Amphenol ICC 68480-472 Rectangular Connector - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 68480-472 is a through-hole, right-angle rectangular connector header with 72 positions at 2.54mm pitch, part of the BERGSTIK® II series. This connector is designed for board-to-board applications requiring reliable solder termination and push-pull fastening. The product maintains active status with 725 units currently in stock.

Substitute parts become necessary when the primary part reaches end-of-life, inventory constraints occur, or design requirements allow for compatible alternatives that meet the same electrical and mechanical specifications.

Substiute Parts

68480-472

Amphenol ICC (FCI)In Stock: 78568480-472 Datasheet

Current PartRFQ

4-103324-0

TE Connectivity AMP ConnectorsIn Stock: 9724-103324-0 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 68480-472 is determined by the following critical parameters:

• Pitch - Mating: 0.100" (2.54mm) — must match exactly for mechanical compatibility
• Mounting Type: Through Hole, Right Angle — determines PCB layout and assembly process
• Connector Type: Header with Male Pin contacts — defines mating interface
• Termination Method: Solder — ensures compatibility with assembly equipment
• Fastening Type: Push-Pull — maintains functional interface consistency
• Material Flammability Rating: UL94 V-0 — ensures compliance with safety standards

The substitute part 4-103324-0 (TE Connectivity AMP Connectors, AMPMODU Mod II series) shares these critical parameters. However, the substitute differs in position count (80 vs. 72), which represents a higher-capacity alternative suitable for applications where additional contact positions are acceptable or beneficial.

Parameter Comparison

Engineering Selection Recommendations

Primary Part (68480-472): Recommended for new designs and applications requiring active product support. The part maintains active status with established supply chain availability and full manufacturer support.

Substitute Part (4-103324-0): This part carries obsolete product status, indicating discontinued manufacturing and limited future availability. Selection of this substitute should be limited to legacy system maintenance or applications where the higher position count (80 vs. 72) provides functional advantage and where the design can accommodate the increased insulation height (0.238" vs. 0.190").

Both parts comply with UL94 V-0 flammability requirements and maintain identical pitch, mounting type, and termination methods. The contact finish difference (Tin vs. Tin-Lead) reflects manufacturing era differences but does not preclude functional substitution in equivalent applications.

Frequently Asked Questions (FAQ)

Q: Can the 4-103324-0 directly replace the 68480-472 in existing designs?

A: Direct replacement requires design review. Both connectors share identical pitch (2.54mm), mounting type (through-hole right-angle), and termination method (solder). However, the substitute has 80 positions versus 72, and increased insulation height (0.238" vs. 0.190"). PCB layout and clearance verification is necessary.

Q: What is the significance of the position count difference (72 vs. 80)?

A: The 68480-472 provides 72 contact positions in a 2-row configuration. The 4-103324-0 provides 80 positions in the same 2-row configuration. This difference affects PCB footprint length and connector overall dimensions. The substitute is suitable only if the application design permits additional contact positions or if fewer positions are utilized.

Q: Why is the substitute part marked as obsolete?

A: The 4-103324-0 (AMPMODU Mod II series) is no longer manufactured by TE Connectivity. Obsolete status indicates discontinued production and limited inventory availability through distribution channels. For new designs, the active 68480-472 is the recommended choice.

Q: Are there compliance differences between these parts?

A: Both parts are RoHS non-compliant and carry UL94 V-0 flammability ratings. The contact finish differs (Tin vs. Tin-Lead), reflecting manufacturing standards of different product generations. Both maintain MSL 1 (Unlimited) moisture sensitivity ratings.

Q: What is the impact of the insulation height difference?

A: The substitute part has 0.048" (1.22mm) greater insulation height. This affects vertical clearance on the PCB and may impact board-to-board stacking or enclosure fit. Design verification is required before substitution.

Q: Can the breakaway feature of the substitute part affect compatibility?

A: The 4-103324-0 includes breakaway capability, allowing individual contact removal. The 68480-472 does not specify this feature. Breakaway functionality does not prevent substitution but may introduce additional design considerations for applications requiring fixed contact configurations.