Amphenol ICC 69192-514 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 69192-514 is a vertical through-hole rectangular connector header from the BERGSTIK® II series, configured for 14 positions in a 2-row arrangement with 0.100" (2.54mm) pitch. This connector is designed for board-to-board applications with male pin contacts, kinked pin solder termination, and push-pull fastening. The part is currently active in production with 1020 units in stock.

Substitute parts are necessary when the original BERGSTIK® II series becomes unavailable, when alternative contact finishes or insulation materials are required for specific environmental or compliance requirements, or when different post lengths are needed for PCB assembly variations.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Pitch - Mating	0.100" (2.54mm)
Number of Positions	14
Number of Rows	2
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Termination	Solder
Fastening Type	Push-Pull
Contact Length - Mating	0.230" (5.84mm)
Shrouding	Unshrouded
Material Flammability Rating	UL94 V-0
Insulation Color	Black
RoHS Status	RoHS non-compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the 69192-514 is determined by strict alignment of the following core parameters:

Connector Type: Header (with or without breakaway feature)
Contact Type: Male Pin
Pitch - Mating: 0.100" (2.54mm)
Number of Positions: 14
Number of Rows: 2
Row Spacing - Mating: 0.100" (2.54mm)
Mounting Type: Through Hole
Termination: Solder
Fastening Type: Push-Pull
Contact Length - Mating: 0.230" (5.84mm)
Shrouding: Unshrouded
Material Flammability Rating: UL94 V-0
Insulation Color: Black

Substitute parts may vary in the following parameters without affecting functional compatibility:

Contact Material (Phosphor Bronze or Copper Alloy)
Contact Finish - Mating (Gold, Tin, or combinations)
Contact Finish Thickness - Mating
Insulation Material (Thermoplastic, Liquid Crystal Polymer, or Polybutylene Terephthalate)
Contact Length - Post (within assembly tolerance ranges)
Overall Contact Length (dependent on post length variation)
Insulation Height (minor variations acceptable)
Operating Temperature range (if application requirements are met)
RoHS compliance status (if regulatory requirements permit)
Manufacturer and series designation

Parameter Comparison

Parameter	69192-514 (Main)	104350-7	5-146254-7	5-146256-7	5-146257-7	5-146258-7	TSW-107-08-L-D	TSW-107-08-T-D	TSW-107-23-S-D	TSW-107-23-T-D
Manufacturer	Amphenol ICC	TE Connectivity	TE Connectivity	TE Connectivity	TE Connectivity	TE Connectivity	Samtec Inc.	Samtec Inc.	Samtec Inc.	Samtec Inc.
Series	BERGSTIK® II	AMPMODU Mod II	AMPMODU Mod II	AMPMODU Mod II	AMPMODU Mod II	AMPMODU Mod II	TSW	TSW	TSW	TSW
Product Status	Active	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active
Connector Type	Header	Header, Breakaway	Header, Breakaway	Header, Breakaway	Header, Breakaway	Header, Breakaway	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Number of Positions	14	14	14	14	14	14	14	14	14	14
Number of Rows	2	2	2	2	2	2	2	2	2	2
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Kinked Pin, Solder	Press-Fit, Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Fastening Type	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull
Contact Length - Mating	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)
Contact Length - Post	0.120" (3.05mm)	0.120" (3.05mm)	0.120" (3.05mm)	0.120" (3.05mm)	0.120" (3.05mm)	0.090" (2.29mm)	0.200" (5.08mm)	0.200" (5.08mm)	0.115" (2.92mm)	0.115" (2.92mm)
Overall Contact Length	0.450" (11.43mm)	0.440" (11.18mm)	0.440" (11.18mm)	0.440" (11.18mm)	0.440" (11.18mm)	0.410" (10.41mm)	0.530" (13.46mm)	0.530" (13.46mm)	0.445" (11.30mm)	0.445" (11.30mm)
Insulation Height	0.100" (2.54mm)	0.090" (2.29mm)	0.090" (2.29mm)	0.090" (2.29mm)	0.090" (2.29mm)	0.090" (2.29mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Contact Shape	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Contact Material	Phosphor Bronze	Copper Alloy	Copper Alloy	Copper Alloy	Copper Alloy	Copper Alloy	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze
Contact Finish - Mating	Gold or Gold, GXT™	Gold	Tin	Gold	Gold	Tin	Gold	Tin	Gold	Tin
Contact Finish Thickness - Mating	15.0µin (0.38µm)	30.0µin (0.76µm)	100.0µin (2.54µm)	15.0µin (0.38µm)	30.0µin (0.76µm)	100.0µin (2.54µm)	10.0µin (0.25µm)	Not specified	30.0µin (0.76µm)	Not specified
Contact Finish - Post	Not specified	Tin-Lead	Tin	Tin	Tin	Tin	Tin	Tin	Tin	Tin
Shrouding	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Insulation Color	Black	Black	Black	Black	Black	Black	Black	Black	Black	Black
Operating Temperature	Not specified	-65°C ~ 105°C	-65°C ~ 105°C	-65°C ~ 105°C	-65°C ~ 105°C	-65°C ~ 105°C	-55°C ~ 125°C	-55°C ~ 105°C	-55°C ~ 125°C	-55°C ~ 105°C
Current Rating (Amps)	Not specified	3A	3A	3A	3A	3A	Not specified	Not specified	Not specified	Not specified
RoHS Status	RoHS non-compliant	RoHS non-compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Inventory (Pcs)	1020	799	6086	4784	5155	12848	1250	819	1123	831

Engineering Selection Recommendations

All listed substitute parts meet the core functional requirements for direct replacement of the 69192-514 in standard through-hole PCB applications with 0.100" (2.54mm) pitch, 14-position, 2-row header configurations.

TE Connectivity AMPMODU Mod II Series (5-146254-7, 5-146256-7, 5-146257-7, 5-146258-7):

These parts are functionally equivalent with identical mating contact length and row spacing. Parts 5-146254-7, 5-146256-7, 5-146257-7, and 5-146258-7 are all active products with ROHS3 compliance. Part 104350-7 is obsolete and should not be selected for new designs. The AMPMODU Mod II series offers higher inventory availability (4784 to 12848 units) compared to the original part. Contact finish options include Tin (5-146254-7, 5-146258-7) and Gold (5-146256-7, 5-146257-7) with varying thickness specifications. Post length variations exist: 5-146254-7, 5-146256-7, and 5-146257-7 maintain the 0.120" (3.05mm) post length matching the original, while 5-146258-7 has a shorter 0.090" (2.29mm) post length suitable for lower-profile PCB assemblies.

Samtec TSW Series (TSW-107-08-L-D, TSW-107-08-T-D, TSW-107-23-S-D, TSW-107-23-T-D):

These parts are active products with ROHS3 compliance and extended operating temperature ranges (-55°C to 125°C for models with "23" designation). The TSW series uses Phosphor Bronze contact material matching the original part. Contact finish options include Gold (TSW-107-08-L-D, TSW-107-23-S-D) and Tin (TSW-107-08-T-D, TSW-107-23-T-D). Post length variations are available: TSW-107-08-L-D and TSW-107-08-T-D have longer 0.200" (5.08mm) posts for deeper PCB penetration, while TSW-107-23-S-D and TSW-107-23-T-D have 0.115" (2.92mm) posts closer to the original specification. Insulation material is Polybutylene Terephthalate (PBT) rather than the unspecified material of the original part.

For applications requiring RoHS3 compliance, select from the TE Connectivity AMPMODU Mod II active series or any Samtec TSW variant. For applications with extended temperature requirements beyond -65°C to 105°C, select Samtec TSW-107-23-S-D or TSW-107-23-T-D. For post length matching the original 0.120" (3.05mm) specification, select TE Connectivity 5-146254-7, 5-146256-7, or 5-146257-7, or Samtec TSW-107-23-S-D or TSW-107-23-T-D.

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with a different contact post length?

A: Yes, substitute parts with different post lengths are functionally compatible if the PCB hole depth and assembly process accommodate the variation. TSW-107-08-L-D and TSW-107-08-T-D have longer 0.200" (5.08mm) posts suitable for thicker PCBs or applications requiring deeper solder joint penetration. The 5-146258-7 has a shorter 0.090" (2.29mm) post for low-profile assemblies. Verify PCB thickness and solder reflow profile compatibility before selection.

Q: What is the difference between Gold and Tin contact finishes?

A: Gold-finished contacts (69192-514, 5-146256-7, 5-146257-7, TSW-107-08-L-D, TSW-107-23-S-D) provide superior corrosion resistance and are preferred for applications with extended storage or high-humidity environments. Tin-finished contacts (5-146254-7, 5-146258-7, TSW-107-08-T-D, TSW-107-23-T-D) offer cost advantages and are suitable for standard industrial applications with normal environmental conditions. Both finishes are compatible with standard solder reflow processes.

Q: Why is the 104350-7 listed as obsolete?

A: The TE Connectivity 104350-7 is marked as obsolete product status, indicating it is no longer in active production. For new designs and ongoing production, select from active products: 5-146254-7, 5-146256-7, 5-146257-7, 5-146258-7 from TE Connectivity, or any variant from the Samtec TSW-107 series.

Q: Are all substitute parts RoHS compliant?

A: The original 69192-514 is RoHS non-compliant. All TE Connectivity AMPMODU Mod II active variants (5-146254-7, 5-146256-7, 5-146257-7, 5-146258-7) are ROHS3 compliant. All Samtec TSW-107 variants are ROHS3 compliant. If RoHS3 compliance is required, avoid the obsolete 104350-7 and select from the active compliant alternatives.

Q: What is the difference between AMPMODU Mod II and TSW series?

A: Both series are functionally equivalent for this 14-position, 2-row, 0.100" pitch application. The AMPMODU Mod II series uses Copper Alloy contacts with Liquid Crystal Polymer (LCP) or unspecified insulation material. The TSW series uses Phosphor Bronze contacts with Polybutylene Terephthalate (PBT) insulation. The TSW series offers extended temperature ratings up to 125°C for certain variants. Select based on contact material preference, insulation material requirements, and temperature operating range.

Q: Can I mix substitute parts from different manufacturers in the same assembly?

A: Yes, all listed substitute parts are mechanically and electrically compatible for use in the same PCB assembly. However, for consistency in procurement, testing, and documentation, it is recommended to standardize on a single manufacturer and part number per design revision.

Q: What inventory levels should I consider?

A: The 5-146258-7 offers the highest inventory availability at 12848 units, followed by 5-146254-7 at 6086 units and 5-146256-7 at 4784 units. The original 69192-514 has 1020 units available. For high-volume production or long-term supply security, prioritize parts with higher inventory levels.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message