Amphenol ICC 69133-108HLF Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 69133-108HLF is an active rectangular connector header designed for through-hole board-to-board applications. This 8-position, 2-row vertical header operates across a wide temperature range (-65°C to 130°C) and is certified RoHS Compliant with UL94 V-0 flammability rating. Finding equivalent substitute parts becomes necessary when managing inventory constraints, lead time requirements, or when sourcing from alternative manufacturers while maintaining electrical and mechanical compatibility.

Substiute Parts

69133-108HLF

Amphenol ICC (FCI)In Stock: 119769133-108HLF Datasheet

Current PartRFQ

450-10-208-00-001101

Preci-DipIn Stock: 1759450-10-208-00-001101 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 69133-108HLF is determined by strict alignment of core electrical and mechanical parameters. The substitute part must maintain:

• Identical connector type (Header) and contact type (Male Pin)
• Matching position count (8) and row configuration (2 rows)
• Identical mating pitch (0.100" / 2.54mm) and row spacing (0.100" / 2.54mm)
• Same mounting method (Through Hole) and termination type (Solder)
• Equivalent or superior current rating (3A minimum)
• Compatible operating temperature range
• Equivalent flammability certification (UL94 V-0)
• RoHS compliance status

The Preci-Dip 450-10-208-00-001101 meets these substitution criteria as a manufacturer-recommended equivalent.

Parameter Comparison

Engineering Selection Recommendations

The Preci-Dip 450-10-208-00-001101 is a qualified substitute for the Amphenol ICC 69133-108HLF based on matching core electrical and mechanical specifications. Both parts are active products with current inventory availability and equivalent compliance certifications (UL94 V-0, RoHS). The Preci-Dip part carries ROHS3 Compliant status, which supersedes the standard RoHS Compliant designation of the Amphenol part, providing enhanced regulatory alignment.

The operating temperature range of the Preci-Dip part (-55°C ~ 125°C) is narrower than the Amphenol part (-65°C ~ 130°C). Applications requiring operation below -55°C or above 125°C must use the Amphenol ICC 69133-108HLF to ensure compliance with temperature specifications.

Frequently Asked Questions (FAQ)

Q: Can the Preci-Dip 450-10-208-00-001101 be used as a direct replacement for the Amphenol ICC 69133-108HLF?

A: Yes, for applications operating within the -55°C to 125°C temperature range. Both parts share identical mating pitch (2.54mm), position count (8), row configuration (2), current rating (3A), and flammability certification (UL94 V-0). The Amphenol part must be used if your application requires operation outside the Preci-Dip temperature range.

Q: What are the key differences between these two parts?

A: The primary differences are contact geometry (Square vs. Circular), contact material (Phosphor Bronze vs. Brass), insulation material composition, contact finish thickness, and operating temperature range. The Preci-Dip part has a narrower temperature specification and different contact dimensions, but maintains electrical compatibility for standard applications.

Q: Are both parts RoHS compliant?

A: Yes. The Amphenol ICC 69133-108HLF is RoHS Compliant, and the Preci-Dip 450-10-208-00-001101 is ROHS3 Compliant. ROHS3 represents an updated compliance standard and is acceptable for applications requiring RoHS certification.

Q: What packaging differences exist between these parts?

A: The Amphenol ICC 69133-108HLF is supplied in Bag packaging, while the Preci-Dip 450-10-208-00-001101 is supplied in Bulk packaging. Packaging format does not affect electrical or mechanical compatibility.

Q: Can I use the Preci-Dip part in applications requiring the full -65°C to 130°C temperature range?

A: No. The Preci-Dip part is rated only to -55°C minimum and 125°C maximum. For applications requiring the extended temperature range of the Amphenol part, use the Amphenol ICC 69133-108HLF.