Amphenol ICC 68015-409 Equivalent & Substitute Parts

Part Overview

The Amphenol ICC 68015-409 is a rectangular connector header, right-angle configuration, with 9 positions at 0.100" (2.54mm) pitch. This through-hole, board-to-board connector features male pins with solder termination and push-pull fastening. The part is classified as obsolete, making identification of equivalent alternatives essential for ongoing design support and procurement planning.

Substiute Parts

68015-409

Amphenol ICC (FCI)In Stock: 85668015-409 Datasheet

Current PartRFQ

4-103759-0

TE Connectivity AMP ConnectorsIn Stock: 10984-103759-0 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Amphenol ICC 68015-409 is determined by the following critical parameters:

• Pitch - Mating: 0.100" (2.54mm) — must match for mechanical and electrical compatibility
• Connector Type: Header with male pins — functional requirement for board-to-board connection
• Mounting Type: Through Hole, Right Angle — PCB layout constraint
• Termination: Solder — assembly process requirement
• Fastening Type: Push-Pull — mechanical engagement standard
• Contact Finish - Mating: Tin or equivalent — electrical interface specification
• Material Flammability Rating: UL94 V-0 — safety compliance requirement

The substitute part TE Connectivity AMP Connectors 4-103759-0 shares these core parameters. However, this part is a 40-position breakaway header, which represents a different position count than the original 9-position configuration. Substitution is valid only when the application can accommodate the higher position count or when individual positions are utilized from the breakaway header.

Parameter Comparison

Engineering Selection Recommendations

Both the Amphenol ICC 68015-409 and TE Connectivity AMP Connectors 4-103759-0 are classified as obsolete products. Selection between these parts must account for the following factors:

Compatibility Constraints: The primary difference is position count: 9 positions versus 40 positions. The 4-103759-0 is a breakaway header, allowing individual positions to be separated. This design permits use in applications requiring fewer positions, but PCB layout and mechanical clearance must accommodate the larger insulation height (0.138" versus 0.095").

Compliance Alignment: Both parts carry identical flammability ratings (UL94 V-0) and moisture sensitivity levels (MSL 1). Both are RoHS non-compliant. No compliance advantage exists between the two options.

Contact and Termination Specifications: Contact finish differs: the original uses tin, while the substitute uses tin-lead. Contact material differs: phosphor bronze versus copper alloy. These differences do not preclude substitution but should be evaluated against application requirements for electrical performance and corrosion resistance.

Electrical Ratings: The substitute part specifies a 3A current rating and -65°C to 105°C operating temperature range. The original part does not provide these specifications. If the application requires these electrical parameters, the substitute part provides documented performance data.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 4-103759-0 directly replace the Amphenol ICC 68015-409?

A: Direct replacement is possible only if the application can accommodate the 40-position breakaway header. The 4-103759-0 can be configured to use only 9 positions through selective population or mechanical separation. PCB layout must account for the increased insulation height (0.138" versus 0.095").

Q: What are the key compatibility criteria for substitution?

A: The critical parameters are pitch (0.100" / 2.54mm), connector type (header with male pins), mounting type (through-hole right-angle), termination (solder), and fastening type (push-pull). Both parts meet these requirements.

Q: Does the difference in contact finish (tin versus tin-lead) affect compatibility?

A: Contact finish affects electrical interface characteristics and corrosion resistance but does not prevent mechanical or electrical substitution. Tin-lead finish (4-103759-0) provides different contact wear and oxidation properties compared to tin finish (68015-409). Application-specific requirements determine acceptability.

Q: Are there differences in insulation material between these parts?

A: The original part does not specify insulation material. The substitute part uses thermoplastic insulation. Both maintain UL94 V-0 flammability rating. Thermoplastic insulation is standard for modern connector designs and does not indicate incompatibility.

Q: What is the significance of the breakaway design in the 4-103759-0?

A: The breakaway design allows individual positions to be separated from the 40-position header. This provides flexibility for applications requiring fewer positions without requiring a custom part. Separation must be performed according to TE Connectivity specifications to maintain electrical and mechanical integrity.

Q: Are both parts suitable for new designs?

A: Both parts are classified as obsolete. Neither is recommended for new designs. Current-generation alternatives from both manufacturers should be evaluated for new applications requiring rectangular connectors with 2.54mm pitch headers.