Amphenol ICC 69155-440R Rectangular Connector - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 69155-440R is a through-hole, right-angle rectangular connector header with 40 positions arranged in 2 rows at 0.100" (2.54mm) pitch. This connector is part of the Quickie™ series and is designed for board-to-board or cable interconnection applications. The part is currently active in production with 933 units in stock.

Substitute parts become necessary when the primary part experiences supply constraints, extended lead times, or when design requirements allow for compatible alternatives that meet the same electrical and mechanical specifications. The parts listed below maintain functional equivalence based on matching core parameters: 40-position configuration, 2.54mm pitch, through-hole right-angle mounting, shrouded 4-wall design, and male pin contact type.

Substiute Parts

69155-440R

Amphenol ICC (FCI)In Stock: 98269155-440R Datasheet

Current PartRFQ

09185406323

HARTINGIn Stock: 85909185406323 Datasheet

MFR RecommendedRFQ

09185407323

HARTINGIn Stock: 108509185407323 Datasheet

MFR RecommendedRFQ

3-1761605-3

TE Connectivity AMP ConnectorsIn Stock: 19683-1761605-3 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 69155-440R is determined by strict adherence to the following core parameters:

• Connector Configuration: 40 positions, 2 rows, 0.100" (2.54mm) pitch, 0.100" row spacing
• Mounting & Style: Through-hole, right-angle orientation, shrouded 4-wall design
• Contact Specifications: Male pin type, square contact shape, gold mating finish
• Electrical & Material Properties: UL94 V-0 flammability rating, MSL 1 classification

The three substitute parts listed below—HARTING 09185406323, HARTING 09185407323, and TE Connectivity 3-1761605-3—meet all these core requirements. Variations in contact length, insulation height, contact material composition, and operating temperature ranges do not preclude substitution, as these parameters fall within acceptable tolerances for this connector category and do not affect the primary mating interface or board-level compatibility.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts maintain active product status and meet the core mechanical and electrical interface requirements of the 69155-440R. Selection among these alternatives should be based on the following factors:

HARTING 09185406323 and 09185407323: Both parts are ROHS3 compliant and offer extended operating temperature range (-55°C to 125°C). These parts are functionally identical and differ only in inventory availability (761 and 1040 units respectively). The HARTING SEK series uses copper alloy contacts and PBT insulation material, which differ from the original design but remain compatible for standard board-level applications.

TE Connectivity 3-1761605-3: This part maintains the same contact material (phosphor bronze) and insulation material composition (PBT) as the original, with ROHS3 compliance. It provides specified voltage rating (250VAC) and current rating (1A per contact), matching the original electrical performance. Operating temperature range is -65°C to 105°C. This part offers the highest inventory availability (1894 units).

The original 69155-440R is RoHS non-compliant. If RoHS compliance is a design requirement, all three substitute parts satisfy this criterion.

Frequently Asked Questions (FAQ)

Q: Can I use HARTING 09185406323 or 09185407323 as a direct replacement for the Amphenol ICC 69155-440R?

A: Yes. Both HARTING parts maintain the same 40-position, 2-row configuration at 0.100" pitch, through-hole right-angle mounting, and shrouded 4-wall design. Minor variations in contact length (0.242" vs. 0.230" mating contact) and insulation height (0.366" vs. 0.331") fall within acceptable mechanical tolerances for this connector category and do not affect board-level compatibility or mating interface performance.

Q: What is the difference between HARTING 09185406323 and 09185407323?

A: These parts are electrically and mechanically identical. Both are from the HARTING SEK series with the same specifications. The difference is inventory availability: 09185406323 has 761 units in stock, while 09185407323 has 1040 units in stock.

Q: Is the TE Connectivity 3-1761605-3 compatible with the original 69155-440R?

A: Yes. The TE Connectivity part maintains the same core configuration, pitch, mounting style, and shrouding. It uses phosphor bronze contacts (matching the original) and provides specified electrical ratings (1A per contact, 250VAC). Operating temperature range is -65°C to 105°C, which covers most standard industrial applications.

Q: Do these substitute parts have different RoHS compliance status?

A: Yes. The original 69155-440R is RoHS non-compliant. All three substitute parts—HARTING 09185406323, HARTING 09185407323, and TE Connectivity 3-1761605-3—are ROHS3 compliant. If your application requires RoHS compliance, any of these substitutes is suitable.

Q: What are the key parameters that determine if a connector can substitute for the 69155-440R?

A: The critical parameters are: 40-position configuration, 2 rows, 0.100" (2.54mm) pitch, 0.100" row spacing, through-hole right-angle mounting, shrouded 4-wall design, male pin contacts, square contact shape, and gold mating finish. All listed substitutes meet these requirements.

Q: Can I mix and match these substitute parts in the same design?

A: Yes. All three substitute parts are mechanically and electrically compatible with each other and with the original 69155-440R. They can be used interchangeably in the same application without design modification.

Q: What is the difference in contact material between these parts?

A: The original 69155-440R and TE Connectivity 3-1761605-3 use phosphor bronze contacts. The HARTING 09185406323 and 09185407323 use copper alloy contacts. Both materials provide equivalent electrical performance and contact reliability for standard board-level applications.

Q: Are there any temperature range limitations I should consider?

A: The original 69155-440R does not specify an operating temperature range. The HARTING parts operate from -55°C to 125°C, and the TE Connectivity part operates from -65°C to 105°C. If your application requires operation outside these ranges, verify compatibility with the original design specifications.