Amphenol ICC 69190-514 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 69190-514 is a rectangular connector header from the BERGSTIK® II series, designed for through-hole mounting with 14 positions at 0.100" (2.54mm) pitch. This unshrouded, male pin header connector is specified for board-to-board applications with press-fit and solder termination options. The part is currently active in production and maintains UL94 V-0 material flammability rating with RoHS non-compliant status.

Equivalent and substitute parts are identified based on matching core electrical and mechanical parameters: 14-position configuration, 0.100" (2.54mm) pitch, through-hole mounting, square contact geometry, phosphor bronze material, and UL94 V-0 insulation rating. Substitutes may vary in contact finish specifications, post length, termination method, and compliance certifications while maintaining functional compatibility.

Substiute Parts

69190-514

Amphenol ICC (FCI)In Stock: 108569190-514 Datasheet

Current PartRFQ

PBC14SAAN

Sullins Connector SolutionsIn Stock: 3233PBC14SAAN Datasheet

MFR RecommendedRFQ

PEC14SAAN

Sullins Connector SolutionsIn Stock: 2624PEC14SAAN Datasheet

MFR RecommendedRFQ

PEC14SADN

Sullins Connector SolutionsIn Stock: 1291PEC14SADN Datasheet

MFR RecommendedRFQ

PEC14SAGN

Sullins Connector SolutionsIn Stock: 1202PEC14SAGN Datasheet

MFR RecommendedRFQ

TSW-114-07-S-S-LL

Samtec Inc.In Stock: 801TSW-114-07-S-S-LL Datasheet

MFR RecommendedRFQ

TSW-114-08-L-S-003

Samtec Inc.In Stock: 1148TSW-114-08-L-S-003 Datasheet

MFR RecommendedRFQ

TSW-114-08-L-S-LL

Samtec Inc.In Stock: 1011TSW-114-08-L-S-LL Datasheet

MFR RecommendedRFQ

TSW-114-23-L-S-003

Samtec Inc.In Stock: 979TSW-114-23-L-S-003 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict adherence to the following core parameters:

• 14-position configuration with single row layout
• 0.100" (2.54mm) mating pitch
• Through-hole mounting technology
• 0.230" (5.84mm) mating contact length
• Square contact geometry
• Phosphor bronze contact material
• UL94 V-0 insulation material rating
• Push-pull fastening mechanism
• Black insulation color

Substitute parts are grouped into two categories based on post length variation:

Category A (Standard Post Length): PBC14SAAN, PEC14SAAN, TSW-114-07-S-S-LL, TSW-114-23-L-S-003 maintain post lengths between 0.100" (2.54mm) and 0.200" (5.08mm), providing compatibility with standard PCB through-hole spacing.

Category B (Extended Post Length): PEC14SADN and PEC14SAGN feature extended post lengths of 0.420" (10.67mm) and 0.720" (18.29mm) respectively, accommodating applications requiring deeper board penetration or stacked configurations.

Parameter Comparison

Engineering Selection Recommendations

Direct Substitutes (Standard Post Length):

PBC14SAAN and PEC14SAAN from Sullins Connector Solutions provide direct functional equivalence with 0.120" post length matching the 69190-514 specification. Both parts are ROHS3 compliant with active product status. PBC14SAAN features gold mating contact finish with 10.0µin thickness, while PEC14SAAN uses tin finish with 100.0µin thickness. Selection between these depends on contact finish requirements for your application.

TSW-114-07-S-S-LL and TSW-114-23-L-S-003 from Samtec Inc. offer alternative configurations with kinked pin termination and gold mating contact finish. TSW-114-07-S-S-LL maintains 0.100" post length with all 14 positions loaded. TSW-114-23-L-S-003 features 0.115" post length with 13 positions loaded. Both are ROHS3 compliant with operating temperature range of -55°C ~ 125°C.

Extended Post Length Alternatives:

PEC14SADN and PEC14SAGN accommodate applications requiring deeper PCB penetration with post lengths of 0.420" and 0.720" respectively. Both maintain tin mating contact finish, ROHS3 compliance, and -65°C ~ 125°C operating temperature range. These parts are suitable for stacked connector configurations or applications with thicker substrate materials.

Compliance Considerations:

All substitute parts achieve ROHS3 compliance, whereas the 69190-514 is RoHS non-compliant. Applications subject to RoHS directives require selection from the substitute list. Samtec parts maintain MSL rating of 1 (Unlimited) consistent with the original part, while Sullins parts are rated as Not Applicable for moisture sensitivity.

Frequently Asked Questions (FAQ)

Q: Can PEC14SADN or PEC14SAGN be used as direct replacements for the 69190-514?

A: PEC14SADN and PEC14SAGN maintain all critical electrical and mechanical parameters including 14-position configuration, 0.100" pitch, and 0.230" mating contact length. However, their extended post lengths (0.420" and 0.720" respectively) differ from the 69190-514 specification of 0.120". These parts are suitable only for applications where extended post length is acceptable or required.

Q: What is the difference between gold and tin contact finishes in these headers?

A: Contact finish affects corrosion resistance and mating force characteristics. Gold-finished contacts (69190-514, PBC14SAAN, TSW series) provide superior corrosion resistance and lower contact resistance. Tin-finished contacts (PEC14SAAN, PEC14SADN, PEC14SAGN) offer cost efficiency and are suitable for standard industrial applications. Selection depends on environmental exposure and electrical performance requirements.

Q: Are Samtec TSW-114 series parts fully compatible with the 69190-514?

A: TSW-114 series parts match the core 14-position, 0.100" pitch, and 0.230" mating contact length specifications. Differences include kinked pin termination in some variants, post lengths ranging from 0.100" to 0.200", and operating temperature range of -55°C ~ 125°C versus unspecified for the original part. Verify post length and termination method compatibility with your PCB design before selection.

Q: What does "Number of Positions Loaded" mean in the TSW-114-08-L-S-003 specification?

A: TSW-114-08-L-S-003 is loaded with 13 of 14 available positions, meaning one position contact is omitted. This configuration is suitable for applications requiring a keying or alignment feature. The 69190-514 and most other substitutes are fully loaded with all 14 positions.

Q: Which substitute offers the best RoHS compliance and environmental performance?

A: All substitute parts listed (PBC14SAAN, PEC14SAAN, PEC14SADN, PEC14SAGN, and TSW series) are ROHS3 compliant. Sullins parts (PEC series) offer extended operating temperature range of -65°C ~ 125°C compared to Samtec parts at -55°C ~ 125°C. For applications requiring maximum environmental performance, PEC14SAAN with standard post length provides optimal compliance and temperature range.

Q: Can I mix different substitute parts in the same assembly?

A: While all listed substitutes share core electrical and mechanical compatibility, mixing different manufacturers or post length variants in the same assembly is not recommended. Maintain consistency within a single design to ensure uniform mechanical fit, contact performance, and thermal characteristics across all connector positions.