Amphenol ICC 68021-110 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 68021-110 is a rectangular connector header, right-angle configuration, with 10 positions at 2.54mm pitch. This through-hole component is part of the BERGSTIK® II series and is classified as obsolete. Due to its obsolete status and limited availability for new designs, equivalent substitute parts from active product lines are necessary to ensure long-term supply chain reliability and design continuity.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Pitch - Mating	0.100" (2.54mm)
Number of Positions	10
Number of Rows	2
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Fastening Type	Push-Pull
Style	Board to Board
Shrouding	Unshrouded
Operating Temperature	-65°C ~ 125°C
Current Rating	3A per Contact
Voltage Rating	110V
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS non-compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict alignment with the following core parameters:

Pitch - Mating: 0.100" (2.54mm)
Number of Positions: 10
Number of Rows: 2
Row Spacing - Mating: 0.100" (2.54mm)
Mounting Type: Through Hole, Right Angle
Termination: Solder
Fastening Type: Push-Pull
Style: Board to Board
Shrouding: Unshrouded
Contact Type: Male Pin

All substitute parts listed meet these core dimensional and functional requirements. Variations in contact finish, insulation material, and operating temperature ranges are secondary parameters that do not prevent functional substitution when the primary mechanical and electrical interfaces are identical.

Parameter Comparison

Parameter	68021-110 (Main)	802-40-010-20-001000	802-V3-010-20-001101	892-18-010-20-002101	892-80-010-20-002101	M20-9740542	M20-9740546
Manufacturer	Amphenol ICC	Mill-Max	Preci-Dip	Preci-Dip	Preci-Dip	Harwin	Harwin
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Number of Positions	10	10	10	10	10	10	10
Number of Rows	2	2	2	2	2	2	2
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Fastening Type	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull
Style	Board to Board	Board to Board	Board to Board	Board to Board	Board to Board	Board to Board or Cable	Board to Board or Cable
Shrouding	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded	Unshrouded
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Contact Shape	Square	Circular	Circular	Square	Square	Square	Square
Contact Finish - Mating	Gold or Gold, GXT™	Tin	Gold	Gold	Tin	Gold	Tin
Current Rating	3A per Contact	Not specified	3A	3A	3A	3A per Contact	3A per Contact
Operating Temperature	-65°C ~ 125°C	Not specified	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-40°C ~ 105°C	-40°C ~ 105°C
Material Flammability Rating	UL94 V-0	Not specified	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	RoHS non-compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Obsolete	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

All listed substitute parts maintain functional compatibility with the 68021-110 through identical core mechanical and electrical parameters. Selection among substitutes should be based on the following criteria:

Active Product Status Priority: Parts 802-40-010-20-001000, 802-V3-010-20-001101, 892-18-010-20-002101, 892-80-010-20-002101, M20-9740542, and M20-9740546 are all active products with assured long-term availability, unlike the obsolete 68021-110.

RoHS Compliance: All substitute parts are ROHS3 compliant, whereas the original part is RoHS non-compliant. For applications requiring RoHS compliance, any substitute part is suitable.

Operating Temperature Range: The 68021-110 operates from -65°C to 125°C. Preci-Dip parts (802-V3, 892 series) maintain the upper temperature limit of 125°C with a lower limit of -55°C. Harwin M20 series parts operate from -40°C to 105°C, which may not be suitable for applications requiring the full -65°C lower temperature specification.

Contact Finish Variations: Gold-plated mating contacts are available in 802-V3-010-20-001101, 892-18-010-20-002101, and M20-9740542. Tin-plated alternatives are available in 802-40-010-20-001000, 892-80-010-20-002101, and M20-9740546. Contact finish selection depends on application corrosion resistance requirements.

Connector Flexibility: Harwin M20 series parts offer cuttable connector capability and board-to-board or cable style flexibility, providing design flexibility not present in other substitutes.

Frequently Asked Questions (FAQ)

Q: Can the 68021-110 be directly replaced with any of these substitute parts?

A: Yes, all listed parts are mechanically and electrically compatible due to identical pitch (2.54mm), position count (10), row configuration (2 rows), mounting type (through-hole right-angle), and termination method (solder). Physical board layout compatibility is maintained.

Q: What is the primary reason to switch from the 68021-110?

A: The 68021-110 is classified as obsolete. Substitute parts from active product lines ensure continued availability for production and future design iterations.

Q: Are there temperature range limitations with any substitute?

A: Harwin M20 series parts (M20-9740542, M20-9740546) operate from -40°C to 105°C, which does not cover the full -65°C lower temperature specification of the original part. For applications requiring -65°C operation, select Preci-Dip 802-V3 or 892 series parts instead.

Q: What is the difference between gold and tin contact finishes?

A: Both finishes provide electrical conductivity and are functionally equivalent for standard applications. Gold finishes offer superior corrosion resistance in high-humidity or corrosive environments. Tin finishes are suitable for standard indoor applications. Selection depends on environmental exposure requirements.

Q: Does RoHS compliance matter for my application?

A: RoHS compliance is mandatory for products sold in the European Union and many other regions. All substitute parts are ROHS3 compliant, whereas the original 68021-110 is not. If your application or market requires RoHS compliance, any substitute part satisfies this requirement.

Q: Can I use the Harwin M20 series if my application requires -65°C operation?

A: No. Harwin M20 parts operate only to -40°C minimum. For applications requiring -65°C operation, use Preci-Dip 802-V3-010-20-001101, 892-18-010-20-002101, or 892-80-010-20-002101 instead.

Q: What is the difference between square and circular contact shapes?

A: Both contact shapes provide equivalent electrical performance and mechanical retention in this connector family. The shape difference does not affect substitution compatibility. Mill-Max 802 series parts feature circular contacts, while Preci-Dip 892 series and Harwin M20 series feature square contacts.

Q: Are packaging differences significant for component selection?

A: Packaging (tube, bulk) affects handling and storage but does not impact electrical or mechanical performance. Select based on your procurement and assembly process requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message