This component functions as a filtered AC power inlet with integrated fuse holder and voltage selector capabilities. The 6EL4CM carries an obsolete product status, making identification of active equivalent parts essential for ongoing procurement and system maintenance. Substitute parts must maintain functional compatibility with the IEC 320-C14 connector standard while accommodating the electrical and mechanical specifications of the original design.

Substiute Parts

6EL4CM

TE Connectivity Corcom FiltersIn Stock: 10866EL4CM Datasheet

Current PartRFQ

7-6609962-3

TE Connectivity Corcom FiltersIn Stock: 10637-6609962-3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 6EL4CM is determined by strict adherence to the following electrical and mechanical parameters:

Primary Compatibility Criteria:

• Connector style must be IEC 320-C14
• Connector type must be Receptacle, Male Blades - Module
• Mounting configuration must be Panel Mount, Snap-In
• Filter type must be Filtered (EMI, RFI) - Commercial
• Fuse holder configuration must be Twin Fused
• Number of positions must be 3

Secondary Compatibility Considerations:

• Current rating at appliance inlet must equal or exceed 6A
• Voltage rating must support 120/250VAC operation or equivalent
• Termination style must be Quick Connect format
• Panel thickness accommodation must overlap with original specification range

The substitute part 7-6609962-3 meets the primary compatibility criteria as an IEC 320-C14 receptacle module with panel mount snap-in configuration and twin fused holder. However, differences exist in current rating, voltage specification, termination connector size, and panel thickness range, which must be evaluated for specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

The 7-6609962-3 serves as an active substitute for the obsolete 6EL4CM based on the following engineering criteria:

Functional Compatibility: Both components share identical IEC 320-C14 connector geometry, receptacle male blade configuration, and panel mount snap-in installation method. The three-position connector layout and twin fused holder design are preserved in the substitute part.

Electrical Characteristics: The substitute part provides a higher current rating (10A versus 6A) at the appliance inlet, which is compatible with applications designed for the original 6A specification. The voltage rating difference (120VAC for substitute versus 120/250VAC for original) represents a narrower operational range in the substitute part and must be evaluated against specific application voltage requirements.

Compliance and Certification: The 7-6609962-3 holds active product status with ROHS3 compliance and certifications from CSA, UL, and VDE approval agencies. The original 6EL4CM carries RoHS Compliant status without specified approval agencies. The substitute part's enhanced certification profile supports modern regulatory requirements.

Mechanical Considerations: The substitute part accommodates panel thicknesses from 0.031" to 0.114" (0.79mm to 2.90mm), which overlaps substantially with the original specification range of 0.031" to 0.126" (0.79mm to 3.20mm). Applications requiring panel thicknesses exceeding 2.90mm cannot use the substitute part.

Termination Interface: The substitute part uses 0.187" (4.7mm) quick connect terminals compared to the original 0.110" (2.8mm) terminals. This difference requires evaluation of mating connector compatibility in the target application.

Frequently Asked Questions (FAQ)

Q: Can the 7-6609962-3 directly replace the 6EL4CM in all applications?

A: Direct replacement depends on three specific factors: (1) the application voltage requirement must operate within 120VAC specification, (2) the panel thickness must not exceed 2.90mm, and (3) the internal wiring must accommodate the larger 0.187" (4.7mm) quick connect terminals. If all three conditions are met, the substitute part is functionally compatible.

Q: What is the significance of the current rating difference between 6A and 10A?

A: The substitute part's 10A rating exceeds the original 6A specification. Applications designed for 6A operation remain within the safe operating range of the 10A-rated substitute. The higher rating does not create incompatibility; it provides additional capacity margin.

Q: Does the voltage rating difference affect substitution feasibility?

A: The original 6EL4CM supports both 120VAC and 250VAC operation. The substitute 7-6609962-3 supports 120VAC only. Applications operating exclusively at 120VAC can use the substitute without restriction. Applications requiring 250VAC operation cannot use the substitute part.

Q: Are the termination connector sizes interchangeable?

A: No. The original 6EL4CM uses 0.110" (2.8mm) quick connect terminals, while the substitute 7-6609962-3 uses 0.187" (4.7mm) terminals. The mating connectors in the application must be compatible with the substitute part's terminal size. Mismatched terminal sizes result in improper electrical connection.

Q: What is the impact of the panel thickness range difference?

A: The original part accommodates panels up to 0.126" (3.20mm) thick. The substitute part accommodates panels up to 0.114" (2.90mm) thick. Applications with panel thicknesses between 2.90mm and 3.20mm cannot use the substitute part due to mechanical interference.

Q: Why does the substitute part have additional approval certifications?

A: The 7-6609962-3 carries CSA, UL, and VDE certifications, while the original 6EL4CM does not list specific approval agencies. These certifications indicate compliance with regional safety and electromagnetic compatibility standards. The substitute part's enhanced certification profile supports deployment in markets requiring these specific approvals.

Q: Is the ROHS3 compliance of the substitute part compatible with RoHS Compliant applications?

A: Yes. ROHS3 represents an updated version of the RoHS standard with expanded scope. Components meeting ROHS3 compliance also satisfy RoHS Compliant requirements. The substitute part's ROHS3 status is compatible with applications designed for RoHS Compliant components.