Amphenol ICC 69192-128 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 69192-128 is a rectangular connector header for through-hole mounting with 28 positions arranged in 2 rows at 0.100" (2.54mm) pitch. This connector is part of the BERGSTIK® II series and features male pins with kinked pin solder termination and push-pull fastening. The part is currently obsolete, making equivalent substitutes necessary for new designs and ongoing production support.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Number of Positions	28
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Termination	Kinked Pin, Solder
Fastening Type	Push-Pull
Contact Length - Mating	0.230" (5.84mm)
Insulation Height	0.100" (2.54mm)
Contact Shape	Square
Contact Material	Phosphor Bronze
Material Flammability Rating	UL94 V-0
Insulation Color	Black
RoHS Status	RoHS non-compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution for the 69192-128 is determined by strict equivalence in the following critical parameters:

Connector type (Header)
Contact type (Male Pin)
Number of positions (28) and row configuration (2 rows)
Pitch spacing (0.100" / 2.54mm for both mating and row spacing)
Mounting method (Through Hole)
Fastening type (Push-Pull)
Contact length at mating interface (0.230" / 5.84mm)
Insulation height (0.100" / 2.54mm)
Contact shape (Square)
Contact material (Phosphor Bronze)
Flammability rating (UL94 V-0)

Substitutes are grouped into two categories:

Category 1: Direct Amphenol ICC Substitute The 69192-128HLF is the active production equivalent from the same manufacturer and series, differing only in packaging format and compliance status.

Category 2: Cross-Manufacturer Substitutes (Samtec Inc.) The Samtec TSW and HTSW series headers meet all critical electrical and mechanical parameters. Variations within these series differ in contact post length and contact finish specifications, which do not affect mating compatibility with the original 69192-128 footprint.

Parameter Comparison

Parameter	69192-128	69192-128HLF	HTSW-114-07-L-D	TSW-114-07-G-D	TSW-114-07-L-D	TSW-114-07-S-D	TSW-114-07-T-D	TSW-114-08-G-D	TSW-114-08-L-D	TSW-114-08-T-D	TSW-114-10-G-D
Manufacturer	Amphenol ICC	Amphenol ICC	Samtec Inc.	Samtec Inc.	Samtec Inc.	Samtec Inc.	Samtec Inc.	Samtec Inc.	Samtec Inc.	Samtec Inc.	Samtec Inc.
Connector Type	Header	Header	Header	Header	Header	Header	Header	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Number of Positions	28	28	28	28	28	28	28	28	28	28	28
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Kinked Pin, Solder	Kinked Pin, Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Fastening Type	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull
Contact Length - Mating	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)
Contact Length - Post	0.120" (3.05mm)	0.120" (3.05mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.200" (5.08mm)	0.200" (5.08mm)	0.200" (5.08mm)	0.500" (12.70mm)
Overall Contact Length	0.450" (11.43mm)	0.450" (11.43mm)	0.430" (10.92mm)	0.430" (10.92mm)	0.430" (10.92mm)	0.430" (10.92mm)	0.430" (10.92mm)	0.530" (13.46mm)	0.530" (13.46mm)	0.530" (13.46mm)	0.830" (21.08mm)
Insulation Height	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Contact Shape	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Contact Finish - Mating	Gold or Gold, GXT™	Gold or Gold, GXT™	Gold	Gold	Gold	Gold	Tin	Gold	Gold	Tin	Gold
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active
RoHS Status	RoHS non-compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

Primary Recommendation: 69192-128HLF

The 69192-128HLF is the direct active production equivalent from Amphenol ICC. It maintains identical electrical and mechanical specifications to the obsolete 69192-128, with the primary differences being active product status and RoHS compliance. This part is recommended for designs requiring minimal qualification effort and direct form-fit-function replacement.

Secondary Recommendation: Samtec TSW-114-07-L-D or TSW-114-07-G-D

These Samtec parts meet all critical mating interface parameters and are actively produced. The TSW-114-07-L-D features tin-plated posts, while TSW-114-07-G-D features gold-plated posts. Both are ROHS3 compliant and suitable for new designs. The contact post length differs slightly (0.100" vs. 0.120"), which does not affect mating compatibility but may require PCB layout verification for through-hole depth.

Alternative Options: TSW-114-08 and TSW-114-10 Series

The TSW-114-08 series provides extended contact post length (0.200"), and the TSW-114-10 series provides maximum post length (0.500"). These variants are suitable for applications requiring deeper PCB penetration or specific assembly requirements. All maintain identical mating interface geometry.

Contact Finish Considerations

Gold-finished contacts (TSW-114-07-G-D, TSW-114-08-G-D, TSW-114-10-G-D) provide superior corrosion resistance and are recommended for high-reliability applications. Tin-finished contacts (TSW-114-07-L-D, TSW-114-08-L-D) and tin-mating contacts (TSW-114-07-T-D, TSW-114-08-T-D) are suitable for standard industrial applications.

Frequently Asked Questions (FAQ)

Q: Can I use TSW-114 series headers as direct replacements for the 69192-128?

A: Yes. The TSW-114 series maintains identical mating interface geometry, pitch spacing, number of positions, and contact length at the mating surface. The primary difference is contact post length, which does not affect mating compatibility. PCB hole depth must be verified to accommodate the selected post length variant.

Q: What is the difference between TSW-114-07, TSW-114-08, and TSW-114-10 variants?

A: These designations indicate contact post length. The TSW-114-07 has 0.100" posts, TSW-114-08 has 0.200" posts, and TSW-114-10 has 0.500" posts. The mating interface remains identical across all variants. Selection depends on PCB thickness and assembly requirements.

Q: Does the contact finish affect mating compatibility?

A: No. Contact finish (gold, tin, or mixed) does not affect electrical mating compatibility. Selection should be based on application environment and corrosion resistance requirements. Gold finishes provide superior performance in high-reliability applications.

Q: Is the 69192-128HLF a true equivalent to the 69192-128?

A: Yes. The 69192-128HLF is the active production equivalent with identical form, fit, and function. The primary differences are packaging format and compliance status (RoHS compliant vs. non-compliant). It is the recommended substitute for direct replacement.

Q: What is the difference between Amphenol ICC and Samtec substitutes?

A: The 69192-128HLF is from the original manufacturer (Amphenol ICC) and requires minimal qualification. Samtec TSW and HTSW series are cross-manufacturer alternatives that meet all critical electrical and mechanical parameters but may require additional qualification depending on application requirements and supply chain preferences.

Q: Can I mix different post length variants in the same assembly?

A: Yes, provided PCB hole depth accommodates the longest post variant used. All variants maintain identical mating interface geometry and are mechanically compatible within the same connector footprint.

Q: Are there any temperature rating differences between substitutes?

A: The 69192-128 and 69192-128HLF do not specify operating temperature. Samtec TSW series operates from -55°C to 125°C. TSW-114-07-T-D and TSW-114-08-T-D (tin-mating finish) operate from -55°C to 105°C. HTSW-114-07-L-D operates from -55°C to 125°C. Application temperature requirements should guide selection.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message