TE Connectivity Corcom Filters 6EC4 Equivalent & Substitute Parts

Part Overview

The TE Connectivity Corcom Filters 6EC4 is an AC power entry connector receptacle designed for IEC 320-C14 panel mount applications. This filtered power entry module integrates EMI and RFI filtering for commercial applications, providing 6A current capacity at 120/250VAC. The component features a male blade connector configuration with wire lead termination and right-angle mounting orientation. As an active product with full regulatory compliance, the 6EC4 serves as the primary reference for identifying functionally equivalent alternatives in filtered power entry connector applications.

Substiute Parts

6EC4

TE Connectivity Corcom FiltersIn Stock: 8936EC4 Datasheet

Current PartRFQ

FN9226-6-06

Schaffner EMC Inc.In Stock: 1297FN9226-6-06 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 6EC4 is determined by strict alignment with the following critical parameters:

Mandatory Matching Parameters:

• Connector Style: IEC 320-C14
• Connector Type: Receptacle, Male Blades
• Number of Positions: 3
• Filter Type: Filtered (EMI, RFI) - Commercial
• Current Rating - Filter: 6A
• Mounting Type: Panel Mount, Flange, Right Angle
• Accommodates a Fuse: No

Regulatory Compliance:

• RoHS3 Compliant status
• Approval by recognized agencies (CSA, UL, VDE, or equivalent)

The Schaffner EMC Inc. FN9226-6-06 qualifies as a substitute part based on matching all mandatory parameters. Differences in termination method (Quick Connect versus Wire Leads), panel cutout dimensions, and material flammability rating do not disqualify substitution when mechanical and electrical integration requirements are satisfied.

Parameter Comparison

Engineering Selection Recommendations

Both the TE Connectivity 6EC4 and Schaffner FN9226-6-06 are active products with full ROHS3 compliance and recognized regulatory approvals. Selection between these components depends on application-specific requirements:

TE Connectivity 6EC4 Selection Criteria:

• Applications requiring wire lead termination for direct soldering or crimping
• Panel designs with rectangular cutout dimensions of 30.48mm x 22.86mm
• Systems requiring VDE certification in addition to CSA and UL approvals

Schaffner FN9226-6-06 Selection Criteria:

• Applications utilizing quick connect termination (0.250" / 6.3mm) for rapid assembly
• Panel designs accommodating rectangular cutout dimensions of 34.40mm x 22.60mm
• Systems requiring ENEC or SEMKO certification alongside CSA and UL approvals
• Applications benefiting from UL94 V-2 material flammability rating
• Designs requiring IP40 ingress protection

Both components deliver identical electrical performance at 6A filtered current capacity with IEC 320-C14 male blade receptacle configuration and commercial-grade EMI/RFI filtering.

Frequently Asked Questions (FAQ)

Q: Can the Schaffner FN9226-6-06 directly replace the TE Connectivity 6EC4 in existing designs?

A: Direct replacement requires evaluation of two factors: termination compatibility and panel cutout dimensions. The FN9226-6-06 uses quick connect termination (0.250" / 6.3mm) versus wire leads on the 6EC4, and panel cutout dimensions differ (34.40mm x 22.60mm versus 30.48mm x 22.86mm). Electrical and filtering performance are equivalent.

Q: Are there voltage or current rating differences between these parts?

A: Both components operate at 6A filtered current capacity. The 6EC4 specifies 120/250VAC appliance inlet rating. The FN9226-6-06 does not specify appliance inlet voltage in the provided data. Confirm voltage compatibility with the Schaffner component datasheet for your application.

Q: What is the significance of the different panel cutout dimensions?

A: Panel cutout dimensions determine mechanical fit in existing enclosure designs. The 6EC4 requires a 30.48mm x 22.86mm rectangular opening, while the FN9226-6-06 requires 34.40mm x 22.60mm. Existing panel tooling may not accommodate the substitute without modification.

Q: Do both parts meet the same regulatory standards?

A: Both components are ROHS3 compliant and carry CSA and UL approvals. The 6EC4 includes VDE certification, while the FN9226-6-06 includes ENEC and SEMKO certifications. Confirm that your application requirements align with the specific approval agencies listed for each component.

Q: What is the difference between wire lead and quick connect termination?

A: Wire lead termination (6EC4) requires soldering or crimping connections to the component leads. Quick connect termination (FN9226-6-06) uses 0.250" (6.3mm) spade connectors for tool-free assembly and disassembly. Selection depends on assembly process and serviceability requirements.

Q: Are there packaging differences that affect procurement?

A: The 6EC4 is supplied in bulk packaging with 857 pieces in stock. The FN9226-6-06 is supplied in tray packaging with 1229 pieces in stock. Packaging format may influence handling, storage, and assembly line integration.