68683-417 Rectangular Connector Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 68683-417 is a 34-position receptacle connector featuring 0.100" (2.54mm) pitch, through-hole solder termination, and tin-plated contacts. This Dubox™ series connector is designed for board-to-board applications with push-pull fastening and operates across -65°C to 125°C. The part is currently active in production with 682 units in stock.

Equivalent and substitute parts are identified when design requirements permit variations in contact finish, insulation material, or mechanical dimensions while maintaining core electrical and functional compatibility. Substitutes enable procurement flexibility, alternative sourcing, or performance optimization for specific application environments.

Substiute Parts

68683-417

Amphenol ICC (FCI)In Stock: 77268683-417 Datasheet

Current PartRFQ

1-215307-7

TE Connectivity AMP ConnectorsIn Stock: 25901-215307-7 Datasheet

MFR RecommendedRFQ

6-534206-7

TE Connectivity AMP ConnectorsIn Stock: 20696-534206-7 Datasheet

MFR RecommendedRFQ

803-43-034-10-001000

Mill-Max Manufacturing Corp.In Stock: 974803-43-034-10-001000 Datasheet

MFR RecommendedRFQ

BCS-117-L-D-TE-001

Samtec Inc.In Stock: 991BCS-117-L-D-TE-001 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 68683-417 is determined by the following core parameters:

Critical Parameters (Must Match):

• Connector type: Receptacle
• Contact type: Female socket
• Number of positions: 34
• Pitch - mating: 0.100" (2.54mm)
• Number of rows: 2
• Row spacing - mating: 0.100" (2.54mm)
• Mounting type: Through hole
• Termination: Solder
• Fastening type: Push-pull
• Material flammability rating: UL94 V-0

Allowable Variations:

• Contact finish - mating: Tin or gold plating
• Insulation material: PPS, polyester, or LCP
• Insulation height: Within ±0.05" tolerance
• Contact length - post: Within ±0.010" tolerance
• Operating temperature range: Equal or wider range
• Contact material: Phosphor bronze or beryllium copper
• RoHS compliance status: May differ based on application requirements

Four substitute parts meet these criteria across multiple manufacturers, enabling selection based on compliance requirements, availability, or performance specifications.

Parameter Comparison

Engineering Selection Recommendations

1-215307-7 (TE Connectivity AMPMODU HV-100): ROHS3 compliant receptacle with gold-plated mating contacts and kinked pin termination. Identical insulation height and row spacing to the main part. Suitable for applications requiring RoHS compliance and enhanced corrosion resistance through gold plating. Packaging in tray format differs from tube packaging of the main part.

6-534206-7 (TE Connectivity AMPMODU Mod II): RoHS compliant alternative with gold-plated contacts and identical operating temperature range (-65°C to 125°C) to the main part. Insulation height is 0.320" (8.13mm), approximately 0.044" taller than the main part. Rated for 2A per contact. Suitable for applications where increased insulation height is acceptable and RoHS compliance is required.

803-43-034-10-001000 (Mill-Max Manufacturing 803 Series): ROHS3 compliant connector with beryllium copper contacts and gold plating. Rated for 4.5A per contact with higher current capacity than other alternatives. Operating temperature range of -55°C to 125°C is narrower at the lower limit compared to the main part. Moisture sensitivity level is not applicable. Suitable for high-current applications requiring enhanced contact performance.

BCS-117-L-D-TE-001 (Samtec Tiger Claw™ BCS): ROHS3 compliant receptacle with gold-plated contacts and liquid crystal polymer insulation. Rated for 4.6A per contact with 475VAC voltage specification. Operating temperature range is -55°C to 125°C. Only 33 of 34 positions are loaded. Suitable for applications requiring high current density and enhanced mechanical stability through LCP insulation.

Frequently Asked Questions (FAQ)

Q: Can the 68683-417 be directly replaced with any of these substitute parts?

A: Direct mechanical and electrical substitution is possible when the application permits variations in contact finish (tin to gold), insulation material, and minor dimensional differences in insulation height and contact post length. All substitutes maintain the critical 0.100" pitch, 34-position configuration, and push-pull fastening required for board-to-board connectivity.

Q: What is the primary difference between the tin-plated main part and gold-plated substitutes?

A: Contact finish affects corrosion resistance and mating cycle durability. Tin plating provides cost-effective performance in controlled environments. Gold plating offers superior corrosion resistance and is preferred in high-humidity, corrosive, or long-term storage applications. All finishes meet UL94 V-0 flammability requirements.

Q: Are all substitute parts RoHS compliant?

A: The main part 68683-417 is RoHS non-compliant. All four substitute parts are RoHS3 compliant, making them suitable for applications subject to RoHS regulations. Selection depends on whether the application requires RoHS compliance.

Q: What is the significance of the different insulation materials?

A: Insulation material affects thermal stability, chemical resistance, and mechanical properties. PPS (polyphenylene sulfide) offers excellent chemical resistance. Polyester provides cost-effective performance. LCP (liquid crystal polymer) offers superior dimensional stability and mechanical strength. PCT (polycyclohexylene dimethylene terephthalate) combines polyester and polycarbonate properties. Selection depends on environmental exposure and mechanical stress requirements.

Q: How do the operating temperature ranges compare?

A: The main part operates from -65°C to 125°C. Substitutes 803-43-034-10-001000 and BCS-117-L-D-TE-001 operate from -55°C to 125°C, with a narrower lower temperature limit. Substitute 1-215307-7 does not specify an operating temperature range. For applications requiring operation below -55°C, the main part or substitute 6-534206-7 (which matches the -65°C lower limit) are required.

Q: What is the difference between kinked pin and standard solder termination?

A: Standard solder termination uses straight pins for through-hole PCB mounting. Kinked pin termination (used in 1-215307-7) includes a bend in the pin to provide additional mechanical retention and stress relief during soldering. Both methods are compatible with standard PCB assembly processes.

Q: Do all parts support the same current rating?

A: The main part does not specify a current rating. Substitutes provide varying ratings: 1-215307-7 and 6-534206-7 do not specify current ratings, while 803-43-034-10-001000 is rated for 4.5A per contact and BCS-117-L-D-TE-001 is rated for 4.6A per contact. For high-current applications, Mill-Max or Samtec alternatives are recommended.

Q: What packaging differences exist between these parts?

A: The main part 68683-417 is supplied in tube packaging. Substitute 1-215307-7 is supplied in tray packaging, which may affect handling, storage, and automated assembly processes. Substitutes 6-534206-7, 803-43-034-10-001000, and BCS-117-L-D-TE-001 are supplied in tube packaging, matching the main part format.

Q: Can the BCS-117-L-D-TE-001 be used as a direct replacement if only 33 positions are loaded?

A: The BCS-117-L-D-TE-001 has 33 of 34 positions loaded. This part is suitable only for applications that do not require all 34 positions to be populated. For applications requiring all 34 positions, the other three substitutes or the main part are required.