TE Connectivity AMP Connectors 6-87160-0 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 6-87160-0 is an active rectangular connector header designed for through-hole mounting applications. This unshrouded, 9-position connector operates within the AMPMODU Mod I series and features a 0.156" (3.96mm) pitch configuration with male pin contacts. The connector is specified for board-to-board or cable interconnection with solder termination and push-pull fastening. Substitute parts are identified to provide alternative sourcing options when the primary part number becomes unavailable or when inventory constraints require component alternatives that maintain equivalent electrical and mechanical performance.

Substiute Parts

6-87160-0

TE Connectivity AMP ConnectorsIn Stock: 12366-87160-0 Datasheet

Current PartRFQ

FWJ-09-01-T-S

Samtec Inc.In Stock: 1105FWJ-09-01-T-S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of rectangular connector headers is determined by strict alignment of electrical and mechanical parameters. The primary criteria for equivalency include connector type, contact type, number of positions, number of rows, mating pitch, mounting type, termination method, fastening type, and shrouding configuration. Secondary criteria include operating temperature range, material flammability rating, and compliance certifications.

The substitute part FWJ-09-01-T-S from Samtec Inc. is grouped as an equivalent alternative based on the following matching parameters:

• Connector Type: Header
• Contact Type: Male Pin
• Number of Positions: 9
• Number of Rows: 1
• Pitch - Mating: 0.156" (3.96mm)
• Mounting Type: Through Hole
• Termination: Solder
• Fastening Type: Push-Pull
• Shrouding: Unshrouded
• Material Flammability Rating: UL94 V-0
• Moisture Sensitivity Level: 1 (Unlimited)

Parameter Comparison

Engineering Selection Recommendations

Both the TE Connectivity 6-87160-0 and the Samtec FWJ-09-01-T-S are active products with equivalent core connector specifications. Selection between these parts is based on the following engineering considerations:

TE Connectivity 6-87160-0 is specified with an operating temperature range of -65°C to 105°C and a current rating of 5A. This part carries RoHS Compliant certification and is manufactured with brass contact material and thermoplastic insulation.

Samtec FWJ-09-01-T-S operates within a temperature range of -55°C to 105°C and specifies voltage ratings of 600VAC and 845VDC. This part carries ROHS3 Compliant certification and is manufactured with phosphor bronze contact material and polybutylene terephthalate (PBT) insulation.

Both parts meet UL94 V-0 flammability requirements, maintain MSL 1 (Unlimited) moisture sensitivity levels, and share identical ECCN and HTSUS classifications. The selection between these parts depends on application-specific requirements regarding minimum operating temperature, current versus voltage specifications, and material preferences for contact and insulation components.

Frequently Asked Questions (FAQ)

Q: Can the Samtec FWJ-09-01-T-S directly replace the TE Connectivity 6-87160-0 in all applications?

A: Both connectors share identical core specifications for connector type, contact type, number of positions, pitch, mounting type, termination, and fastening. However, differences exist in contact length dimensions, contact material composition, insulation material, and specified electrical ratings. Applications requiring the -65°C minimum operating temperature or the 5A current rating of the TE part require verification that the Samtec part meets these specific requirements. Applications specifying the 600VAC/845VDC voltage ratings of the Samtec part require verification that the TE part meets these requirements.

Q: What are the dimensional differences between these two connectors?

A: The Samtec FWJ-09-01-T-S has longer contact dimensions compared to the TE Connectivity 6-87160-0. The mating contact length is 0.450" (11.43mm) versus 0.405" (10.29mm), the post contact length is 0.175" (4.45mm) versus 0.125" (3.18mm), and the overall contact length is 0.750" (19.05mm) versus 0.655" (16.64mm). The insulation height remains identical at 0.125" (3.18mm) for both parts.

Q: What material differences exist between these connectors?

A: The TE Connectivity 6-87160-0 uses brass contact material with thermoplastic insulation. The Samtec FWJ-09-01-T-S uses phosphor bronze contact material with polybutylene terephthalate (PBT) insulation. Both parts feature tin contact finish on mating and post surfaces.

Q: Are both parts RoHS compliant?

A: Yes. The TE Connectivity 6-87160-0 is RoHS Compliant. The Samtec FWJ-09-01-T-S is ROHS3 Compliant. Both parts meet RoHS requirements.

Q: What is the operating temperature difference between these parts?

A: The TE Connectivity 6-87160-0 operates from -65°C to 105°C. The Samtec FWJ-09-01-T-S operates from -55°C to 105°C. Applications requiring operation below -55°C require the TE part.

Q: What electrical ratings are specified for each connector?

A: The TE Connectivity 6-87160-0 specifies a current rating of 5A with no voltage rating provided. The Samtec FWJ-09-01-T-S specifies voltage ratings of 600VAC and 845VDC with no current rating provided. Application requirements determine which electrical specification is relevant.

Q: Do both connectors have the same moisture sensitivity level?

A: Yes. Both the TE Connectivity 6-87160-0 and the Samtec FWJ-09-01-T-S are classified as MSL 1 (Unlimited), indicating unlimited shelf life without moisture control requirements.

Q: Are both connectors classified under the same export control and tariff codes?

A: Yes. Both parts share identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications.