Amphenol ICC 69192-626 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 69192-626 is a vertical through-hole rectangular connector header with 26 positions arranged in 2 rows at 0.100" (2.54mm) pitch. This BERGSTIK® II series connector is designed for board-to-board applications with kinked pin solder termination and push-pull fastening. The part is currently active in production with 689 units in stock. Equivalent and substitute parts are identified based on matching core electrical and mechanical parameters: 26-position configuration, 2.54mm pitch, through-hole mounting, square contact geometry, and UL94 V-0 flammability rating.

Key Parameters

Parameter	69192-626 Specification
Connector Type	Header
Contact Type	Male Pin
Number of Positions	26
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Termination	Kinked Pin, Solder
Fastening Type	Push-Pull
Contact Shape	Square
Contact Material	Phosphor Bronze
Contact Finish - Mating	Gold or Gold, GXT™
Contact Finish Thickness - Mating	30.0µin (0.76µm)
Insulation Height	0.100" (2.54mm)
Overall Contact Length	0.450" (11.43mm)
Material Flammability Rating	UL94 V-0
Insulation Color	Black
RoHS Status	RoHS non-compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the 69192-626 are qualified based on the following core parameters that must match or remain compatible:

26-position, 2-row configuration at 0.100" (2.54mm) pitch
Through-hole mounting with solder termination
Male pin contact type with square geometry
Push-pull fastening mechanism
UL94 V-0 flammability rating
Black insulation color
MSL 1 (Unlimited) moisture sensitivity

Variations in the following parameters are permitted within the substitute group:

Contact finish material (Gold, Tin, or combinations thereof)
Contact finish thickness on mating surfaces
Contact post length (affects overall contact length)
Insulation material composition (LCP or PBT acceptable)
Operating temperature range
Contact material (Phosphor Bronze or Copper Alloy acceptable)
RoHS compliance status

The TE Connectivity 6-146256-3 qualifies as a primary substitute with identical pitch, position count, and mounting configuration. The Samtec TSW series (TSW-113-07-L-D, TSW-113-07-T-D, TSW-113-08-G-D, TSW-113-08-L-D, TSW-113-08-T-D, TSW-113-23-G-D, TSW-113-23-S-D, TSW-113-23-T-D, TSW-113-26-G-D) provides multiple substitution options with variations in contact post length and finish specifications.

Parameter Comparison

Parameter	69192-626	6-146256-3	TSW-113-07-L-D	TSW-113-07-T-D	TSW-113-08-G-D	TSW-113-08-L-D	TSW-113-08-T-D	TSW-113-23-G-D	TSW-113-23-S-D	TSW-113-23-T-D	TSW-113-26-G-D
Manufacturer	Amphenol ICC	TE Connectivity	Samtec	Samtec	Samtec	Samtec	Samtec	Samtec	Samtec	Samtec	Samtec
Connector Type	Header	Header, Breakaway	Header	Header	Header	Header	Header	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Number of Positions	26	26	26	26	26	26	26	26	26	26	26
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Kinked Pin, Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Fastening Type	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull
Contact Shape	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Contact Material	Phosphor Bronze	Copper Alloy	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze
Contact Finish - Mating	Gold or Gold, GXT™	Gold	Gold	Tin	Gold	Gold	Tin	Gold	Gold	Tin	Gold
Contact Finish Thickness - Mating	30.0µin (0.76µm)	15.0µin (0.38µm)	10.0µin (0.25µm)	—	10.0µin (0.25µm)	10.0µin (0.25µm)	—	10.0µin (0.25µm)	30.0µin (0.76µm)	—	10.0µin (0.25µm)
Contact Length - Post	0.120" (3.05mm)	0.120" (3.05mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.200" (5.08mm)	0.200" (5.08mm)	0.200" (5.08mm)	0.115" (2.92mm)	0.115" (2.92mm)	0.115" (2.92mm)	0.126" (3.20mm)
Overall Contact Length	0.450" (11.43mm)	0.440" (11.18mm)	0.430" (10.92mm)	0.430" (10.92mm)	0.530" (13.46mm)	0.530" (13.46mm)	0.530" (13.46mm)	0.445" (11.30mm)	0.445" (11.30mm)	0.445" (11.30mm)	0.456" (11.58mm)
Insulation Height	0.100" (2.54mm)	0.090" (2.29mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Insulation Material	—	Liquid Crystal Polymer (LCP)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Insulation Color	Black	Black	Black	Black	Black	Black	Black	Black	Black	Black	Black
Operating Temperature	—	-65°C ~ 105°C	-55°C ~ 125°C	-55°C ~ 105°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 105°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 105°C	-55°C ~ 125°C
Current Rating (Amps)	—	3A	—	—	—	—	—	—	—	—	—
RoHS Status	RoHS non-compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

All substitute parts listed maintain active product status and meet the core mechanical and electrical requirements for direct substitution with the 69192-626. Selection among substitutes should be based on the following criteria:

RoHS Compliance: The 69192-626 is RoHS non-compliant. All listed substitutes (TE Connectivity 6-146256-3 and Samtec TSW series) are ROHS3 compliant. Applications requiring RoHS compliance must use substitute parts.

Contact Post Length Variations: Samtec TSW series parts offer three post length options affecting overall contact length. TSW-113-23-S-D, TSW-113-23-G-D, and TSW-113-23-T-D provide post lengths of 0.115" (2.92mm), closest to the original 0.120" (3.05mm). TSW-113-07-L-D and TSW-113-07-T-D provide 0.100" (2.54mm) posts for reduced stack height. TSW-113-08-G-D, TSW-113-08-L-D, and TSW-113-08-T-D provide 0.200" (5.08mm) posts for extended reach. TSW-113-26-G-D provides 0.126" (3.20mm) posts for minimal deviation from original specifications.

Contact Finish Selection: Gold-finished mating surfaces (TSW-113-07-L-D, TSW-113-08-G-D, TSW-113-08-L-D, TSW-113-23-G-D, TSW-113-26-G-D) match the original specification. Tin-finished alternatives (TSW-113-07-T-D, TSW-113-08-T-D, TSW-113-23-T-D) are available for cost optimization. TSW-113-23-S-D combines gold mating finish (30.0µin thickness matching the original) with tin post finish.

Operating Temperature Range: Samtec TSW series parts rated to -55°C ~ 125°C provide extended upper temperature capability compared to TE Connectivity 6-146256-3 (-65°C ~ 105°C). Applications requiring operation above 105°C must use Samtec parts. TSW-113-07-T-D, TSW-113-08-T-D, and TSW-113-23-T-D are limited to -55°C ~ 105°C.

Insulation Material: TE Connectivity 6-146256-3 uses Liquid Crystal Polymer (LCP) insulation. Samtec TSW series uses Polybutylene Terephthalate (PBT). Both materials meet UL94 V-0 flammability requirements.

Inventory Availability: Current stock levels range from 807 to 1578 units across substitute options, providing supply flexibility.

Frequently Asked Questions (FAQ)

Q: Can TSW-113-23-S-D directly replace the 69192-626 in existing designs?

A: TSW-113-23-S-D meets all core mechanical and electrical parameters: 26 positions, 2.54mm pitch, through-hole mounting, square contacts, and UL94 V-0 rating. The contact post length of 0.115" (2.92mm) differs minimally from the original 0.120" (3.05mm), resulting in an overall contact length of 0.445" versus 0.450". This 0.005" difference is within typical PCB tolerance ranges. The gold mating finish thickness of 30.0µin matches the original specification exactly. Direct substitution is mechanically and electrically compatible.

Q: What is the difference between TSW-113-08-G-D and TSW-113-08-L-D?

A: Both parts share identical specifications except for contact post finish. TSW-113-08-G-D has gold-plated posts (3.00µin thickness), while TSW-113-08-L-D has tin-plated posts. Both provide 0.200" (5.08mm) post length and 0.100" (2.54mm) insulation height. The mating surface finish is gold on both parts at 10.0µin thickness. Selection depends on post material requirements for the mating connector.

Q: Is the TE Connectivity 6-146256-3 suitable for high-temperature applications?

A: TE Connectivity 6-146256-3 is rated for -65°C ~ 105°C operating temperature. Applications requiring sustained operation above 105°C must use Samtec TSW series parts rated to -55°C ~ 125°C (TSW-113-07-L-D, TSW-113-08-G-D, TSW-113-08-L-D, TSW-113-23-G-D, TSW-113-26-G-D). Parts with tin mating finish (TSW-113-07-T-D, TSW-113-08-T-D, TSW-113-23-T-D) are limited to -55°C ~ 105°C.

Q: Why do some substitute parts have different insulation heights?

A: TE Connectivity 6-146256-3 specifies 0.090" (2.29mm) insulation height compared to the original 0.100" (2.54mm). This 0.010" reduction affects the overall connector profile and mating surface alignment. All Samtec TSW series parts maintain 0.100" (2.54mm) insulation height matching the original specification. Connector selection must account for PCB layout and mating connector geometry to ensure proper alignment.

Q: Are all substitute parts RoHS compliant?

A: The original 69192-626 is RoHS non-compliant. All listed substitutes—TE Connectivity 6-146256-3 and all Samtec TSW series variants—are ROHS3 compliant. Applications subject to RoHS regulations must transition to compliant substitute parts.

Q: What post length option should I select for my application?

A: Post length selection depends on PCB thickness and mating connector depth. TSW-113-23-S-D, TSW-113-23-G-D, and TSW-113-23-T-D (0.115" posts) provide minimal deviation from the original 0.120" specification and are recommended for direct replacement in existing designs. TSW-113-07-L-D and TSW-113-07-T-D (0.100" posts) reduce overall stack height for compact assemblies. TSW-113-08-G-D, TSW-113-08-L-D, and TSW-113-08-T-D (0.200" posts) extend reach for thicker PCBs or recessed mating connectors. TSW-113-26-G-D (0.126" posts) provides minimal deviation for applications requiring precise height matching.

Q: Can I mix contact finishes within a single connector assembly?

A: The specifications provided describe complete connector assemblies with uniform contact finish across all 26 positions. Mixing finishes within a single part number is not supported. Select a single part number to ensure consistent contact finish across all positions.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message