Amphenol ICC 68683-215 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 68683-215 is a 30-position receptacle connector with 0.100" (2.54mm) pitch, designed for board-to-board applications. This connector features gold-plated mating contacts, through-hole solder termination, and push-pull fastening. The part is currently active in production with 849 units in stock. Equivalent and substitute parts are identified for applications requiring alternative sourcing, compliance certifications, or specific performance characteristics within the same connector category.

Substiute Parts

68683-215

Amphenol ICC (FCI)In Stock: 93368683-215 Datasheet

Current PartRFQ

1-215307-5

TE Connectivity AMP ConnectorsIn Stock: 19281-215307-5 Datasheet

MFR RecommendedRFQ

6-534206-5

TE Connectivity AMP ConnectorsIn Stock: 20196-534206-5 Datasheet

MFR RecommendedRFQ

BCS-115-L-D-TE-001

Samtec Inc.In Stock: 1085BCS-115-L-D-TE-001 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 68683-215 is determined by the following critical parameters:

Primary Matching Criteria (Required for Direct Substitution):

• Connector Type: Receptacle
• Contact Type: Female Socket
• Number of Positions: 30
• Pitch - Mating: 0.100" (2.54mm)
• Number of Rows: 2
• Row Spacing - Mating: 0.100" (2.54mm)
• Mounting Type: Through Hole
• Fastening Type: Push-Pull
• Contact Finish - Mating: Gold

Secondary Compatibility Parameters (Allowable Variation):

• Termination: Solder or Kinked Pin with Solder
• Insulation Material: PPS, Polyester, or Liquid Crystal Polymer (LCP), all glass-filled
• Operating Temperature Range: Must encompass or match the application requirement
• Material Flammability Rating: UL94 V-0 (consistent across all parts)
• Contact Finish Thickness - Mating: Variation acceptable within industry standards (10.0µin to 31.5µin)
• Insulation Height: Minor variation acceptable (0.276" to 0.320")
• Contact Length - Post: Minor variation acceptable (0.115" to 0.122")

All three substitute parts meet the primary matching criteria and are electrically and mechanically compatible with the 68683-215 for board-to-board connector applications.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 1-215307-5 (AMPMODU HV-100)

This substitute is suitable for applications where ROHS3 compliance is required. The kinked pin termination option provides alternative assembly flexibility. Higher gold plating thickness (31.5µin) offers enhanced contact durability. Packaging in tray format may require custom handling for tube-based assembly lines. Operating temperature range is not specified; applications requiring -65°C operation should be evaluated against actual performance data.

TE Connectivity 6-534206-5 (AMPMODU Mod II)

This substitute maintains identical operating temperature range (-65°C ~ 125°C) and contact length (0.115") as the original part, minimizing design integration risk. RoHS compliance is available. Slightly increased insulation height (0.320" vs 0.276") requires PCB layout verification. Specified current rating of 2A per contact provides defined electrical performance. Tube packaging matches the original part format.

Samtec BCS-115-L-D-TE-001 (Tiger Claw™ BCS)

This substitute offers the highest current rating (4.6A per contact) and ROHS3 compliance. Liquid Crystal Polymer insulation material provides superior thermal and mechanical properties. Operating temperature minimum is -55°C (5°C higher than original); applications requiring -65°C operation must be evaluated. Voltage rating is specified at 475VAC (lower than the original 1000V); high-voltage applications must confirm compatibility. Number of positions loaded is 29 of 30; applications requiring all 30 positions must be verified.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 1-215307-5 be used as a direct replacement for the Amphenol ICC 68683-215?

A: The 1-215307-5 is electrically and mechanically compatible for board-to-board connector applications. The kinked pin termination is compatible with solder assembly. The primary consideration is packaging format: the 1-215307-5 is supplied in tray format rather than tube, which may require adjustment to assembly line handling procedures. ROHS3 compliance is available with this substitute.

Q: What is the difference between the two TE Connectivity options?

A: The 1-215307-5 (AMPMODU HV-100) features kinked pin termination and higher gold plating (31.5µin), supplied in tray packaging. The 6-534206-5 (AMPMODU Mod II) uses standard solder termination, matches the original contact length, and is supplied in tube packaging. The 6-534206-5 maintains identical operating temperature range to the original part.

Q: Is the Samtec BCS-115-L-D-TE-001 suitable for high-voltage applications?

A: The Samtec part is rated for 475VAC, which is lower than the original part's 1000V rating. Applications requiring 1000V operation must use the original Amphenol ICC 68683-215 or confirm that 475VAC is sufficient for the intended application.

Q: What is the significance of the operating temperature range difference in the Samtec part?

A: The Samtec BCS-115-L-D-TE-001 operates from -55°C to 125°C, while the original part operates from -65°C to 125°C. Applications requiring operation at -65°C must either use the original part or the TE Connectivity 6-534206-5, which matches the original temperature range.

Q: Does the Samtec part have all 30 positions loaded?

A: The Samtec BCS-115-L-D-TE-001 has 29 of 30 positions loaded. Applications requiring all 30 positions must be verified against the specific connector configuration needed.

Q: What are the RoHS compliance differences?

A: The original Amphenol ICC 68683-215 is RoHS non-compliant. All three substitute parts offer RoHS compliance: TE Connectivity 1-215307-5 and Samtec BCS-115-L-D-TE-001 are ROHS3 compliant, while TE Connectivity 6-534206-5 is RoHS compliant. Applications subject to RoHS regulations should select from the substitute parts.

Q: Are there differences in insulation material between the parts?

A: Yes. The original uses Polyphenylene Sulfide (PPS), while the TE Connectivity substitutes use Polyester, and the Samtec substitute uses Liquid Crystal Polymer (LCP). All materials are glass-filled and rated UL94 V-0. Material selection depends on thermal and mechanical requirements specific to the application.

Q: What is the impact of different contact finish thicknesses?

A: Contact finish thickness ranges from 10.0µin (Samtec) to 31.5µin (TE Connectivity 1-215307-5). Thicker plating generally provides longer contact life and improved corrosion resistance. The original part has 15.0µin plating. Selection depends on application cycle life and environmental exposure requirements.