Amphenol ICC 69192-172H Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 69192-172H is a rectangular connector header for through-hole mounting, featuring 72 positions arranged in 2 rows with 0.100" (2.54mm) pitch. This BERGSTIK® II series connector is designed for board-to-board applications with unshrouded, push-pull fastening. The part is active and currently in stock with 1168 units available. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling component interchangeability in applications where the primary part becomes unavailable or when design requirements permit alternative contact finishes or post lengths.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Number of Positions	72
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Termination	Kinked Pin, Solder
Fastening Type	Push-Pull
Contact Length - Mating	0.230" (5.84mm)
Contact Length - Post	0.120" (3.05mm)
Overall Contact Length	0.450" (11.43mm)
Insulation Height	0.100" (2.54mm)
Contact Shape	Square
Contact Finish - Mating	Gold or Gold, GXT™
Contact Material	Phosphor Bronze
Material Flammability Rating	UL94 V-0
Insulation Color	Black
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Product Status	Active
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitute parts for the 69192-172H are qualified based on strict alignment with core electrical and mechanical parameters: 72-position, 2-row configuration; 0.100" (2.54mm) mating pitch and row spacing; male pin contact type; through-hole mounting; push-pull fastening; square contact shape; phosphor bronze contact material; and UL94 V-0 flammability rating. Substitutes are grouped by contact post length, which determines overall connector height and PCB stack-up compatibility. The primary differentiator among qualified substitutes is the contact post length, ranging from 0.100" to 0.820", allowing selection based on specific board thickness and mating depth requirements. Contact finish variations (gold vs. tin) and finish thickness are secondary parameters that do not prevent substitution when electrical performance and mechanical fit are maintained.

Parameter Comparison

Parameter	69192-172H (Amphenol ICC)	PBC36DAAN (Sullins)	PBC36DABN (Sullins)	PBC36DACN (Sullins)	PBC36DAFN (Sullins)	PBC36DAHN (Sullins)	PEC36DAAN (Sullins)	PEC36DABN (Sullins)	TSW-136-07-G-D (Samtec)	TSW-136-07-L-D (Samtec)	TSW-136-07-S-D (Samtec)
Connector Type	Header	Header, Breakaway	Header, Breakaway	Header, Breakaway	Header, Breakaway	Header, Breakaway	Header, Breakaway	Header, Breakaway	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Number of Positions	72	72	72	72	72	72	72	72	72	72	72
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Kinked Pin, Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Fastening Type	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull
Contact Length - Mating	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)
Contact Length - Post	0.120" (3.05mm)	0.120" (3.05mm)	0.230" (5.84mm)	0.320" (8.13mm)	0.620" (15.75mm)	0.820" (20.83mm)	0.120" (3.05mm)	0.230" (5.84mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Overall Contact Length	0.450" (11.43mm)	0.450" (11.43mm)	0.560" (14.22mm)	0.650" (16.51mm)	0.950" (24.13mm)	1.150" (29.21mm)	0.450" (11.43mm)	0.560" (14.22mm)	0.430" (10.92mm)	0.430" (10.92mm)	0.430" (10.92mm)
Insulation Height	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Contact Shape	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Contact Finish - Mating	Gold or Gold, GXT™	Gold	Gold	Gold	Gold	Gold	Tin	Tin	Gold	Gold	Gold
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Insulation Color	Black	Black	Black	Black	Black	Black	Black	Black	Black	Black	Black
Operating Temperature	Not specified	-65°C ~ 125°C	-65°C ~ 125°C	-65°C ~ 125°C	-65°C ~ 125°C	-65°C ~ 125°C	-65°C ~ 125°C	-65°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C
Current Rating (Amps)	Not specified	3A	3A	3A	3A	3A	3A	3A	Not specified	Not specified	Not specified
RoHS Status	RoHS non-compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	Not Applicable	Not Applicable	Not Applicable	Not Applicable	1 (Unlimited)	Not Applicable	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Product Status	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

All listed substitute parts maintain active product status and are manufactured by established connector suppliers. The Sullins Connector Solutions PBC36 and PEC36 series parts, along with Samtec TSW-136 series parts, are ROHS3 compliant, providing regulatory advantage over the RoHS non-compliant 69192-172H. Selection among substitutes is determined by contact post length requirements, which directly impact PCB stack-up and mating depth. The PBC36DAAN and PEC36DAAN variants match the original 0.120" (3.05mm) post length and 0.450" (11.43mm) overall contact length, providing direct mechanical equivalence. Extended post length variants (PBC36DABN through PBC36DAHN) accommodate thicker PCB assemblies or deeper mating requirements. Samtec TSW-136 series parts feature shorter post lengths (0.100" / 2.54mm) and reduced overall contact length (0.430" / 10.92mm), suitable for compact applications with tighter vertical constraints. Contact finish selection between gold and tin does not affect substitution eligibility; both finishes provide equivalent electrical performance within the specified operating parameters.

Frequently Asked Questions (FAQ)

Q: Can PBC36DAAN be used as a direct replacement for 69192-172H? A: Yes. PBC36DAAN matches the critical mechanical parameters: 72 positions, 2 rows, 0.100" pitch, 0.120" post length, and 0.450" overall contact length. Both feature square phosphor bronze contacts with UL94 V-0 insulation. The primary difference is RoHS compliance status; PBC36DAAN is ROHS3 compliant.

Q: What is the difference between PBC36DAAN and PBC36DABN? A: The contact post length differs. PBC36DAAN has 0.120" (3.05mm) post length with 0.450" overall contact length, while PBC36DABN has 0.230" (5.84mm) post length with 0.560" overall contact length. Selection depends on PCB thickness and mating depth requirements.

Q: Are Samtec TSW-136 parts compatible with the 69192-172H footprint? A: Samtec TSW-136 parts share the same 72-position, 2-row, 0.100" pitch configuration and contact mating length (0.230"). However, they feature shorter post lengths (0.100" vs. 0.120") and reduced overall contact length (0.430" vs. 0.450"), requiring verification of PCB stack-up compatibility before substitution.

Q: Does contact finish affect substitution compatibility? A: Contact finish (gold vs. tin) does not prevent substitution. Both finishes provide equivalent electrical performance. Selection is based on application requirements and environmental exposure. Gold finishes offer enhanced corrosion resistance; tin finishes are cost-effective for standard applications.

Q: What is the significance of the "Breakaway" connector type in Sullins parts? A: Breakaway designation indicates the connector supports individual position separation. This feature does not affect compatibility with the 69192-172H in standard board-to-board applications where the full 72-position connector is used.

Q: Can I substitute a part with different operating temperature range? A: Operating temperature range is not a substitution-limiting parameter for these parts. Sullins PBC36 and PEC36 series operate at -65°C ~ 125°C, while Samtec TSW-136 operates at -55°C ~ 125°C. Selection should align with application thermal requirements, but the difference does not prevent mechanical or electrical substitution.

Q: Why are some parts listed as ROHS3 compliant while the original is RoHS non-compliant? A: The 69192-172H predates RoHS3 requirements. All substitute parts listed are current production items manufactured to ROHS3 standards, providing regulatory compliance for new designs or applications requiring RoHS certification.

Q: What does MSL (Moisture Sensitivity Level) mean for these connectors? A: MSL 1 (Unlimited) indicates the component has no moisture sensitivity restrictions and requires no special storage or handling. Parts listed as "Not Applicable" are not moisture-sensitive. This parameter does not affect substitution eligibility.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message