Amphenol ICC 69191-106 Rectangular Connector Header - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 69191-106 is a through-hole, right-angle rectangular connector header from the BERGSTIK® II series. This 6-position male pin header operates at 0.100" (2.54mm) pitch and is designed for board-to-board applications with push-pull fastening. The part is currently active in production with 907 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained while offering alternative compliance certifications or enhanced operational specifications.

Key Parameters

Parameter	Specification
Connector Type	Header
Contact Type	Male Pin
Number of Positions	6
Number of Rows	1
Pitch - Mating	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle
Termination	Kinked Pin, Solder
Contact Shape	Square
Contact Material	Phosphor Bronze
Contact Finish - Mating	Gold or Gold, GXT™
Contact Finish Thickness - Mating	30.0µin (0.76µm)
Insulation Height	0.095" (2.41mm)
Contact Length - Mating	0.230" (5.84mm)
Contact Length - Post	0.120" (3.05mm)
Insulation Color	Black
Material Flammability Rating	UL94 V-0
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Fastening Type	Push-Pull
Series	BERGSTIK® II
Shrouding	Unshrouded
Style	Board to Board

Substitute Part Grouping Explanation

Substitution of the 69191-106 is determined by strict equivalence across all mechanical and electrical parameters. The primary substitute identified is the 69191-106HLF, which maintains identical physical dimensions, contact configuration, pitch spacing, and termination method. Both parts are manufactured by Amphenol ICC within the BERGSTIK® II series and share the same base product number (69191).

The substitution logic is based on the following key parameters that must remain constant:

6-position, single-row configuration at 0.100" (2.54mm) pitch
Through-hole, right-angle mounting with kinked pin solder termination
Square contact geometry with phosphor bronze material
Gold or Gold, GXT™ mating surface finish at 30.0µin thickness
0.230" (5.84mm) mating contact length and 0.120" (3.05mm) post length
0.095" (2.41mm) insulation height with black insulation color
UL94 V-0 flammability rating and MSL 1 moisture sensitivity

Differences between the main part and substitute are limited to compliance certifications and operational temperature specifications, which do not affect mechanical interchangeability.

Parameter Comparison

Parameter	69191-106	69191-106HLF
Manufacturer	Amphenol ICC (FCI)	Amphenol ICC (FCI)
Series	BERGSTIK® II	BERGSTIK® II
Connector Type	Header	Header
Contact Type	Male Pin	Male Pin
Number of Positions	6	6
Number of Rows	1	1
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Kinked Pin, Solder	Kinked Pin, Solder
Contact Shape	Square	Square
Contact Material	Phosphor Bronze	Phosphor Bronze
Contact Finish - Mating	Gold or Gold, GXT™	Gold or Gold, GXT™
Contact Finish Thickness - Mating	30.0µin (0.76µm)	30.0µin (0.76µm)
Insulation Height	0.095" (2.41mm)	0.095" (2.41mm)
Contact Length - Mating	0.230" (5.84mm)	0.230" (5.84mm)
Contact Length - Post	0.120" (3.05mm)	0.120" (3.05mm)
Insulation Color	Black	Black
Material Flammability Rating	UL94 V-0	UL94 V-0
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)
Fastening Type	Push-Pull	Push-Pull
Shrouding	Unshrouded	Unshrouded
Style	Board to Board	Board to Board
Product Status	Active	Active
RoHS Status	RoHS non-compliant	RoHS Compliant
Operating Temperature	Not specified	-65°C ~ 125°C
Current Rating (Amps)	Not specified	3A
Inventory	907 Pcs New Original In Stock	946 Pcs New Original In Stock

Engineering Selection Recommendations

Both the 69191-106 and 69191-106HLF are active production parts from Amphenol ICC with identical mechanical and electrical interfaces. Selection between these parts depends on compliance requirements and operational specifications.

The 69191-106HLF is the preferred choice for applications requiring RoHS compliance, as it meets RoHS standards while the 69191-106 does not. The 69191-106HLF also provides documented operating temperature range (-65°C ~ 125°C) and current rating (3A), which are not specified for the 69191-106. Both parts maintain identical physical dimensions and contact configurations, ensuring direct mechanical and electrical interchangeability in board-to-board applications.

Frequently Asked Questions (FAQ)

Q: Are the 69191-106 and 69191-106HLF mechanically interchangeable?

A: Yes. Both parts share identical dimensions, pitch spacing (0.100" / 2.54mm), contact geometry, and mounting configuration. They are direct mechanical substitutes for through-hole, right-angle board-to-board applications.

Q: What is the primary difference between these two parts?

A: The 69191-106HLF is RoHS compliant, while the 69191-106 is not. Additionally, the 69191-106HLF provides specified operating temperature range (-65°C ~ 125°C) and current rating (3A).

Q: Can I use the 69191-106HLF in place of the 69191-106?

A: Yes, provided your application does not have specific requirements that depend on the non-compliant status of the original part. The 69191-106HLF is electrically and mechanically equivalent.

Q: What does the "HLF" suffix indicate?

A: The "HLF" suffix indicates RoHS compliance and the inclusion of specified operational parameters (temperature range and current rating) for this variant within the BERGSTIK® II series.

Q: Are both parts suitable for solder termination?

A: Yes. Both parts feature kinked pin solder termination and are designed for through-hole PCB assembly.

Q: What is the pitch spacing for these connectors?

A: Both parts operate at 0.100" (2.54mm) pitch spacing, which is the standard spacing for this connector family.

Q: Do these parts require any special handling?

A: Both parts have MSL 1 (Unlimited) moisture sensitivity level, indicating no special moisture control measures are required during storage or handling.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message