Amphenol ICC 68016-336 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 68016-336 is a rectangular connector header featuring a right-angle, through-hole mount configuration with 36 positions at 2.54mm pitch. This connector is part of the BERGSTIK® II series and is designed for board-to-board applications with solder termination and push-pull fastening. The product is currently obsolete, making identification of active equivalent parts essential for ongoing design support and procurement.

Substiute Parts

68016-336

Amphenol ICC (FCI)In Stock: 88068016-336 Datasheet

Current PartRFQ

8-146304-6

TE Connectivity AMP ConnectorsIn Stock: 12258-146304-6 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The TE Connectivity AMP Connectors part number 8-146304-6 qualifies as a substitute for the Amphenol ICC 68016-336 based on the following critical parameters:

• Connector Type & Contact Configuration: Both are male pin headers with identical 36-position, single-row configuration
• Pitch Specification: Both maintain 0.100" (2.54mm) mating pitch
• Mounting & Termination: Both feature through-hole, right-angle mounting with solder termination
• Contact Dimensions: Mating contact length (0.230" / 5.84mm) and post length (0.120" / 3.05mm) are identical
• Current Rating: Both rated for 3A
• Fastening Type: Both use push-pull fastening
• Flammability Compliance: Both meet UL94 V-0 material flammability rating
• Moisture Sensitivity: Both classified as MSL 1 (Unlimited)

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity 8-146304-6 serves as the primary active substitute for the obsolete Amphenol ICC 68016-336. Selection of this substitute is supported by the following factors:

Product Status: The 68016-336 is obsolete, while the 8-146304-6 maintains active product status with current manufacturing and inventory availability (1115 pcs in stock versus 830 pcs for the obsolete part).

Regulatory Compliance: The 8-146304-6 is RoHS Compliant, whereas the original part is RoHS non-compliant. This substitution aligns designs with current environmental and regulatory requirements.

Mechanical & Electrical Compatibility: Critical parameters including connector type, contact configuration, pitch, mounting method, termination, contact dimensions, current rating, and flammability rating are identical or compatible between both parts.

Design Considerations: The substitute exhibits a higher insulation height (0.138" versus 0.095"), a lower mating contact finish thickness (30.0µin versus 50.0µin), and a reduced maximum operating temperature (105°C versus 130°C). These differences must be evaluated against specific application requirements to confirm suitability.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 8-146304-6 be used as a direct replacement for the Amphenol ICC 68016-336?

A: The 8-146304-6 is mechanically and electrically compatible for most applications. Both connectors share identical pitch (2.54mm), position count (36), contact dimensions, current rating (3A), and mounting configuration. However, the substitute has a lower maximum operating temperature (105°C versus 130°C) and higher insulation height (0.138" versus 0.095"), which must be verified against application requirements.

Q: What are the key differences between these two connectors?

A: The primary differences are: operating temperature range (8-146304-6 is limited to -65°C ~ 105°C), insulation height (0.138" versus 0.095"), contact finish thickness (30.0µin versus 50.0µin), contact material (Copper Alloy versus Phosphor Bronze), and RoHS compliance status (compliant versus non-compliant).

Q: Why is the original part obsolete?

A: The Amphenol ICC 68016-336 is classified as obsolete, indicating it is no longer in active production. The TE Connectivity 8-146304-6 represents the current active equivalent in the market.

Q: Are there packaging differences between these parts?

A: The 68016-336 packaging information is not specified in available data. The 8-146304-6 is supplied in Tray packaging. Packaging format should be confirmed with suppliers based on procurement requirements.

Q: What is the significance of the insulation height difference?

A: The 8-146304-6 has an insulation height of 0.138" compared to 0.095" for the 68016-336. This difference affects the physical profile of the connector and must be verified for compatibility with PCB layout, mating receptacles, and mechanical clearances in the application.

Q: Does the lower contact finish thickness on the substitute affect performance?

A: The 8-146304-6 has a mating contact finish thickness of 30.0µin (0.76µm) versus 50.0µin (1.27µm) on the original part. Both maintain gold plating and meet the same flammability and current rating specifications. The difference should be evaluated based on application-specific contact wear and durability requirements.

Q: Is the lower maximum operating temperature of the substitute a concern?

A: The 8-146304-6 is rated to 105°C maximum, while the 68016-336 is rated to 130°C. If the application requires sustained operation above 105°C, the substitute may not be suitable. Applications operating within -65°C to 105°C will not be affected.