Request Quote
(Ships tomorrow)
Equivalent & Substitute Parts for Amphenol ICC 68024-136
Part Overview
The Amphenol ICC 68024-136 is a rectangular connector header, through-hole mounted, with 36 positions at 0.100" (2.54mm) pitch. This component is classified as obsolete, necessitating identification of active equivalent parts for ongoing design and procurement requirements. The BERGSTIK® II series connector provides board-to-board connectivity with unshrouded, push-pull fastening and solder termination.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Manufacturer Part Number | 68024-136 |
| Manufacturer | Amphenol ICC (FCI) |
| Series | BERGSTIK® II |
| Product Status | Obsolete |
| Connector Type | Header |
| Contact Type | Male Pin |
| Number of Positions | 36 |
| Pitch - Mating | 0.100" (2.54mm) |
| Mounting Type | Through Hole |
| Termination | Solder |
| Fastening Type | Push-Pull |
| Style | Board to Board |
| Shrouding | Unshrouded |
| Material Flammability Rating | UL94 V-0 |
| RoHS Status | RoHS non-compliant |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Substitute Part Grouping Explanation
Substitution eligibility for the 68024-136 is determined by the following critical parameters:
- Number of Positions: 36
- Pitch - Mating: 0.100" (2.54mm)
- Connector Type: Header with Male Pin contacts
- Mounting Type: Through Hole
- Termination: Solder
- Fastening Type: Push-Pull
- Style: Board to Board or Board to Board/Cable compatible
- Shrouding: Unshrouded
- Material Flammability Rating: UL94 V-0
Parts meeting these core electrical and mechanical parameters are classified as direct substitutes. The following parts satisfy these criteria:
- TE Connectivity 3-826648-6 (AMPMODU Mod II, 36-position, active status)
- TE Connectivity 8-146274-6 (AMPMODU Mod II, 36-position, active status)
- 3M 2336-6211-TG (2300 series, 36-position, active status)
- Molex 0022303363 (KK254/42375 series, 36-position, active status)
The part TE Connectivity 4-102972-0 is excluded from direct substitution due to 40-position configuration, which does not match the 36-position requirement of the main part.
Parameter Comparison
| Parameter | 68024-136 (Amphenol ICC) | 3-826648-6 (TE Connectivity) | 8-146274-6 (TE Connectivity) | 2336-6211-TG (3M) | 0022303363 (Molex) |
|---|---|---|---|---|---|
| Product Status | Obsolete | Active | Active | Active | Active |
| Number of Positions | 36 | 36 | 36 | 36 | 36 |
| Pitch - Mating | 0.100" (2.54mm) | 0.100" (2.54mm) | 0.100" (2.54mm) | 0.100" (2.54mm) | 0.100" (2.54mm) |
| Contact Type | Male Pin | Male Pin | Male Pin | Male Pin | Male Pin |
| Mounting Type | Through Hole | Through Hole | Through Hole | Through Hole | Through Hole |
| Termination | Solder | Solder | Solder | Solder | Kinked Pin, Solder |
| Fastening Type | Push-Pull | Push-Pull | Push-Pull | Push-Pull | Push-Pull |
| Style | Board to Board | Board to Board or Cable | Board to Board or Cable | Board to Board or Cable | Board to Board or Cable |
| Shrouding | Unshrouded | Unshrouded | Unshrouded | Unshrouded | Unshrouded |
| Contact Length - Mating | 0.318" (8.08mm) | 0.315" (8.00mm) | 0.318" (8.08mm) | 0.318" (8.08mm) | 0.405" (10.29mm) |
| Contact Length - Post | 0.150" (3.81mm) | 0.126" (3.20mm) | 0.125" (3.18mm) | 0.120" (3.05mm) | 0.135" (3.43mm) |
| Overall Contact Length | 0.568" (14.43mm) | 0.551" (14.00mm) | 0.533" (14.65mm) | 0.538" (13.67mm) | 0.630" (16.00mm) |
| Insulation Height | 0.100" (2.54mm) | 0.110" (2.79mm) | 0.090" (2.29mm) | 0.100" (2.54mm) | 0.090" (2.29mm) |
| Contact Shape | Square | Square | Square | Square | Square |
| Contact Finish - Mating | Gold or Gold, GXT™ | Gold | Tin | Gold | Tin |
| Material Flammability Rating | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 |
| Insulation Color | Black | Green | Black | Black | Black |
| Current Rating (Amps) | Not specified | 5A | 3A | 3A | Not specified |
| Operating Temperature | Not specified | -65°C ~ 105°C | -65°C ~ 105°C | -55°C ~ 105°C | Not specified |
| RoHS Status | RoHS non-compliant | RoHS Compliant | RoHS Compliant | ROHS3 Compliant | ROHS3 Compliant |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) |
Engineering Selection Recommendations
The 68024-136 is obsolete and requires substitution for new designs and ongoing procurement. All four identified substitute parts meet the core electrical and mechanical parameters for direct replacement.
For RoHS compliance requirements, the following active parts are suitable:
- TE Connectivity 3-826648-6: RoHS Compliant, 5A current rating, -65°C to 105°C operating range
- TE Connectivity 8-146274-6: RoHS Compliant, 3A current rating, -65°C to 105°C operating range
- 3M 2336-6211-TG: ROHS3 Compliant, 3A current rating, -55°C to 105°C operating range
- Molex 0022303363: ROHS3 Compliant, -65°C to 105°C operating range (current rating not specified)
For applications requiring higher current capacity, TE Connectivity 3-826648-6 provides 5A rating. For applications with extended low-temperature requirements below -55°C, TE Connectivity parts (3-826648-6 or 8-146274-6) support -65°C minimum operating temperature.
Contact finish differences exist among substitutes. The original part specifies gold or gold GXT™ finish. TE Connectivity 3-826648-6 and 3M 2336-6211-TG provide gold mating contact finish. TE Connectivity 8-146274-6 and Molex 0022303363 provide tin mating contact finish.
Frequently Asked Questions (FAQ)
Q: Can TE Connectivity 4-102972-0 be used as a substitute?
A: No. The 4-102972-0 is a 40-position connector, while the 68024-136 requires 36 positions. Position count is a critical parameter that must match exactly for proper mating and functionality.
Q: What is the primary reason for substitution?
A: The 68024-136 is classified as obsolete. Active substitute parts ensure long-term availability and support for new designs and production requirements.
Q: Are all substitute parts RoHS compliant?
A: Yes. All four substitute parts are RoHS compliant (either RoHS or ROHS3 status). The original 68024-136 is RoHS non-compliant.
Q: Do the substitute parts have different physical dimensions?
A: Minor variations exist in contact length and insulation height among substitutes. The overall contact length ranges from 0.533" to 0.630", and insulation height ranges from 0.090" to 0.110". These variations may affect PCB layout and mating depth. Verify mechanical compatibility with your specific application.
Q: Which substitute offers the highest current rating?
A: TE Connectivity 3-826648-6 provides 5A current rating, compared to 3A for TE Connectivity 8-146274-6 and 3M 2336-6211-TG.
Q: What is the difference between gold and tin contact finishes?
A: Contact finish affects electrical performance and environmental resistance. Gold finish (3-826648-6, 2336-6211-TG) provides superior corrosion resistance. Tin finish (8-146274-6, 0022303363) is cost-effective for standard applications. Selection depends on environmental exposure and reliability requirements.
Q: Are all substitutes available in the same packaging?
A: All substitute parts are available in bulk packaging. Verify packaging requirements with your procurement specifications.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts