Equivalent & Substitute Parts for 6A1 General Purpose Rectifier Diode

Part Overview

The 6A1 is a general purpose rectifier diode manufactured by Micro Commercial Co, rated for 100V DC reverse voltage and 6A average rectified current in an R-6 axial through-hole package. This component is classified as obsolete, which necessitates identification of equivalent and substitute parts for ongoing applications. The 6A1 operates across a junction temperature range of -55°C to 125°C and exhibits standard recovery characteristics with a forward voltage of 950 mV at 6A.

Key Parameters

Parameter	Value	Unit
Voltage - DC Reverse (Vr) (Max)	100	V
Current - Average Rectified (Io)	6	A
Voltage - Forward (Vf) (Max) @ If	950 mV @ 6 A	mV @ A
Speed	Standard Recovery >500ns, > 200mA (Io)	-
Current - Reverse Leakage @ Vr	10	µA @ 100 V
Mounting Type	Through Hole	-
Package / Case	R-6, Axial	-
Operating Temperature - Junction	-55 to 125	°C
RoHS Status	RoHS non-compliant	-

Substitute Part Grouping Explanation

Substitute parts for the 6A1 are categorized based on electrical and mechanical compatibility within the rectifier diode category. The primary substitution criteria are:

Critical Parameters for Substitution:

Voltage - DC Reverse (Vr) (Max): 100V minimum
Current - Average Rectified (Io): 6A minimum
Mounting Type: Through Hole
Package compatibility: R-6 or equivalent axial package

Substitution Categories:

Direct Substitutes (Identical Electrical and Mechanical Specifications): Parts that maintain the same voltage rating, current rating, package type, and mounting configuration. These include the 6A1-TP from Micro Commercial Co and the 6A01-G and 6A01B-G from Comchip Technology.

Similar Substitutes (Equivalent Electrical Performance, Different Package or Manufacturer): Parts that meet or exceed the voltage and current requirements but may differ in package designation, forward voltage characteristics, or recovery speed. These include the GI751-E3/54 from Vishay and the 1N5809 from Microchip Technology, which operate at reduced current ratings.

Upgrade Parts (Enhanced Specifications or Compliance): Parts that exceed the original specifications in voltage, current, or compliance status. The 6A1-TP represents an upgrade path with ROHS3 compliance compared to the RoHS non-compliant original 6A1.

Parameter Comparison

Part Number	Manufacturer	Vr (Max) [V]	Io [A]	Vf (Max) @ If [mV @ A]	Speed	Package	Mounting	Tj Range [°C]	RoHS Status	Product Status
6A1	Micro Commercial Co	100	6	950 @ 6	Standard >500ns	R-6, Axial	Through Hole	-55 to 125	Non-compliant	Obsolete
6A1-TP	Micro Commercial Co	100	6	950 @ 6	Standard >500ns	R-6, Axial	Through Hole	-55 to 125	ROHS3 Compliant	Not For New Designs
6A01-G	Comchip Technology	100	6	1000 @ 6	Standard >500ns	R-6, Axial	Through Hole	-55 to 125	ROHS3 Compliant	Active
6A01B-G	Comchip Technology	100	6	1000 @ 6	Standard >500ns	R-6, Axial	Through Hole	-55 to 125	ROHS3 Compliant	Active
GI751-E3/54	Vishay General Semiconductor	100	6	900 @ 6	Standard >500ns	P600, Axial	Through Hole	-50 to 150	ROHS3 Compliant	Active
1N5809	Microchip Technology	100	3	875 @ 4	Fast ≤500ns	B, Axial	Through Hole	-65 to 175	Non-compliant	Active
1N6077	Microchip Technology	100	1.3	1760 @ 18.8	Fast ≤500ns	A, Axial	Through Hole	-65 to 155	Non-compliant	Active

Engineering Selection Recommendations

For Direct Replacement with Identical Specifications:

The 6A1-TP from Micro Commercial Co provides the most direct substitution path. It maintains identical electrical parameters (100V, 6A, 950 mV forward voltage) and package configuration (R-6 axial through-hole). The primary advantage is ROHS3 compliance, addressing regulatory requirements for new manufacturing. However, the 6A1-TP is classified as "Not For New Designs," indicating it is also in transition.

For Active Production Applications:

The 6A01-G and 6A01B-G from Comchip Technology are recommended as primary substitutes. Both parts meet the 100V/6A specification with R-6 axial through-hole packaging and ROHS3 compliance. The 6A01-G is supplied in cut tape packaging, while 6A01B-G is supplied in bulk. Forward voltage is specified at 1000 mV @ 6A, representing a 50 mV increase compared to the original 6A1, which remains within acceptable tolerance for general purpose rectification applications.

For Enhanced Temperature Range Requirements:

The GI751-E3/54 from Vishay General Semiconductor extends the operating temperature range to -50°C to 150°C (compared to -55°C to 125°C for the 6A1) and offers superior forward voltage characteristics at 900 mV @ 6A. The package designation changes from R-6 to P600, both axial through-hole configurations. This part is ROHS3 compliant and actively produced.

For Current-Limited Applications:

The 1N5809 from Microchip Technology is suitable only for applications requiring 3A or less average rectified current. It provides a 100V rating with fast recovery characteristics and an extended temperature range of -65°C to 175°C. This part is not recommended as a direct substitute for 6A applications due to current derating.

Compliance Considerations:

Applications requiring RoHS compliance must transition from the original 6A1 (RoHS non-compliant) to one of the ROHS3-compliant alternatives: 6A1-TP, 6A01-G, 6A01B-G, or GI751-E3/54. The 1N5809 and 1N6077 remain RoHS non-compliant and are not suitable for new designs subject to RoHS regulations.

Frequently Asked Questions (FAQ)

Q: Can the 6A1-TP be used as a direct replacement for the 6A1?

A: Yes. The 6A1-TP maintains identical electrical specifications (100V, 6A, 950 mV forward voltage) and R-6 axial through-hole packaging. The primary difference is ROHS3 compliance. However, both parts are classified as obsolete or not for new designs, indicating limited long-term availability.

Q: What is the difference between 6A01-G and 6A01B-G?

A: Both parts are electrically identical with 100V, 6A ratings and R-6 axial through-hole packaging. The difference is packaging format: 6A01-G is supplied in cut tape (CT), while 6A01B-G is supplied in bulk. Selection depends on procurement and assembly requirements.

Q: Can the 1N5809 replace the 6A1 in a 6A application?

A: No. The 1N5809 is rated for 3A average rectified current, which is insufficient for applications requiring 6A. Using the 1N5809 in a 6A circuit would result in component failure or reduced reliability.

Q: Why does the GI751-E3/54 have a different package designation (P600 vs. R-6)?

A: Both P600 and R-6 are axial through-hole package designations used by different manufacturers for similar form factors. The GI751-E3/54 maintains mechanical compatibility with through-hole PCB layouts designed for the 6A1, though the physical dimensions may vary slightly. Verification of PCB footprint compatibility is required.

Q: Is the forward voltage difference between 6A1 (950 mV) and 6A01-G (1000 mV) significant?

A: The 50 mV difference represents approximately 5% variation and is within normal tolerance for general purpose rectifier applications. This difference does not affect functional compatibility in standard power supply and rectification circuits.

Q: Which substitute part has the best long-term availability?

A: The 6A01-G and 6A01B-G from Comchip Technology are classified as active products with current production status, indicating superior long-term availability compared to the obsolete 6A1 or the "Not For New Designs" 6A1-TP.

Q: Are all substitute parts RoHS compliant?

A: No. The 1N5809 and 1N6077 from Microchip Technology remain RoHS non-compliant. For applications requiring RoHS compliance, select from 6A1-TP, 6A01-G, 6A01B-G, or GI751-E3/54.

Q: Can the 6A1 be used in applications with operating temperatures above 125°C?

A: No. The 6A1 is rated for a maximum junction temperature of 125°C. For applications requiring extended temperature ranges, the GI751-E3/54 (rated to 150°C) or 1N5809 (rated to 175°C) provide higher temperature capability, subject to current rating requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message