Amphenol ICC 69155-134 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 69155-134 is a rectangular connector header featuring a right-angle, through-hole configuration with 34 positions at 2.54mm pitch. This component is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support and new design implementations. The Quickie™ series connector provides board-to-board or cable connectivity with shrouded 4-wall construction and push-pull fastening.

Substiute Parts

69155-134

Amphenol ICC (FCI)In Stock: 80569155-134 Datasheet

Current PartRFQ

3-1761605-1

TE Connectivity AMP ConnectorsIn Stock: 30203-1761605-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The TE Connectivity AMP Connectors part number 3-1761605-1 qualifies as a direct substitute based on the following critical parameters:

• Identical connector type (Header) and contact type (Male Pin)
• Matching position count (34) and row configuration (2 rows)
• Identical mating pitch (0.100" / 2.54mm) and row spacing (0.100" / 2.54mm)
• Equivalent mounting configuration (Through Hole, Right Angle)
• Matching shrouding design (Shrouded - 4 Wall)
• Identical fastening mechanism (Push-Pull)
• Equivalent termination method (Solder)
• Matching current rating (1A per contact)
• Identical flammability rating (UL94 V-0)

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity 3-1761605-1 is the primary substitute for the obsolete Amphenol ICC 69155-134. Selection of this alternative is supported by:

• Active product status ensuring continued availability and supply chain stability
• ROHS3 compliance, providing regulatory advantage over the non-compliant original part
• Identical electrical and mechanical specifications for all critical mating parameters
• Equivalent current and flammability ratings
• Documented operating temperature range (-65°C ~ 105°C) and voltage rating (250VAC) providing additional specification clarity

Minor dimensional variations exist in contact length and insulation height; however, these differences remain within acceptable tolerances for standard through-hole board-to-board and board-to-cable applications. The transition from circular to square contact geometry does not affect functional compatibility in standard connector applications.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 3-1761605-1 directly replace the Amphenol ICC 69155-134 in existing designs?

A: Yes. Both connectors share identical mating pitch (2.54mm), position count (34), row configuration (2 rows), mounting type (through-hole right-angle), and fastening mechanism (push-pull). The connectors are mechanically and electrically compatible for standard board-to-board and board-to-cable applications.

Q: What are the key differences between these two connectors?

A: The primary differences are product status (obsolete vs. active), insulation material (polyester glass-filled vs. PBT), contact shape (circular vs. square), and regulatory compliance (RoHS non-compliant vs. ROHS3 compliant). Contact length and insulation height show minor dimensional variations that do not affect standard connector operation.

Q: Are there any compatibility concerns with the contact shape difference?

A: No. The transition from circular to square contact geometry does not impact mating compatibility or electrical performance in standard connector applications. Both contact shapes provide equivalent contact pressure and current-carrying capacity at the specified 1A rating.

Q: What is the advantage of selecting the TE Connectivity substitute?

A: The TE Connectivity 3-1761605-1 offers active product status, ensuring long-term availability and supply chain continuity. Additionally, ROHS3 compliance provides regulatory advantage for applications subject to environmental restrictions.

Q: Are the operating temperature and voltage specifications of the substitute relevant to the original part?

A: The TE Connectivity substitute provides documented operating temperature (-65°C ~ 105°C) and voltage rating (250VAC). These specifications define the operational envelope for the substitute. If the original application did not specify these parameters, the substitute's ratings provide a defined performance baseline suitable for most industrial and commercial connector applications.

Q: What is the packaging difference between these connectors?

A: The original part is listed with unspecified packaging, while the substitute is supplied in bulk packaging. Bulk packaging is standard for connector distribution and does not affect component functionality or performance.