Amphenol ICC 69192-124H Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 69192-124H is a rectangular connector header from the BERGSTIK® II series, designed for through-hole board-to-board applications. This unshrouded, 24-position header operates at 0.100" (2.54mm) pitch with male pins and kinked pin solder termination. The part is currently active in production with 1082 units in stock. Substitute parts are identified when electrical and mechanical parameters align with the original specification, enabling direct replacement in applications where component availability or supply chain considerations require alternative sourcing.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Pitch - Mating	0.100" (2.54mm)
Number of Positions	24
Number of Rows	2
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Style	Board to Board
Shrouding	Unshrouded
Contact Shape	Square
Insulation Height	0.100" (2.54mm)
Material Flammability Rating	UL94 V-0
Insulation Color	Black

Substitute Part Grouping Explanation

Substitute parts for the 69192-124H are qualified based on strict alignment of the following critical parameters:

Connector type (Header)
Contact type (Male Pin)
Mating pitch (0.100" / 2.54mm)
Position count (24 positions)
Row configuration (2 rows)
Row spacing (0.100" / 2.54mm)
Mounting method (Through Hole)
Style (Board to Board or Board to Board/Cable)
Shrouding (Unshrouded)
Contact shape (Square)
Insulation height (0.100" / 2.54mm)
Flammability rating (UL94 V-0)

Variations in contact finish, contact length, insulation material, and termination method (standard solder vs. kinked pin solder) do not disqualify substitution when all primary mechanical and electrical parameters match. Differences in operating temperature range, RoHS compliance status, and packaging format are noted but do not prevent functional equivalence in applications where these parameters are not design-critical constraints.

Parameter Comparison

Parameter	69192-124H (Amphenol ICC)	HTSW-112-07-F-D (Samtec)	HTSW-112-07-G-D (Samtec)	M20-9761246 (Harwin)	TSW-112-07-F-D (Samtec)	TSW-112-07-G-D (Samtec)	TSW-112-07-L-D (Samtec)	TSW-112-07-L-D-LL (Samtec)	TSW-112-07-S-D (Samtec)	TSW-112-07-S-D-LL (Samtec)	TSW-112-07-SM-D-LL (Samtec)
Connector Type	Header	Header	Header	Header, Cuttable	Header	Header	Header	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Number of Positions	24	24	24	24	24	24	24	24	24	24	24
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Style	Board to Board	Board to Board or Cable	Board to Board or Cable	Board to Board or Cable	Board to Board or Cable	Board to Board or Cable	Board to Board or Cable	Board to Board or Cable	Board to Board or Cable	Board to Board or Cable	Board to Board or Cable
Shrouding	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded
Contact Shape	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Insulation Height	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Contact Length - Mating	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.228" (5.80mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)
Contact Length - Post	0.120" (3.05mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.122" (3.10mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Overall Contact Length	0.450" (11.43mm)	0.430" (10.92mm)	0.430" (10.92mm)	0.452" (11.48mm)	0.430" (10.92mm)	0.430" (10.92mm)	0.430" (10.92mm)	0.430" (10.92mm)	0.430" (10.92mm)	0.430" (10.92mm)	0.430" (10.92mm)
Contact Finish - Mating	Gold or Gold, GXT™	Gold	Gold	Tin	Gold	Gold	Gold	Gold	Gold	Gold	Gold
Contact Finish Thickness - Mating	30.0µin (0.76µm)	3.00µin (0.076µm)	10.0µin (0.25µm)	Not specified	3.00µin (0.076µm)	10.0µin (0.25µm)	10.0µin (0.25µm)	10.0µin (0.25µm)	30.0µin (0.76µm)	30.0µin (0.76µm)	30.0µin (0.76µm)
Contact Finish - Post	Not specified	Tin	Gold	Tin	Tin	Gold	Tin	Tin	Tin	Tin	Tin
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Brass	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze
Insulation Material	Not specified	Liquid Crystal Polymer (LCP)	Liquid Crystal Polymer (LCP)	Polyamide (PA6T), Nylon 6T	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)
Termination	Kinked Pin, Solder	Solder	Solder	Solder	Solder	Solder	Solder	Kinked Pin, Solder	Solder	Kinked Pin, Solder	Kinked Pin, Solder
Operating Temperature	Not specified	-55°C ~ 125°C	-55°C ~ 125°C	-40°C ~ 105°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C
RoHS Status	RoHS non-compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

All listed substitute parts maintain active product status and are functionally equivalent to the 69192-124H based on core mechanical and electrical parameters. The primary distinction between the original part and substitutes is RoHS compliance status: the 69192-124H is RoHS non-compliant, while all substitute parts are ROHS3 compliant. This compliance difference may be relevant for applications subject to RoHS regulatory requirements.

Samtec TSW series parts (TSW-112-07-F-D, TSW-112-07-G-D, TSW-112-07-L-D, TSW-112-07-L-D-LL, TSW-112-07-S-D, TSW-112-07-S-D-LL, TSW-112-07-SM-D-LL) and Samtec HTSW series parts (HTSW-112-07-F-D, HTSW-112-07-G-D) are all active and available in quantity. The Harwin M20-9761246 is also active with high inventory availability.

Termination method variations exist: the original part features kinked pin solder termination, while most Samtec substitutes offer standard solder termination. The TSW-112-07-L-D-LL, TSW-112-07-S-D-LL, and TSW-112-07-SM-D-LL variants provide kinked pin solder termination matching the original specification. Contact finish thickness and post finish variations are documented but do not affect functional compatibility in standard through-hole board-to-board applications.

Frequently Asked Questions (FAQ)

Q: Can TSW-112-07-G-D replace 69192-124H directly in a board design?

A: Yes. Both parts share identical mating pitch (0.100"), position count (24), row configuration (2 rows), mounting type (through hole), and contact geometry. The TSW-112-07-G-D provides gold plating on both mating and post contacts, compared to the original specification. Both are UL94 V-0 rated and unshrouded.

Q: What is the difference between TSW-112-07-L-D and TSW-112-07-L-D-LL?

A: Both parts are electrically and mechanically identical. The primary difference is termination: TSW-112-07-L-D uses standard solder termination, while TSW-112-07-L-D-LL uses kinked pin solder termination. The kinked pin variant matches the original 69192-124H termination method.

Q: Does the Harwin M20-9761246 work as a substitute?

A: Yes. The M20-9761246 meets all critical parameters: 24 positions, 0.100" pitch, 2-row configuration, through-hole mounting, and unshrouded design. The part is cuttable, offers 3A per contact current rating, and operates from -40°C to 105°C. Contact material is brass rather than phosphor bronze, and contact finish is tin rather than gold, but these differences do not prevent functional substitution in standard applications.

Q: Why are there multiple Samtec TSW variants listed?

A: Samtec TSW variants differ in contact finish specifications and termination methods. TSW-112-07-F-D and TSW-112-07-S-D use standard solder termination with different mating contact finish thicknesses (3.00µin and 30.0µin respectively). TSW-112-07-G-D and TSW-112-07-L-D offer different post contact finishes (gold and tin respectively). The -LL suffix indicates kinked pin solder termination. All variants maintain the same core mechanical and electrical compatibility.

Q: Is RoHS compliance a functional requirement for substitution?

A: RoHS compliance is a regulatory and supply chain consideration, not a functional electrical or mechanical parameter. The 69192-124H is RoHS non-compliant, while all listed substitutes are ROHS3 compliant. Selection between compliant and non-compliant parts depends on application regulatory requirements and customer specifications, not on connector performance.

Q: What is the difference between HTSW and TSW series from Samtec?

A: Both HTSW and TSW series share identical mechanical and electrical specifications for the 24-position 0.100" pitch configuration. The HTSW series uses Liquid Crystal Polymer (LCP) insulation material, while TSW series uses Polybutylene Terephthalate (PBT) insulation. Both materials meet UL94 V-0 flammability requirements. Series selection depends on material compatibility requirements in specific applications.

Q: Can I use M20-9761246 if my design requires phosphor bronze contacts?

A: No. The M20-9761246 uses brass contacts, not phosphor bronze. If phosphor bronze contact material is a design requirement, select from Amphenol ICC 69192-124H, Samtec HTSW series, or Samtec TSW series parts, all of which use phosphor bronze.

Q: What is the operating temperature range for the 69192-124H?

A: The operating temperature range is not specified in the provided documentation. Samtec TSW and HTSW series parts operate from -55°C to 125°C. The Harwin M20-9761246 operates from -40°C to 105°C. If operating temperature is a design constraint, verify the original 69192-124H specification with Amphenol ICC or select a substitute with a documented temperature range matching application requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message