Amphenol ICC 68464-672 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 68464-672 is a rectangular connector header designed for through-hole board-to-board applications. This BERGSTIK® II series connector features 72 positions arranged in 2 rows with 0.100" (2.54mm) pitch spacing. The part is currently active in production with 1118 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are required for applications where the original part is unavailable, discontinued, or when alternative packaging or compliance requirements necessitate component substitution.

Substiute Parts

68464-672

Amphenol ICC (FCI)In Stock: 116768464-672 Datasheet

Current PartRFQ

BBD-136-T-C

Samtec Inc.In Stock: 933BBD-136-T-C Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Amphenol ICC 68464-672 is determined by the following critical parameters:

• Connector Type: Must be Header
• Contact Type: Must be Male Pin
• Number of Positions: Must be 72
• Number of Rows: Must be 2
• Pitch - Mating: Must be 0.100" (2.54mm)
• Row Spacing - Mating: Must be 0.100" (2.54mm)
• Mounting Type: Must be Through Hole
• Termination: Must be Solder
• Style: Must be Board to Board
• Fastening Type: Must be Push-Pull
• Shrouding: Must be Unshrouded
• Number of Positions Loaded: Must be All

The Samtec Inc. BBD-136-T-C meets all mandatory substitution criteria and is classified as a manufacturer-recommended equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the Amphenol ICC 68464-672 and Samtec Inc. BBD-136-T-C are active production parts with identical core electrical and mechanical specifications for board-to-board connectivity. Selection between these parts should be based on the following factors:

Amphenol ICC 68464-672: Select this part when RoHS non-compliant components are acceptable for the application and when bulk packaging is preferred. Higher inventory availability (1118 units) supports immediate procurement.

Samtec Inc. BBD-136-T-C: Select this part when ROHS3 compliance is required. This substitute maintains functional equivalence while meeting enhanced environmental and regulatory standards. Tube packaging may be suitable for controlled inventory management.

Both parts share identical MSL ratings, ECCN classifications, and HTSUS codes, indicating equivalent handling and regulatory treatment.

Frequently Asked Questions (FAQ)

Q: Can the Samtec BBD-136-T-C directly replace the Amphenol ICC 68464-672 in existing designs?

A: Yes. Both parts meet identical specifications for connector type, position count, pitch, row spacing, mounting type, termination, and fastening. Mechanical and electrical compatibility is maintained.

Q: What is the primary difference between these two parts?

A: The primary difference is RoHS compliance status. The Samtec BBD-136-T-C is ROHS3 compliant, while the Amphenol ICC 68464-672 is RoHS non-compliant. Secondary differences include packaging format (Tube vs. Bulk) and contact geometry specifications not critical to substitution.

Q: Are there any packaging considerations when switching between these parts?

A: Yes. The Amphenol ICC 68464-672 is supplied in Bulk packaging, while the Samtec BBD-136-T-C is supplied in Tube packaging. Procurement and storage procedures may require adjustment based on packaging format.

Q: Do both parts have the same moisture sensitivity requirements?

A: Yes. Both parts are rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.

Q: Are there any export or regulatory differences between these parts?

A: No. Both parts share identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications, indicating equivalent regulatory treatment for export and tariff purposes.