Amphenol ICC 68016-236H Rectangular Connector - Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 68016-236H is a through-hole, right-angle rectangular connector header with 36 positions at 0.100" (2.54mm) pitch, designed for board-to-board applications. This component is classified as obsolete, making identification of active equivalent parts essential for ongoing production and maintenance applications. The substitute part 68016-236HLF provides functional equivalence with updated product status and compliance certifications.

Substiute Parts

68016-236H

Amphenol ICC (FCI)In Stock: 79268016-236H Datasheet

Current PartRFQ

68016-236HLF

Amphenol ICC (FCI)In Stock: 257468016-236HLF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The 68016-236HLF qualifies as a direct substitute for the 68016-236H based on identical electrical and mechanical parameters. Substitution is valid when the following criteria are met:

• Connector type, contact type, and position count are identical (Header, Male Pin, 36 positions)
• Pitch and mating contact length are identical (0.100" / 2.54mm and 0.230" / 5.84mm)
• Post length, insulation height, and contact material are identical (0.120" / 3.05mm, 0.095" / 2.41mm, Phosphor Bronze)
• Current rating and operating temperature range are identical (3A, -65°C ~ 130°C)
• Contact finish specification and flammability rating are identical (Gold or Gold, GXT™; UL94 V-0)
• Mounting type and termination method are identical (Through Hole, Right Angle; Solder)

Parameter Comparison

Engineering Selection Recommendations

The 68016-236HLF is the appropriate selection for new designs and production applications. The 68016-236H, classified as obsolete, should be replaced with the 68016-236HLF in active production environments. The substitute part maintains full electrical and mechanical compatibility while offering active product status and RoHS compliance. The transition from non-compliant to RoHS-compliant status aligns with current regulatory requirements for electronic component procurement.

Frequently Asked Questions (FAQ)

Q: Are the 68016-236H and 68016-236HLF mechanically interchangeable?

A: Yes. Both parts share identical mounting type (through-hole, right-angle), position count (36), pitch (0.100" / 2.54mm), contact dimensions, and insulation height. Direct substitution is valid for board-level applications.

Q: What is the primary difference between these two parts?

A: The 68016-236HLF is the active production equivalent of the obsolete 68016-236H. The substitute part includes RoHS compliance certification and bulk packaging, while maintaining identical electrical and mechanical specifications.

Q: Can the 68016-236H be used in new designs?

A: No. The obsolete status of the 68016-236H makes it unsuitable for new production. The 68016-236HLF should be specified for all new designs and procurement.

Q: Are there any compliance differences between these parts?

A: The 68016-236HLF is RoHS compliant and REACH affected, while the 68016-236H is RoHS non-compliant. For applications subject to RoHS or REACH regulations, the 68016-236HLF is the required selection.

Q: What is the current rating for this connector?

A: Both parts are rated for 3A per contact at the specified operating temperature range of -65°C to 130°C.

Q: Does packaging differ between these parts?

A: Yes. The 68016-236H packaging is unspecified, while the 68016-236HLF is supplied in bulk packaging. Verify packaging requirements for your procurement process.