Amphenol ICC 69155-240 Rectangular Connector Header - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 69155-240 is a through-hole, right-angle rectangular connector header with 40 positions arranged in 2 rows at 0.100" (2.54mm) pitch. This shrouded, 4-wall header connector is designed for board-to-board or cable applications with solder termination and push-pull fastening. The part is currently active in production with 1043 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling component interchangeability in applications where the primary part becomes unavailable or when design requirements necessitate alternative connector series.

Substiute Parts

69155-240

Amphenol ICC (FCI)In Stock: 113669155-240 Datasheet

Current PartRFQ

09185406323

HARTINGIn Stock: 85909185406323 Datasheet

MFR RecommendedRFQ

09185407323

HARTINGIn Stock: 108509185407323 Datasheet

MFR RecommendedRFQ

3-1761605-3

TE Connectivity AMP ConnectorsIn Stock: 19683-1761605-3 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 69155-240 is determined by strict alignment of the following critical parameters:

• Connector Type & Contact Configuration: Header with male pins
• Position Count & Row Configuration: 40 positions in 2 rows
• Pitch Specification: 0.100" (2.54mm) mating pitch and row spacing
• Mounting & Orientation: Through-hole, right-angle mounting
• Shrouding Design: Shrouded with 4-wall construction
• Termination Method: Solder termination
• Contact Finish: Gold plating on mating surfaces
• Flammability Compliance: UL94 V-0 rating
• Moisture Sensitivity: MSL 1 classification

The three identified substitute parts—HARTING 09185406323, HARTING 09185407323, and TE Connectivity 3-1761605-3—meet these core electrical and mechanical requirements. Variations in contact shape (circular vs. square), insulation material composition, fastening mechanism (push-pull vs. latch holder), and operating temperature ranges represent secondary design differences that do not preclude functional substitution when the primary part is unavailable.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts maintain active product status and satisfy the core electrical and mechanical requirements of the 69155-240. Selection between substitutes should be based on the following compliance and certification factors:

RoHS Compliance: The HARTING 09185406323, HARTING 09185407323, and TE Connectivity 3-1761605-3 are all ROHS3 compliant, whereas the original 69155-240 is RoHS non-compliant. Applications subject to RoHS directives must use one of the three substitute parts.

REACH Status: The HARTING parts (09185406323 and 09185407323) are REACH Unaffected, while the TE Connectivity 3-1761605-3 has undefined REACH status. The original 69155-240 is REACH Affected. Applications requiring REACH compliance should prioritize the HARTING substitutes.

Operating Temperature Range: The HARTING parts support -55°C to 125°C operation, while the TE Connectivity part supports -65°C to 105°C. The original part does not specify an operating temperature range. Applications requiring extended low-temperature performance should use the TE Connectivity substitute.

Fastening Mechanism: The original 69155-240 and TE Connectivity 3-1761605-3 use push-pull fastening, while the HARTING parts use latch holder fastening. Applications with existing mating connectors designed for push-pull engagement should prioritize the TE Connectivity substitute.

Current Rating: The original 69155-240 and TE Connectivity 3-1761605-3 specify 1A per contact, while the HARTING parts do not specify current rating. Applications with defined current requirements should use the TE Connectivity substitute or the original part.

Frequently Asked Questions (FAQ)

Q: Can the HARTING 09185406323 and 09185407323 be used interchangeably with the Amphenol ICC 69155-240?

A: Both HARTING parts meet the core electrical and mechanical specifications of the 69155-240, including 40-position, 2-row configuration at 0.100" pitch, through-hole right-angle mounting, solder termination, and gold-plated mating contacts. The primary differences are fastening mechanism (latch holder vs. push-pull), contact shape (square vs. circular), and insulation material (PBT vs. polyester). Substitution is electrically and mechanically valid when the mating connector is compatible with latch holder fastening.

Q: What is the difference between the two HARTING substitute parts (09185406323 and 09185407323)?

A: Both HARTING parts are identical in electrical and mechanical specifications. They share the same series designation (SEK), position count, pitch, mounting type, shrouding, and termination method. The part numbers differ, but the technical parameters provided indicate no functional distinction between them.

Q: Is the TE Connectivity 3-1761605-3 a direct replacement for the 69155-240?

A: The TE Connectivity 3-1761605-3 is functionally equivalent to the 69155-240 in terms of position count, pitch, mounting orientation, and fastening mechanism (both use push-pull). Both parts specify 1A per contact current rating. The TE Connectivity part offers ROHS3 compliance and a defined operating temperature range of -65°C to 105°C. Contact shape differs (square vs. circular), and insulation material composition varies (PBT vs. polyester), but these do not preclude substitution.

Q: Which substitute part should be selected for RoHS-compliant applications?

A: All three substitute parts—HARTING 09185406323, HARTING 09185407323, and TE Connectivity 3-1761605-3—are ROHS3 compliant. The original Amphenol ICC 69155-240 is RoHS non-compliant and cannot be used in applications requiring RoHS compliance.

Q: Are there inventory considerations when selecting a substitute?

A: Current inventory levels are: Amphenol ICC 69155-240 (1043 units), HARTING 09185406323 (761 units), HARTING 09185407323 (1040 units), and TE Connectivity 3-1761605-3 (1894 units). The TE Connectivity part has the highest available stock.

Q: What is the significance of the contact shape difference (circular vs. square)?

A: Contact shape affects mechanical engagement characteristics and contact pressure distribution. The original 69155-240 uses circular contacts, while all three substitutes use square contacts. This difference does not affect electrical performance but may influence mechanical fit and retention force with mating connectors. Compatibility should be confirmed with the specific mating connector design.

Q: Do all substitute parts support the same current rating as the original?

A: The original 69155-240 and TE Connectivity 3-1761605-3 both specify 1A per contact. The HARTING parts (09185406323 and 09185407323) do not provide a current rating specification in the available data. Applications with defined current requirements should use the TE Connectivity substitute or confirm HARTING specifications with the manufacturer.