Amphenol ICC 68417-112HLF Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 68417-112HLF is a rectangular connector header, right-angle mounted, 12-position configuration with 0.100" (2.54mm) pitch spacing. This through-hole component features male pins with solder termination and push-pull fastening, designed for board-to-board applications. The part is classified as obsolete, necessitating identification of active equivalent alternatives that maintain electrical and mechanical compatibility for ongoing production and repair applications.

Substiute Parts

68417-112HLF

Amphenol ICC (FCI)In Stock: 76768417-112HLF Datasheet

Current PartRFQ

68016-112HLF

Amphenol ICC (FCI)In Stock: 98568016-112HLF Datasheet

DirectRFQ

0022288124

MolexIn Stock: 11030022288124 Datasheet

MFR RecommendedRFQ

6-146132-0

TE Connectivity AMP ConnectorsIn Stock: 7336-146132-0 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 68417-112HLF is determined by the following critical parameters:

• Connector type: Header with male pin contact
• Number of positions and rows: 12 positions, single row
• Pitch spacing: 0.100" (2.54mm) mating pitch
• Mounting configuration: Right-angle orientation
• Termination method: Solder
• Fastening mechanism: Push-pull
• Contact geometry: Square shape
• Flammability compliance: UL94 V-0

Three substitute parts meet these core electrical and mechanical criteria. The primary direct substitute (68016-112HLF) is from the same manufacturer and series, with identical position count and pitch. The secondary substitutes (0022288124 and 6-146132-0) originate from different manufacturers but maintain compatible pitch, position configuration, and fastening characteristics, though with variations in mounting type and contact material specifications.

Parameter Comparison

Engineering Selection Recommendations

68016-112HLF (Amphenol ICC) is the primary recommended substitute. This part maintains identical electrical and mechanical specifications within the same BERGSTIK® II series, with active product status and RoHS compliance. The through-hole, right-angle mounting configuration directly matches the original design requirement. This substitute is suitable for direct replacement in existing PCB layouts without modification.

0022288124 (Molex KK254) serves as an alternative cross-platform substitute. While maintaining the critical 12-position, 2.54mm pitch configuration and through-hole right-angle mounting, this part features a breakaway connector type and polyamide insulation material. The contact length for mating (0.244" versus 0.230") represents a minor dimensional variance within acceptable tolerance for board-to-board applications. ROHS3 compliance and active product status support long-term availability.

6-146132-0 (TE Connectivity AMPMODU Mod II) is a surface-mount alternative suitable only for applications where PCB layout permits surface-mount termination. This part maintains the 12-position, 2.54mm pitch specification and push-pull fastening but differs fundamentally in mounting type. The tin contact finish and liquid crystal polymer insulation material represent material composition changes. This substitute is not interchangeable with through-hole designs without PCB redesign.

Frequently Asked Questions (FAQ)

Q: Can 68016-112HLF directly replace 68417-112HLF without PCB modification?

A: Yes. The 68016-112HLF maintains identical mounting type (through-hole, right-angle), position count (12), pitch spacing (2.54mm), and contact configuration. Both parts are from the same manufacturer series (BERGSTIK® II) and require no PCB layout changes.

Q: What is the primary difference between the Molex 0022288124 and the Amphenol direct substitute?

A: The Molex part features a breakaway connector design and polyamide insulation material versus the standard header configuration. The mating contact length is 0.244" compared to 0.230", a 0.014" difference. Both maintain through-hole right-angle mounting and 2.54mm pitch compatibility.

Q: Why is the TE Connectivity 6-146132-0 listed as a substitute if it uses surface-mount termination?

A: This part is included as a substitute for applications where PCB redesign to surface-mount technology is feasible. It maintains the critical electrical parameters (12 positions, 2.54mm pitch, push-pull fastening) but requires different PCB footprint and assembly process. It is not suitable for direct replacement in existing through-hole designs.

Q: Are all substitute parts RoHS compliant?

A: The 68016-112HLF and 0022288124 are RoHS compliant (RoHS and ROHS3 respectively). The 6-146132-0 is RoHS compliant. All three substitutes meet current environmental compliance requirements.

Q: What is the operating temperature range for each substitute?

A: The 68016-112HLF operates from -65°C to 130°C. The 6-146132-0 operates from -65°C to 105°C. Operating temperature data for the 0022288124 is not provided in the specification. Application requirements should determine which temperature range is appropriate.

Q: Do all substitutes have the same current rating?

A: The 68016-112HLF and 6-146132-0 are both rated for 3A. Current rating data for the 0022288124 is not provided in the specification. Applications requiring current rating confirmation should reference the 3A-rated parts.

Q: What packaging formats are available for each substitute?

A: The 68016-112HLF is supplied in bag packaging. The 0022288124 is supplied in bulk packaging. The 6-146132-0 is supplied in tube packaging. Packaging selection may affect procurement and handling procedures.