Amphenol ICC 69192-526 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 69192-526 is a vertical through-hole rectangular connector header from the BERGSTIK® II series, configured for 26-position, 2-row board-to-board applications with 0.100" (2.54mm) pitch. This connector features male pins with kinked solder termination, gold-plated mating contacts, and unshrouded design. The part is active in production with 1027 units in current inventory.

Substitute parts are necessary when the original part becomes unavailable, when alternative compliance certifications are required (such as RoHS3 compliance), or when specific contact finish or post length variations are needed for particular application requirements.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Number of Positions	26
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Termination	Kinked Pin, Solder
Contact Length - Mating	0.230" (5.84mm)
Contact Length - Post	0.120" (3.05mm)
Insulation Height	0.100" (2.54mm)
Contact Shape	Square
Contact Finish - Mating	Gold or Gold, GXT™
Contact Material	Phosphor Bronze
Material Flammability Rating	UL94 V-0
Insulation Color	Black
Moisture Sensitivity Level (MSL)	1 (Unlimited)
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitution for the 69192-526 is determined by strict adherence to the following critical parameters:

Core Compatibility Parameters:

26 positions, 2-row configuration
0.100" (2.54mm) mating pitch and row spacing
Male pin contact type
Through-hole mounting with solder termination
Square contact shape
0.230" (5.84mm) mating contact length
UL94 V-0 flammability rating
Black insulation color
MSL 1 rating

Variable Parameters Allowing Substitution:

Contact finish on mating surface (Gold or Tin)
Contact finish on post (Gold or Tin)
Contact post length (0.100" to 0.200")
Overall contact length (varies with post length)
Insulation material (LCP or PBT acceptable)
Contact material (Phosphor Bronze or Copper Alloy)
Operating temperature range
RoHS compliance status

The substitute parts listed below maintain all core compatibility parameters while offering variations in contact finish, post length, and compliance certifications.

Parameter Comparison

Parameter	69192-526 (Amphenol ICC)	6-146256-3 (TE Connectivity)	TSW-113-07-L-D (Samtec)	TSW-113-07-T-D (Samtec)	TSW-113-08-G-D (Samtec)	TSW-113-08-L-D (Samtec)	TSW-113-08-T-D (Samtec)	TSW-113-23-G-D (Samtec)	TSW-113-23-S-D (Samtec)	TSW-113-23-T-D (Samtec)	TSW-113-26-G-D (Samtec)
Manufacturer	Amphenol ICC	TE Connectivity	Samtec	Samtec	Samtec	Samtec	Samtec	Samtec	Samtec	Samtec	Samtec
Number of Positions	26	26	26	26	26	26	26	26	26	26	26
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Kinked Pin, Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Contact Length - Mating	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)
Contact Length - Post	0.120" (3.05mm)	0.120" (3.05mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.200" (5.08mm)	0.200" (5.08mm)	0.200" (5.08mm)	0.115" (2.92mm)	0.115" (2.92mm)	0.115" (2.92mm)	0.126" (3.20mm)
Overall Contact Length	0.450" (11.43mm)	0.440" (11.18mm)	0.430" (10.92mm)	0.430" (10.92mm)	0.530" (13.46mm)	0.530" (13.46mm)	0.530" (13.46mm)	0.445" (11.30mm)	0.445" (11.30mm)	0.445" (11.30mm)	0.456" (11.58mm)
Insulation Height	0.100" (2.54mm)	0.090" (2.29mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Contact Shape	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Contact Finish - Mating	Gold or Gold, GXT™	Gold	Gold	Tin	Gold	Gold	Tin	Gold	Gold	Tin	Gold
Contact Finish Thickness - Mating	15.0µin (0.38µm)	15.0µin (0.38µm)	10.0µin (0.25µm)	Not specified	10.0µin (0.25µm)	10.0µin (0.25µm)	Not specified	10.0µin (0.25µm)	30.0µin (0.76µm)	Not specified	10.0µin (0.25µm)
Contact Finish - Post	Not specified	Tin	Tin	Tin	Gold	Tin	Tin	Gold	Tin	Tin	Gold
Contact Material	Phosphor Bronze	Copper Alloy	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze
Insulation Material	Not specified	Liquid Crystal Polymer (LCP)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Insulation Color	Black	Black	Black	Black	Black	Black	Black	Black	Black	Black	Black
Operating Temperature	Not specified	-65°C ~ 105°C	-55°C ~ 125°C	-55°C ~ 105°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 105°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 105°C	-55°C ~ 125°C
Current Rating (Amps)	Not specified	3A	Not specified	Not specified	Not specified	Not specified	Not specified	Not specified	Not specified	Not specified	Not specified
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
RoHS Status	RoHS non-compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

All substitute parts listed maintain active product status and are manufactured by established connector suppliers (TE Connectivity and Samtec). The primary distinction between the original 69192-526 and substitute options is RoHS compliance status.

For RoHS3 Compliant Applications: The TE Connectivity 6-146256-3 and all Samtec TSW-113 variants provide ROHS3 compliance. Selection among Samtec options depends on contact post length requirements:

TSW-113-07-L-D and TSW-113-07-T-D: 0.100" post length
TSW-113-08-G-D, TSW-113-08-L-D, TSW-113-08-T-D: 0.200" post length
TSW-113-23-G-D, TSW-113-23-S-D, TSW-113-23-T-D: 0.115" post length
TSW-113-26-G-D: 0.126" post length

For Non-Compliant Applications: The original 69192-526 remains the primary choice when RoHS compliance is not required.

Contact Finish Considerations: Gold-finished mating contacts (TSW-113-07-L-D, TSW-113-08-G-D, TSW-113-08-L-D, TSW-113-23-G-D, TSW-113-23-S-D, TSW-113-26-G-D) provide enhanced corrosion resistance. Tin-finished options (TSW-113-07-T-D, TSW-113-08-T-D, TSW-113-23-T-D) are suitable for standard applications.

Insulation Height Variance: The TE Connectivity 6-146256-3 features 0.090" insulation height compared to the standard 0.100" specification. This minor reduction may affect board layout compatibility in space-constrained designs.

Frequently Asked Questions (FAQ)

Q: Can TSW-113 series connectors directly replace the 69192-526 in existing designs?

A: TSW-113 series connectors are mechanically and electrically compatible with the 69192-526 for 26-position, 2-row, 0.100" pitch applications. However, variations in contact post length (0.100" to 0.200" versus the original 0.120") may require PCB layout verification. Consult your PCB design specifications to confirm post length compatibility.

Q: What is the difference between the various TSW-113 part number suffixes?

A: The TSW-113 suffix designations indicate contact post length and finish combinations. The numeric portion (07, 08, 23, 26) specifies post length in 0.01" increments. The letter suffix indicates contact finish: L = Gold mating/Tin post, T = Tin mating/Tin post, G = Gold mating/Gold post, S = Gold mating (thicker)/Tin post.

Q: Is the TE Connectivity 6-146256-3 suitable as a direct substitute?

A: The 6-146256-3 is electrically and mechanically compatible with the 69192-526. The primary differences are insulation material (LCP versus unspecified), insulation height (0.090" versus 0.100"), and RoHS3 compliance. Verify that the reduced insulation height does not conflict with your PCB design requirements.

Q: Why do some substitute parts have different operating temperature ranges?

A: Operating temperature ranges are determined by the insulation material and contact material specifications. Samtec TSW-113 variants with PBT insulation support -55°C to 125°C, while TE Connectivity 6-146256-3 with LCP insulation supports -65°C to 105°C. Select based on your application's thermal requirements.

Q: Are all substitute parts RoHS3 compliant?

A: All Samtec TSW-113 variants and the TE Connectivity 6-146256-3 are ROHS3 compliant. The original Amphenol ICC 69192-526 is RoHS non-compliant. For applications requiring RoHS compliance, select from the substitute options listed.

Q: What is the significance of contact finish thickness variations?

A: Contact finish thickness affects durability and corrosion resistance. The 69192-526 specifies 15.0µin (0.38µm) gold thickness on mating contacts. Samtec TSW-113 variants with standard gold finish provide 10.0µin (0.25µm), while TSW-113-23-S-D provides enhanced 30.0µin (0.76µm) thickness for extended service life in corrosive environments.

Q: Can I mix different TSW-113 variants in the same assembly?

A: Yes, all TSW-113 variants maintain identical mating pitch, row spacing, and contact mating length. Mixing variants with different post lengths is acceptable provided each connector's post length is appropriate for its respective PCB thickness and application requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message