Amphenol ICC 68022-406 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 68022-406 is a rectangular connector header, right-angle configuration, with 6 positions at 2.54mm pitch. This through-hole component is designed for board-to-board connections with solder termination and push-pull fastening. The part is classified as obsolete, making equivalent substitutes necessary for new designs and ongoing production support. Active alternatives from Molex and TE Connectivity provide functional equivalence with improved compliance status and availability.

Substiute Parts

68022-406

Amphenol ICC (FCI)In Stock: 66168022-406 Datasheet

Current PartRFQ

0010883062

MolexIn Stock: 7290010883062 Datasheet

MFR RecommendedRFQ

0010894063

MolexIn Stock: 10820010894063 Datasheet

MFR RecommendedRFQ

0010894067

MolexIn Stock: 10360010894067 Datasheet

MFR RecommendedRFQ

4-103324-0

TE Connectivity AMP ConnectorsIn Stock: 9724-103324-0 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the 68022-406 is determined by strict alignment of the following critical parameters:

• Pitch - Mating: 0.100" (2.54mm)
• Number of Positions: 6
• Number of Rows: 2
• Row Spacing - Mating: 0.100" (2.54mm)
• Connector Type: Header
• Contact Type: Male Pin
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Fastening Type: Push-Pull
• Material Flammability Rating: UL94 V-0

The substitute parts identified—Molex 0010883062, 0010894063, 0010894067, and TE Connectivity 4-103324-0—meet these core electrical and mechanical parameters. Variations in contact finish (tin vs. gold), contact finish thickness, and insulation material do not prevent functional substitution when electrical requirements are satisfied. The Molex parts are active products with ROHS3 compliance, while the TE Connectivity part remains obsolete but shares the same dimensional and electrical specifications.

Parameter Comparison

Engineering Selection Recommendations

For new designs and production applications requiring a 6-position, 2.54mm pitch right-angle header connector, the Molex C-Grid 70216 series parts (0010883062, 0010894063, 0010894067) are the primary substitutes. These parts are active products with ROHS3 compliance, ensuring regulatory alignment and long-term availability. The Molex 0010883062 offers tin contact finish matching the original specification, while 0010894063 and 0010894067 provide gold plating for enhanced corrosion resistance in demanding environments.

The TE Connectivity 4-103324-0 (AMPMODU Mod II series) is functionally equivalent but carries obsolete status and RoHS non-compliance, limiting its suitability for new designs. This part is suitable only for legacy system maintenance where existing inventory or design constraints require it.

For applications with RoHS compliance requirements, Molex substitutes are mandatory. For applications without RoHS constraints, all four substitutes maintain electrical and mechanical compatibility with the 68022-406.

Frequently Asked Questions (FAQ)

Q: Can Molex 0010883062 directly replace Amphenol ICC 68022-406 in existing designs?

A: Yes. Both parts share identical pitch (2.54mm), position count (6), row configuration (2 rows), mounting type (through-hole right-angle), and fastening mechanism (push-pull). The tin contact finish on 0010883062 matches the original specification. PCB footprints and mating connector compatibility are preserved.

Q: What is the difference between Molex 0010894063 and 0010894067?

A: Both parts are identical except for contact finish thickness on the mating surface. 0010894063 has 15.0µin (0.38µm) gold plating, while 0010894067 has 30.0µin (0.76µm) gold plating. The thicker gold layer on 0010894067 provides extended contact life in high-cycle mating applications. Both are functionally equivalent for standard applications.

Q: Why is TE Connectivity 4-103324-0 listed as a substitute if it has 80 positions?

A: The 4-103324-0 is a modular connector with 80 total positions but maintains the same 2.54mm pitch, row spacing, and right-angle through-hole configuration. It can be used in applications where the connector is broken away or segmented to 6 positions, though this is not a standard practice. For direct 6-position replacement, Molex parts are preferred.

Q: Are there compliance differences between the substitutes?

A: Yes. Molex parts (0010883062, 0010894063, 0010894067) are ROHS3 compliant and REACH unaffected, meeting modern regulatory requirements. The original 68022-406 and TE Connectivity 4-103324-0 are RoHS non-compliant. For applications subject to RoHS directives, Molex substitutes are required.

Q: Can I use a gold-plated substitute (0010894063 or 0010894067) in place of the tin-plated original?

A: Yes. Gold plating is compatible with all mating connectors designed for tin-plated headers. Gold provides superior corrosion resistance and is suitable for all applications where tin is acceptable. No design changes are required.

Q: What is the inventory status of these substitutes?

A: Molex 0010883062 has 688 units in stock, 0010894063 has 1003 units, and 0010894067 has 993 units. All are available as new original parts. TE Connectivity 4-103324-0 has 939 units in stock but is obsolete.