Amphenol ICC 69190-608 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 69190-608 is an 8-position rectangular connector header from the BERGSTIK® II series, designed for through-hole board-to-board applications with 0.100" (2.54mm) pitch spacing. This connector features male pins with gold-plated mating contacts and press-fit/solder termination options. The part is currently active in production with 1020 units in stock.

Equivalent and substitute parts are necessary when the primary part experiences supply constraints, when design requirements call for alternative contact post lengths, or when compliance specifications differ between manufacturing batches or procurement cycles.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Number of Positions	8
Pitch - Mating	0.100" (2.54mm)
Number of Rows	1
Mounting Type	Through Hole
Termination	Press-Fit, Solder
Contact Length - Mating	0.230" (5.84mm)
Contact Length - Post	0.120" (3.05mm)
Insulation Height	0.100" (2.54mm)
Contact Shape	Square
Contact Finish - Mating	Gold or Gold, GXT™
Contact Material	Phosphor Bronze
Material Flammability Rating	UL94 V-0
Insulation Color	Black
RoHS Status	RoHS non-compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the 69190-608 is determined by strict adherence to the following core parameters:

Critical Parameters (Must Match):

Number of positions: 8
Pitch - mating: 0.100" (2.54mm)
Number of rows: 1
Connector type: Header
Contact type: Male Pin
Mounting type: Through Hole
Contact shape: Square
Material flammability rating: UL94 V-0

Variable Parameters (Allowed Variance):

Contact length - post: Acceptable range 0.100" to 0.700" (2.54mm to 17.78mm)
Contact finish - mating: Gold acceptable in all variants
Contact finish thickness - mating: 3.00µin to 30.0µin (0.076µm to 0.76µm)
Termination: Solder acceptable; press-fit optional
Insulation material: PBT, LCP acceptable
Insulation color: Black or Natural acceptable
Operating temperature: -40°C to 125°C acceptable
RoHS compliance: Both compliant and non-compliant acceptable for substitution purposes

The substitute parts listed below meet all critical parameters and fall within acceptable variance for variable parameters.

Parameter Comparison

Parameter	69190-608 (Main)	929450-01-08-I	HTSW-108-07-G-S	HTSW-108-07-S-S	TS-108-G-AA	TSW-108-07-F-S	TSW-108-08-F-S	TSW-108-09-G-S	TSW-108-12-G-S	TSW-108-23-F-S
Manufacturer	Amphenol ICC	3M	Samtec Inc.	Samtec Inc.	Samtec Inc.	Samtec Inc.	Samtec Inc.	Samtec Inc.	Samtec Inc.	Samtec Inc.
Number of Positions	8	8	8	8	8	8	8	8	8	8
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Number of Rows	1	1	1	1	1	1	1	1	1	1
Connector Type	Header	Header, Breakaway	Header	Header	Header	Header	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Press-Fit, Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Contact Length - Mating	0.230" (5.84mm)	0.295" (7.49mm)	0.230" (5.84mm)	0.230" (5.84mm)	Not specified	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)	0.230" (5.84mm)
Contact Length - Post	0.120" (3.05mm)	0.130" (3.30mm)	0.100" (2.54mm)	0.100" (2.54mm)	Not specified	0.100" (2.54mm)	0.200" (5.08mm)	0.400" (10.16mm)	0.700" (17.78mm)	0.115" (2.92mm)
Insulation Height	0.100" (2.54mm)	0.110" (2.79mm)	0.100" (2.54mm)	0.100" (2.54mm)	Not specified	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Contact Shape	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Contact Finish - Mating	Gold or Gold, GXT™	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold
Contact Material	Phosphor Bronze	Copper Alloy	Phosphor Bronze	Phosphor Bronze	Not specified	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Insulation Color	Black	Black	Natural	Natural	Black	Black	Black	Black	Black	Black
Operating Temperature	Not specified	-40°C ~ 105°C	-55°C ~ 125°C	-55°C ~ 125°C	Not specified	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C
RoHS Status	RoHS non-compliant	REACH Unaffected	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

All listed substitute parts maintain active product status and meet the core electrical and mechanical specifications required for 8-position, 0.100" pitch through-hole header applications.

For RoHS3 Compliance Requirements: The Samtec TSW and HTSW series parts (TSW-108-07-F-S, TSW-108-08-F-S, TSW-108-09-G-S, TSW-108-12-G-S, TSW-108-23-F-S, HTSW-108-07-G-S, HTSW-108-07-S-S) and TS-108-G-AA are ROHS3 compliant, whereas the primary 69190-608 and 929450-01-08-I are non-compliant or unaffected by REACH.

For Extended Temperature Range: Samtec parts and the 3M 929450-01-08-I support operating temperatures from -40°C to 125°C, providing broader thermal performance than the primary part specification.

For Contact Post Length Variations: The TSW series offers multiple post length options (0.100" to 0.700") to accommodate different PCB thicknesses and application requirements. The HTSW-108-07-G-S and HTSW-108-07-S-S maintain the closest dimensional match to the primary part at 0.100" post length.

For Inventory Availability: The HTSW-108-07-G-S (5425 units), TSW-108-12-G-S (1686 units), and TSW-108-09-G-S (1486 units) offer the highest stock levels among substitute options.

Frequently Asked Questions (FAQ)

Q: Can TSW-108-12-G-S be used as a direct replacement for 69190-608?

A: Yes. Both parts share identical mating pitch (0.100"), position count (8), connector type (header), contact type (male pin), mounting method (through hole), and contact shape (square). The primary difference is contact post length: TSW-108-12-G-S features 0.700" posts versus 0.120" on the 69190-608. This difference requires PCB design verification to ensure proper seating depth and mechanical clearance.

Q: What is the difference between HTSW-108-07-G-S and HTSW-108-07-S-S?

A: Both parts are identical except for contact finish on the post. HTSW-108-07-G-S has gold-plated posts (10.0µin thickness), while HTSW-108-07-S-S has tin-plated posts. The mating contact finish (gold) is identical on both. Selection depends on soldering process compatibility and post corrosion resistance requirements.

Q: Is the 929450-01-08-I from 3M compatible with the 69190-608 footprint?

A: The 929450-01-08-I is mechanically compatible for board-to-board connection at 0.100" pitch with 8 positions. However, the insulation height is 0.110" (2.79mm) versus 0.100" (2.54mm) on the 69190-608, and the contact post length is 0.130" (3.30mm) versus 0.120" (3.05mm). These minor dimensional variations may require PCB layout adjustment.

Q: Why do Samtec TSW parts have different post lengths (TSW-108-07-F-S through TSW-108-23-F-S)?

A: The numeric suffix in the part number indicates post length. TSW-108-07-F-S has 0.100" posts, TSW-108-08-F-S has 0.200" posts, TSW-108-09-G-S has 0.400" posts, TSW-108-12-G-S has 0.700" posts, and TSW-108-23-F-S has 0.115" posts. Selection is based on PCB thickness and application depth requirements.

Q: Are all substitute parts UL94 V-0 rated?

A: Yes. All listed substitute parts carry UL94 V-0 material flammability rating, matching the primary 69190-608 specification.

Q: What is the difference between press-fit and solder termination on the 69190-608?

A: The 69190-608 supports both press-fit and solder termination methods. All listed substitute parts support solder termination only. Press-fit termination is not available on the substitute options and requires alternative part selection if this feature is mandatory.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message