Amphenol ICC 69191-107 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 69191-107 is a rectangular connector header featuring right-angle through-hole mounting with 7 positions at 0.100" (2.54mm) pitch. This BERGSTIK® II series connector is designed for board-to-board applications requiring push-pull fastening and kinked pin solder termination. The part is currently active in production with 1095 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters align with application requirements, enabling component procurement flexibility and supply chain continuity.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Pitch - Mating	0.100" (2.54mm)
Number of Positions	7
Number of Rows	1
Mounting Type	Through Hole, Right Angle
Termination	Solder
Fastening Type	Push-Pull
Contact Shape	Square
Shrouding	Unshrouded
Material Flammability Rating	UL94 V-0
Insulation Color	Black
Product Status	Active

Substitute Part Grouping Explanation

Substitute parts for the 69191-107 are qualified based on the following critical parameters that determine functional equivalence:

Connector type (Header) and contact type (Male Pin)
Mating pitch of 0.100" (2.54mm)
7-position, single-row configuration
Through-hole, right-angle mounting orientation
Push-pull fastening mechanism
Solder termination capability
Square contact geometry
Unshrouded design
UL94 V-0 flammability rating
Black insulation color

The substitute parts identified—Würth Elektronik 61300711021 and Harwin Inc. M20-9750746—meet these core electrical and mechanical requirements. Variations in contact material, contact finish, insulation material composition, and operating temperature ranges do not preclude substitution when the primary functional parameters align.

Parameter Comparison

Parameter	69191-107 (Amphenol ICC)	61300711021 (Würth Elektronik)	M20-9750746 (Harwin Inc.)
Connector Type	Header	Header	Header, Cuttable
Contact Type	Male Pin	Male Pin	Male Pin
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Number of Positions	7	7	7
Number of Rows	1	1	1
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Kinked Pin, Solder	Solder	Solder
Fastening Type	Push-Pull	Push-Pull	Push-Pull
Contact Length - Mating	0.230" (5.84mm)	0.236" (6.00mm)	0.228" (5.80mm)
Contact Length - Post	0.120" (3.05mm)	0.118" (3.00mm)	0.118" (3.00mm)
Insulation Height	0.095" (2.41mm)	0.100" (2.54mm)	0.100" (2.54mm)
Contact Shape	Square	Square	Square
Contact Finish - Mating	Gold or Gold, GXT™	Gold	Tin
Contact Material	Phosphor Bronze	Copper Alloy	Brass
Insulation Material	Not specified	Polyamide (PA6T), Nylon 6T	Polyamide (PA6T), Nylon 6T
Shrouding	Unshrouded	Unshrouded	Unshrouded
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0
Insulation Color	Black	Black	Black
Product Status	Active	Active	Active
RoHS Status	RoHS non-compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

All three parts maintain active product status and meet the core functional requirements for 7-position, 2.54mm pitch right-angle header applications. The Würth Elektronik 61300711021 and Harwin Inc. M20-9750746 both achieve ROHS3 compliance, whereas the original Amphenol ICC 69191-107 is RoHS non-compliant. Selection between substitute parts should account for contact finish requirements (gold versus tin), operating temperature range specifications, and current rating specifications where applicable to the end application. Contact material and insulation material variations are within acceptable substitution parameters for board-to-board connector applications.

Frequently Asked Questions (FAQ)

Q: Can the Würth Elektronik 61300711021 directly replace the Amphenol ICC 69191-107?

A: Yes. Both parts share identical mating pitch (0.100"), position count (7), row configuration (1), mounting type (through-hole right-angle), fastening mechanism (push-pull), and flammability rating (UL94 V-0). Minor variations in contact length and insulation height fall within acceptable mechanical tolerances for board-to-board connector applications.

Q: What is the primary difference between the Harwin M20-9750746 and the original part?

A: The M20-9750746 features tin contact finish and brass contact material, compared to the gold finish and phosphor bronze of the 69191-107. The Harwin part also includes a cuttable header feature. Both maintain equivalent electrical and mechanical compatibility for standard board-to-board applications.

Q: Are there compliance differences between the substitute parts and the original?

A: Yes. The original Amphenol ICC 69191-107 is RoHS non-compliant, while both substitute parts (Würth Elektronik 61300711021 and Harwin Inc. M20-9750746) are ROHS3 compliant. Applications requiring RoHS compliance must use one of the substitute parts.

Q: Do the contact length variations affect interchangeability?

A: Contact length variations (69191-107: 0.230", 61300711021: 0.236", M20-9750746: 0.228") are within standard manufacturing tolerances for 2.54mm pitch connectors and do not affect mating compatibility or electrical performance in typical board-to-board applications.

Q: Which substitute part is recommended for high-temperature applications?

A: The Würth Elektronik 61300711021 supports operating temperatures from -40°C to 125°C. The Harwin M20-9750746 operates from -40°C to 105°C. Application temperature requirements should guide selection between these two options.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message