Amphenol ICC 68415-413 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 68415-413 is a through-hole rectangular connector header in the BERGSTIK® II series, configured for 13 positions at 0.100" (2.54mm) pitch. This unshrouded, single-row male pin header is designed for board-to-board applications with solder termination and push-pull fastening. The part is currently active in production with 717 units in stock.

Equivalent and substitute parts are identified when design requirements permit variations in contact length, contact finish specifications, or insulation material while maintaining core electrical and mechanical compatibility. Samtec TSW series headers provide direct functional alternatives with enhanced compliance certifications and material specifications.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Number of Positions	13
Pitch - Mating	0.100" (2.54mm)
Number of Rows	1
Mounting Type	Through Hole
Termination	Solder
Fastening Type	Push-Pull
Contact Shape	Square
Insulation Height	0.100" (2.54mm)
Material Flammability Rating	UL94 V-0
Insulation Color	Black
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the 68415-413 is determined by the following critical parameters that must remain constant:

Connector type (Header)
Contact type (Male Pin)
Number of positions (13)
Pitch - mating (0.100" / 2.54mm)
Number of rows (1)
Mounting type (Through Hole)
Fastening type (Push-Pull)
Contact shape (Square)
Insulation height (0.100" / 2.54mm)
Material flammability rating (UL94 V-0)
Insulation color (Black)

Variations permitted in substitute parts include:

Contact length - mating (0.320" to 0.400")
Contact length - post (0.110" to 0.910")
Overall contact length (0.530" to 1.330")
Contact finish - mating (Tin or Gold)
Contact finish - post (Tin or Gold)
Insulation material (Polybutylene Terephthalate vs. unspecified)
Operating temperature range (-55°C ~ 105°C to -55°C ~ 125°C)
RoHS compliance status (non-compliant to ROHS3 compliant)
Number of positions loaded (12 to All)

All substitute parts listed are from the Samtec TSW series, maintaining identical pitch, position count, and form factor while offering improved material specifications and compliance certifications.

Parameter Comparison

Parameter	68415-413 (Amphenol ICC)	TSW-113-14-L-S-LL (Samtec)	TSW-113-14-T-S-002 (Samtec)	TSW-113-16-G-S (Samtec)	TSW-113-16-S-S (Samtec)	TSW-113-16-T-S (Samtec)	TSW-113-25-T-S (Samtec)	TSW-113-29-G-S (Samtec)	TSW-113-30-T-S (Samtec)
Connector Type	Header	Header	Header	Header	Header	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Number of Positions	13	13	13	13	13	13	13	13	13
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Number of Rows	1	1	1	1	1	1	1	1	1
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Solder	Kinked Pin, Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Fastening Type	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull
Contact Length - Mating	0.400" (10.16mm)	0.320" (8.13mm)	0.320" (8.13mm)	0.320" (8.13mm)	0.320" (8.13mm)	0.320" (8.13mm)	0.320" (8.13mm)	0.320" (8.13mm)	0.320" (8.13mm)
Contact Length - Post	0.115" (2.92mm)	0.110" (2.79mm)	0.110" (2.79mm)	0.310" (7.87mm)	0.310" (7.87mm)	0.310" (7.87mm)	0.210" (5.33mm)	0.910" (23.11mm)	0.710" (18.03mm)
Overall Contact Length	0.615" (15.62mm)	0.530" (13.46mm)	0.530" (13.46mm)	0.730" (18.54mm)	0.730" (18.54mm)	0.730" (18.54mm)	0.630" (16.00mm)	1.330" (33.78mm)	1.130" (28.70mm)
Insulation Height	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Contact Shape	Square	Square	Square	Square	Square	Square	Square	Square	Square
Contact Finish - Mating	Tin	Gold	Tin	Gold	Gold	Tin	Tin	Gold	Tin
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze
Insulation Material	Not specified	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Insulation Color	Black	Black	Black	Black	Black	Black	Black	Black	Black
Operating Temperature	Not specified	-55°C ~ 125°C	-55°C ~ 105°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 125°C	-55°C ~ 105°C
RoHS Status	RoHS non-compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Number of Positions Loaded	All	All	12	All	All	All	All	All	All

Engineering Selection Recommendations

All Samtec TSW series substitutes maintain active product status and provide ROHS3 compliance, addressing regulatory requirements that the original 68415-413 does not meet. Selection among substitute parts depends on application-specific requirements for contact post length and contact finish specifications.

For applications requiring gold-plated mating contacts with enhanced corrosion resistance, TSW-113-14-L-S-LL, TSW-113-16-G-S, TSW-113-16-S-S, and TSW-113-29-G-S are suitable. These parts support operating temperatures to 125°C.

For applications with standard tin-plated contacts, TSW-113-14-T-S-002, TSW-113-16-T-S, TSW-113-25-T-S, and TSW-113-30-T-S are available. Operating temperature support ranges from 105°C to 125°C depending on the specific part number.

Contact post length variations accommodate different PCB thicknesses and stacking heights. TSW-113-14-L-S-LL and TSW-113-14-T-S-002 provide minimal post length (0.110" / 2.79mm) for thin board applications. TSW-113-25-T-S offers intermediate post length (0.210" / 5.33mm). TSW-113-16-G-S, TSW-113-16-S-S, and TSW-113-16-T-S provide extended post length (0.310" / 7.87mm). TSW-113-30-T-S and TSW-113-29-G-S provide maximum post length (0.710" / 18.03mm and 0.910" / 23.11mm respectively) for applications requiring deep board penetration.

Frequently Asked Questions (FAQ)

Q: What are the critical parameters that must match between the 68415-413 and its substitutes?

A: The following parameters must remain identical: 13-position count, 0.100" (2.54mm) pitch, single-row configuration, through-hole mounting, push-pull fastening, square contact shape, 0.100" (2.54mm) insulation height, UL94 V-0 flammability rating, and black insulation color. All listed Samtec TSW series parts meet these requirements.

Q: Can I use a substitute part with a different contact post length?

A: Yes. Contact post length variations are permitted and are determined by application requirements for PCB thickness and connector stacking height. Verify that the selected post length accommodates your board thickness and any stacking requirements. The 68415-413 specifies 0.115" (2.92mm) post length; substitute parts range from 0.110" to 0.910" depending on the model.

Q: What is the difference between tin and gold contact finishes?

A: Both finishes are acceptable substitutes. Tin-plated contacts (Tin finish) provide standard performance for general applications. Gold-plated contacts (Gold finish) offer enhanced corrosion resistance and are suitable for applications requiring extended shelf life or exposure to corrosive environments. Contact finish selection does not affect mechanical compatibility.

Q: Why do some substitute parts have only 12 positions loaded instead of all 13?

A: TSW-113-14-T-S-002 is configured with 12 positions loaded. This variation is acceptable if your application uses only 12 of the 13 available positions. Verify that your design accommodates this configuration before selection.

Q: Are all substitute parts RoHS compliant?

A: Yes. All Samtec TSW series substitutes listed are ROHS3 compliant, whereas the original 68415-413 is RoHS non-compliant. This compliance upgrade is a key advantage of substitution for applications subject to RoHS regulations.

Q: What operating temperature range should I select?

A: The 68415-413 does not specify an operating temperature range. Samtec TSW series parts support either -55°C ~ 105°C or -55°C ~ 125°C depending on the specific model. Select based on your application's thermal requirements. Parts with 125°C rating include TSW-113-14-L-S-LL, TSW-113-16-G-S, TSW-113-16-S-S, and TSW-113-29-G-S.

Q: Can I mix and match different substitute parts in the same design?

A: All listed substitutes are mechanically and electrically compatible with each other due to identical pitch, position count, and form factor. However, standardizing on a single part number within a design is recommended for supply chain consistency and manufacturing efficiency.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message