Amphenol ICC 69192-630 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 69192-630 is a vertical through-hole rectangular connector header with 30 positions arranged in 2 rows at 0.100" (2.54mm) pitch. This BERGSTIK® II series connector is designed for board-to-board applications with kinked pin solder termination and push-pull fastening. The part is active and currently in stock with 662 units available. Equivalent and substitute parts are identified based on matching core electrical and mechanical parameters: 30-position configuration, 2-row layout, 0.100" pitch, through-hole mounting, and push-pull fastening. Substitutes accommodate variations in contact length, insulation material, and finish specifications within acceptable tolerance ranges for this connector category.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Number of Positions	30
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Termination	Solder
Fastening Type	Push-Pull
Contact Shape	Square
Material Flammability Rating	UL94 V-0
Insulation Color	Black
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict adherence to the following core parameters:

Primary Matching Criteria (Non-Negotiable):

30-position connector configuration
2-row layout with 0.100" (2.54mm) row spacing
0.100" (2.54mm) mating pitch
Male pin contact type
Through-hole mounting
Push-pull fastening mechanism
Square contact shape
UL94 V-0 flammability rating
Black insulation color

Secondary Variation Parameters (Allowed Within Substitution):

Contact length (mating and post dimensions) within ±0.010" tolerance
Contact finish material (gold, tin, or combinations)
Contact finish thickness variations
Insulation material (Liquid Crystal Polymer, Polybutylene Terephthalate, or equivalent)
Contact material (Phosphor Bronze or Copper Alloy)
Operating temperature range (provided minimum is maintained)
RoHS compliance status (both compliant and non-compliant parts listed)

All substitute parts listed maintain the core 30-position, 2-row, 0.100" pitch architecture required for direct functional equivalence.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Series	Connector Type	Positions	Rows	Pitch (mm)	Contact Length - Mating (in)	Contact Length - Post (in)	Overall Length (in)	Insulation Height (in)	Contact Finish - Mating	Contact Material	Insulation Material	Operating Temp (°C)	RoHS Status	Inventory
69192-630	Amphenol ICC (FCI)	BERGSTIK® II	Header	30	2	2.54	0.230	0.120	0.450	0.100	Gold or Gold, GXT™	Phosphor Bronze	—	—	Non-compliant	662
0010897302	Molex	C-Grid 70280	Header, Breakaway	30	2	2.54	0.240	0.107	0.437	0.090	Gold	Copper Alloy	LCP, Glass Filled	—	ROHS3 Compliant	1551
6-146257-5	TE Connectivity AMP Connectors	AMPMODU Mod II	Header, Breakaway	30	2	2.54	0.230	0.120	0.440	0.090	Gold	Copper Alloy	LCP	-65 to 105	RoHS Compliant	2684
PBC15DAAN	Sullins Connector Solutions	—	Header, Breakaway	30	2	2.54	0.230	0.120	0.450	0.100	Gold	Phosphor Bronze	PBT	-65 to 125	ROHS3 Compliant	1856
PBC15DADN	Sullins Connector Solutions	—	Header, Breakaway	30	2	2.54	0.230	0.420	0.750	0.100	Gold	Phosphor Bronze	PBT	-65 to 125	ROHS3 Compliant	831
PEC15DAAN	Sullins Connector Solutions	—	Header, Breakaway	30	2	2.54	0.230	0.120	0.450	0.100	Tin	Phosphor Bronze	PBT	-65 to 125	ROHS3 Compliant	1136
TSW-115-07-G-D	Samtec Inc.	TSW	Header	30	2	2.54	0.230	0.100	0.430	0.100	Gold	Phosphor Bronze	PBT	-55 to 125	ROHS3 Compliant	1639
TSW-115-07-L-D	Samtec Inc.	TSW	Header	30	2	2.54	0.230	0.100	0.430	0.100	Gold	Phosphor Bronze	PBT	-55 to 125	ROHS3 Compliant	876
TSW-115-07-S-D	Samtec Inc.	TSW	Header	30	2	2.54	0.230	0.100	0.430	0.100	Gold	Phosphor Bronze	PBT	-55 to 125	ROHS3 Compliant	744
TSW-115-07-T-D	Samtec Inc.	TSW	Header	30	2	2.54	0.230	0.100	0.430	0.100	Tin	Phosphor Bronze	PBT	-55 to 105	ROHS3 Compliant	2300
TSW-115-08-G-D	Samtec Inc.	TSW	Header	30	2	2.54	0.230	0.200	0.530	0.100	Gold	Phosphor Bronze	PBT	-55 to 125	ROHS3 Compliant	771

Engineering Selection Recommendations

Direct Functional Equivalents (Identical Mating and Post Dimensions):

The 69192-630 shares identical contact length specifications (0.230" mating, 0.120" post) with PBC15DAAN and PEC15DAAN from Sullins Connector Solutions, and TSW-115-07-G-D, TSW-115-07-L-D, and TSW-115-07-S-D from Samtec Inc. These parts maintain the same overall contact length of 0.450" and insulation height of 0.100", ensuring mechanical and electrical compatibility without PCB redesign.

Near-Equivalent Substitutes (Minor Dimensional Variance):

The 6-146257-5 from TE Connectivity AMP Connectors presents a 0.010" reduction in insulation height (0.090" vs. 0.100") and overall contact length (0.440" vs. 0.450"), within standard tolerance ranges for this connector class. The 0010897302 from Molex exhibits similar dimensional variance with 0.090" insulation height and 0.437" overall length.

Extended Post Length Variant:

The PBC15DADN from Sullins Connector Solutions features an extended post length of 0.420" (vs. 0.120" standard), resulting in 0.750" overall contact length. This variant is suitable only for applications requiring deeper PCB penetration or specific board thickness accommodations.

Compliance Considerations:

The original 69192-630 is RoHS non-compliant. All substitute parts except the 69192-630 itself carry ROHS3 compliance certification. Selection should account for regulatory requirements in target markets and end-use applications.

Contact Finish Variations:

Gold-finished mating surfaces are standard across most substitutes. The PEC15DAAN and TSW-115-07-T-D feature tin mating finishes, suitable for applications where gold plating is not required or where cost optimization is prioritized.

Frequently Asked Questions (FAQ)

Q: Can I substitute the 69192-630 with any of these parts without PCB modification?

A: Direct substitution without PCB modification is possible with PBC15DAAN, PEC15DAAN, TSW-115-07-G-D, TSW-115-07-L-D, and TSW-115-07-S-D. These maintain identical mating pitch (0.100"), row spacing (0.100"), contact lengths, and insulation height. The 6-146257-5 and 0010897302 have reduced insulation height (0.090" vs. 0.100") and may require board layout verification. The PBC15DADN has extended post length and is suitable only for specific applications requiring deeper penetration.

Q: What is the difference between gold and tin contact finishes?

A: Gold finishes (69192-630, most substitutes) provide superior corrosion resistance and lower contact resistance, suitable for high-reliability applications. Tin finishes (PEC15DAAN, TSW-115-07-T-D) offer cost advantages and adequate performance for general-purpose applications with standard environmental conditions. Both finishes are compatible with standard solder reflow processes.

Q: Are all substitute parts RoHS compliant?

A: No. The original 69192-630 is RoHS non-compliant. All listed substitutes (0010897302, 6-146257-5, PBC15DAAN, PBC15DADN, PEC15DAAN, TSW-115-07-G-D, TSW-115-07-L-D, TSW-115-07-S-D, TSW-115-08-G-D) carry ROHS3 compliance certification. Selection depends on regulatory requirements for your application and target markets.

Q: What is the significance of the TSW-115-08-G-D having a 0.200" post length?

A: The TSW-115-08-G-D is designed for applications requiring extended post length (0.200" vs. standard 0.100"), resulting in 0.530" overall contact length. This variant accommodates thicker PCBs or specific board stackup configurations. It is not a direct substitute for standard 0.120" post applications without board redesign.

Q: Can I mix different substitute parts in the same assembly?

A: All listed substitutes maintain the same 30-position, 2-row, 0.100" pitch configuration and are mechanically compatible within a single connector footprint. However, mixing different manufacturers or contact finish types in the same assembly may introduce inconsistent contact resistance and reliability characteristics. Standardization on a single part number per assembly is recommended for production consistency.

Q: What is the operating temperature range consideration for substitute selection?

A: The 69192-630 does not specify an operating temperature range. Substitutes range from -55°C to 125°C (Samtec TSW series) to -65°C to 125°C (Sullins PBC/PEC series). For applications with defined temperature requirements, select substitutes with operating ranges that encompass your specification. The TE Connectivity 6-146257-5 operates to 105°C maximum, suitable for standard industrial applications.

Q: Are there inventory considerations for substitute selection?

A: Current inventory levels vary significantly. The TE Connectivity 6-146257-5 has the highest availability (2684 units), followed by the Samtec TSW-115-07-T-D (2300 units). The Sullins PBC15DADN has the lowest availability (831 units). For high-volume production, verify lead times and stock levels with your supplier before finalizing part selection.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message